Class 8 Exam  >  Class 8 Notes  >  Lakhmir Singh & Manjit Kaur Solutions: Class 8 Science  >  Lakhmir Singh & Manjit Kaur: Combustion and Flame- 1

Lakhmir Singh & Manjit Kaur: Combustion and Flame- 1 | Lakhmir Singh & Manjit Kaur Solutions: Class 8 Science PDF Download

Very Short Answer Type Questions

Q.1. Define the ignition temperature of a substance.

Ignition temperature is the lowest temperature at which a substance catches fire. Ignition temperature is different for different substances. For example; LPG, petrol, natural gas, etc. catch fire at very low temperature and thus have low ignition temperature, while wood, coal, etc. have high ignition temperature.


Q.2. Which of the two has a lower ignition temperature: petrol or kerosene?

Petrol has a lower ignition temperature. Kerosene molecules are larger than petrol molecules and hence don’t mix easily with oxygen present in the air. Thus, it has a higher ignition temperature than petrol.


Q.3. Name the most common fire extinguisher.

There are mainly five types of fire extinguishers – Water, Foam, Dry Powder, CO2, and Wet chemicals. Water is one of the best, cheapest, and most common fire extinguishers.

  • Water fire extinguisher
  • Foam fire extinguisher
  • Dry Powder fire extinguisher
  • CO2 fire extinguisher and,
  • Wet Chemical fire extinguisher. Water is one of the best, cheapest, and most common fire extinguishers.
  • Out of all these, the Water fire extinguisher is one of the best, cheapest, and most common fire extinguishers.


Q.4. Which is the best fire extinguisher for fires involving electrical equipment and inflammable materials like petrol? 

Carbon dioxide does not support combustion and hence is considered as the best fire extinguisher for fires involving electrical equipment and inflammable materials like petrol.


Q.5. Name one substance which undergoes spontaneous combustion(or burns in air at room temperature). 

When white phosphorus is left out open in the room temperature for sometime, it burns all by itself.


Q.6. Name the unit in which the calorific value is expressed. 

It is measured in units of energy per unit of the mass of the substance, such as: kJ/kg, J/Kg.


Q.7. Which of the following fuels has the lowest calorific value? 

Coal has the lowest calorific value. Coal contains moisture. When coal burns the moisture in coal evaporates taking away some heat of combustion which is not available for our use.


Q.8. Which of the following fuels has the highest calorific value?
Diesel, Methane, CNG, Coal, Petrol 

CNG and methane have the highest calorific value. Both of them have calorific value of 50000 KJ/Kg.


Q.9. Name the term which is used to express the efficiency of a fuel. 

Calorific Value is the term which is used to express the efficiency of a fuel.


Q.10. Name one solid, one liquid and one gas which burn by producing a flame. 

Molten wax(Solid), Kerosene oil(Liquid) and LPG(gas) are the substances which burn by producing flames.


Q.11. Which of the following does not produces a flame on burning? 

Charcoal does not vaporize and so does not produce a flame.


Q.12. Name one fuel which burn without producing a flame. 

Charcoal does not vaporize and so does not produce a flame.


Q.13. How many Zones are there in a flame? 

A flame consist of three zones. These are Innermost zone, middle zone, outer zone. The three zones of a flame have different colors and different temperature.


Q.14. Which zone of a candle flame is the hottest? 

The outermost zone has the highest temperature in the flame. It is the hottest part of the flame. It is quite thin as compared to middle zone.


Q.15. In a candle flame, what is the colour of:
(a) innermost zone
(b) middle zoneand
(c) outer zone? 

(a) innermost zone- The Innermost zone of a flame is dark or black
(b) middle zone- The middle zone of a flame is yellow
(c) outer zone- The outer zone of a flame is blue. It is a non-luminous zone


Q.16. Name any harmful product released by the burning of fuels. 

Incomplete combustion of fuels produces a very poisonous gas called carbon monoxide.


Q.17. Name the very poisonous gas produced by the incomplete combustion of fuels. 

Incomplete combustion of fuels produces a very poisonous gas called carbon monoxide.


Q.18. Name the fuel which is gradually replacing petrol and diesel in automobiles. 

The use of diesel and petrol as fuels in automobiles is being replaced by CNG (Compressed Natural Gas), because CNG produces the harmful products in very small amounts. CNG is a cleaner fuel.


Q.19. Name two substance having low ignition temperature and two having high ignition temperatures. 

LPG and petrol catch fire at very low temperature and thus have low ignition temperature, while wood and coal have high ignition temperature.


Q.20. Fill in the blanks with suitable words:
(a) A fuel must be heated to its ________ before it starts burning.
(b) The most common supporter of combustion around us is ________
(c) Fire produced by burning oil cannot be controlled by ________
(d) A liquid fuel used in homes is ________
(e) The amount of heat evolved when 1kg of a fuel is burnt completely is called its ________
(f) The substance which vaporize during, give ________
(g) Burning of wood and coal causes ________ of air.

(a) Ignition temperature
(b) Air
(c) Water
(d) Kerosene
(e) Calorific value
(f) Flames
(g) Pollution

Short Answer Type Questions

Q.21. 
(A) What are fuels? Name any two common fuel.

A fuel is a very good source of heat. The heat energy produced by burning a fuel can be used directly to cook food, for running motor vehicles and factory machines, can be converted into electrical energy at thermal power stations. Wood and Petrol are examples of two common fuels.

(B) State any four characteristic of an ideal fuel(or good fuel).

Characteristics of ideal fuel-

  • It has a high calorific value
  • It burns easily in air at a moderate rate
  • It has proper ignition temperature
  • It does not produce any harmful gases or leaves any residue after burning.


