Past Year Questions: Fatigue Strength And S-N Diagram - Mechanical Engineering MCQ
10 Questions MCQ Test - Past Year Questions: Fatigue Strength And S-N Diagram
A ductile material having an endurance limit of 196 N/mm2 and the yield point at 294 N/mm2 is stressed under variable load. The maximum and minimum stresses are 147 N/mm2 and 49 N/mm2. The fatigue stress concentration factor is 1.32. The available factor of safety for this loading is
[1987]
Stress concentration in a machine component of a ductile material is not so harmful as it is in a brittle material because
[1989]
| 1 Crore+ students have signed up on EduRev. Have you? Download the App |
The process of shot peening increases the fatigue life of steel springs mainly because it results in
[1990]
The yield strength of a steel shaft is twice its endurance limit. Which of the following torque fluctuations represent the most critical situation according to Soderberg criterion?
[1993]
A static load is mounted at the centre of a shaft rotating at uniform angular velocity. This shaft will be designed for
[2002]
Which one of the following is the most conservation fatigue failure criterion?
[2015, Set-1]
In terms of theoretical stress concentration factor kt and fatigue stress concentration factor kt, the notch sensitivity q is expressed as
[2004]
The S-N curve for steel becomes asymptotic nearly at
[2004]
A cylindrical shaft is subjected to an alternating stress of 100 MPa. Fatigue strength to sustain 1000 cycles is 490 MPa. If the corrected endurance strength is 70 MPa, estimated shaft life will be
[2006]
Endurance limit of a beam subjected to pure bending decreases with
[2019 , Set 2]
Top Courses for Mechanical Engineering
Important Questions for Past Year Questions: Fatigue Strength And S-N Diagram
Past Year Questions: Fatigue Strength And S-N Diagram MCQs with Answers
Online Tests for Past Year Questions: Fatigue Strength And S-N Diagram
|
© EduRev
|
Education Revolution
|
Follow Us
|