Q.22.
(A) Define the calorific value of a fuel.

The amount of heat produced by the complete burning or combustion of 1 Kilo gram of a fuel is called its calorific value. The calorific value of a fuel is expressed in the unit of Kilo joules per kilogram.

(B) “The calorific value of LPG is 55000 KJ/kg”. What does it mean?

The calorific value of LPG is 55000 KJ/Kg. It means when 1 Kg of LPG is burned completely, then 55000 KJ of heat energy is produced.


Q.23. Can you burn a piece of wood by bringing a lighted matchstick near it? Explain.

A matchstick can light a tiny splinter of wood but not a big log of wood. A splinter of wood has a low ignition temperature. A burning matchstick can produce sufficient heat to reach the ignition temperature of the splinter of wood therefore a matchstick can light a splinter of wood directly.


Q.24. Why do you have to use paper or kerosene oil to start fire in wood or coal?

The ignition temperature of wood or coal is very high, as it requires too much of time to get heated before burning. We use paper or kerosene to start fire because they have low ignition temperature which helps to catch fire immediately and helps the wood or the coal to reach its required ignition temperature.


Q.25. What is meant by rapid combustion? Give one example of rapid combustion.

Rapid combustion is the combustion in which a substance burns rapidly with the help of an external source and produces heat within a very short time. Eg:- Burning of LPG.


Q.26. What is meant spontaneous combustion? Give one example of spontaneous combustion.

Spontaneous combustion is the combustion in which a substance burns spontaneously and produces heat and light without the help of external source of heat. Eg:- phosphorus burns spontaneously at room temperature.


Q.27. What is meant by explosive combustion (or explosion)? Give one example of explosive combustion (or explosion). 

Explosive combustion is the combustion in which a substance burns suddenly and produces heat, light and sound with the help of external source of heat or pressure. Eg:- explosion of crackers on applying heat or pressure.


Q.28. How will you show that air is necessary of combustion? 

Oxygen helps in combustion. Air contains about 29% of oxygen, thus supply of air makes the oxygen available which helps in combustion. Without oxygen, combustion will not take place.


Q.29. Can the process of rusting be called combustion? Give reason for your Answer. 

Combustion is a chemical process in which a substance reacts with oxygen and gives out energy during the process in the form of either heat or light or both. Rusting of iron is an exothermic process as heat is released during rusting. Hence, it is a kind of slow combustion.


Q.30. Why are fires produced by burning oil not extinguished by pouring water?

As water is heavier than petrol therefore slips down permitting the petrol to rise to the surface and continue to burn. Besides, the existing temperature is so high that the water poured on the fire evaporates even before it can extinguisher the fire.

The document Lakhmir Singh & Manjit Kaur: Combustion and Flame- 1 | Lakhmir Singh & Manjit Kaur Solutions: Class 8 Science is a part of the Class 8 Course Lakhmir Singh & Manjit Kaur Solutions: Class 8 Science.
All you need of Class 8 at this link: Class 8
53 docs

Top Courses for Class 8

FAQs on Lakhmir Singh & Manjit Kaur: Combustion and Flame- 1 - Lakhmir Singh & Manjit Kaur Solutions: Class 8 Science

1. What is combustion?
Ans. Combustion is a chemical reaction in which a substance combines rapidly with oxygen to release heat and light. It is a process of burning that results in the production of heat, light, and various gases.
2. How does combustion occur?
Ans. Combustion occurs when a fuel combines with oxygen in the presence of heat or a flame. The fuel undergoes a chemical reaction with oxygen, resulting in the release of energy in the form of heat and light.
3. What are the different types of combustion?
Ans. There are three main types of combustion: complete combustion, incomplete combustion, and spontaneous combustion. In complete combustion, the fuel reacts completely with oxygen, producing carbon dioxide and water. In incomplete combustion, the fuel does not react completely, resulting in the production of carbon monoxide and soot. Spontaneous combustion occurs when a substance ignites without an external ignition source.
4. What is the importance of combustion in our daily lives?
Ans. Combustion plays a crucial role in our daily lives. It is used for cooking, heating, transportation, and generating electricity. The combustion of fossil fuels such as coal, oil, and natural gas is the primary source of energy for various industrial and domestic purposes.
5. What safety measures should be taken during combustion?
Ans. Safety measures during combustion include ensuring proper ventilation, using flame-retardant materials, keeping flammable substances away from open flames, and regularly maintaining and inspecting combustion devices. It is also important to have fire extinguishers and smoke detectors installed in buildings to prevent and control fires.
53 docs
Download as PDF
Explore Courses for Class 8 exam

Top Courses for Class 8

Signup for Free!
Signup to see your scores go up within 7 days! Learn & Practice with 1000+ FREE Notes, Videos & Tests.
10M+ students study on EduRev
Related Searches

Extra Questions

,

shortcuts and tricks

,

practice quizzes

,

past year papers

,

Important questions

,

Sample Paper

,

pdf

,

Viva Questions

,

Previous Year Questions with Solutions

,

MCQs

,

Lakhmir Singh & Manjit Kaur: Combustion and Flame- 1 | Lakhmir Singh & Manjit Kaur Solutions: Class 8 Science

,

ppt

,

video lectures

,

Exam

,

mock tests for examination

,

Objective type Questions

,

Semester Notes

,

Lakhmir Singh & Manjit Kaur: Combustion and Flame- 1 | Lakhmir Singh & Manjit Kaur Solutions: Class 8 Science

,

Summary

,

study material

,

Free

,

Lakhmir Singh & Manjit Kaur: Combustion and Flame- 1 | Lakhmir Singh & Manjit Kaur Solutions: Class 8 Science

;