Explore Exams
Login Signup
Sign in Open App
Electronics and Communication Engineering (ECE) Exam  >  Electronics and Communication Engineering (ECE) Test  >  Sensor & Industrial Instrumentation  >  Test: Measurement of Non-Electrical Quantities - Electronics and Communication Engineering (ECE) MCQ

Measurement of Non-Electrical Quantities - Free MCQ Practice Test


MCQ Practice Test & Solutions: Test: Measurement of Non-Electrical Quantities (20 Questions)

You can prepare effectively for Electronics and Communication Engineering (ECE) Sensor & Industrial Instrumentation with this dedicated MCQ Practice Test (available with solutions) on the important topic of "Test: Measurement of Non-Electrical Quantities". These 20 questions have been designed by the experts with the latest curriculum of Electronics and Communication Engineering (ECE) 2026, to help you master the concept.

Test Highlights:

  • - Format: Multiple Choice Questions (MCQ)
  • - Duration: 25 minutes
  • - Number of Questions: 20

Sign up on EduRev for free to attempt this test and track your preparation progress.

Test: Measurement of Non-Electrical Quantities - Question 1
Save

Working of linear variable differential transducer (LVDT) is based on the principle of variable

Detailed Solution: Question 1

The working principle of the linear variable differential transformer or LVDT working theory is mutual induction. The dislocation is nonelectrical energy that is changed into electrical energy.

Test: Measurement of Non-Electrical Quantities - Question 2
Save

LVDT is an/a ___________ transducer.

Detailed Solution: Question 2

LVDT is an acronym for Linear Variable Differential Transformer. It is a common type of electromechanical transducer that can convert the rectilinear motion of an object to which it is coupled mechanically into a corresponding electrical signal.

Clear all your doubts with EduRev
Test: Measurement of Non-Electrical Quantities - Question 3
Save

Advantage of LVDT

Detailed Solution: Question 3

This is the most widely used inductive transducer for translating linear motion into an electrical signal. As we know that displacement is a vector quantity representing a change in position of a body or a point with respect to a reference. It can be linear or angular (rotational) motion. With the help of the displacement transducer, many other quantities, such as force, stress, pressure, velocity, and acceleration can be found.

Test: Measurement of Non-Electrical Quantities - Question 4
Save

Radiation pyrometers are used in the temperature range of :

Detailed Solution: Question 4

A radiation pyrometer is a non-contact temperature sensor that infers the temperature of an object by detecting its thermal radiation emitted naturally.

Test: Measurement of Non-Electrical Quantities - Question 5
Save

If the temperature of a radiating body is 1500°C, the wavelength at which the maximum radiant energy occurs:

Detailed Solution: Question 5

The wavelength at which the human body radiates maximum energy is 12 microns. Most of the radiation that the human body emits is in the infrared region. This region has a wavelength that is much more than that of the red visible light and varies between 0.75 to 1,000 microns.

Test: Measurement of Non-Electrical Quantities - Question 6
Save

A thermocouple:

Detailed Solution: Question 6

A thermocouple is an electrical device consisting of two dissimilar electrical conductors forming an electrical junction. A thermocouple produces a temperature-dependent voltage as a result of the Seebeck effect, and this voltage can be interpreted to measure temperature.

Test: Measurement of Non-Electrical Quantities - Question 7
Save

Law of intermediate metals in thermocouples allow them to:

Detailed Solution: Question 7

The law of intermediate metals states that a third metal may be inserted into a thermocouple system without affecting the emf generated, if, and only if, the junctions with the third metal are kept at the same temperature.

Test: Measurement of Non-Electrical Quantities - Question 8
Save

Piezoelectric accelerometers meters:

Detailed Solution: Question 8

A piezoelectric accelerometer is an accelerometer that employs the piezoelectric effect of certain materials to measure dynamic changes in mechanical variables (e.g., acceleration, vibration, and mechanical shock).

Test: Measurement of Non-Electrical Quantities - Question 9
Save

When accelerometers operate in the displacement mode the ratio of forcing frequency to natural frequency should be

Detailed Solution: Question 9

In reality, accelerometers have long been used to measure displacement. Eddy current probes are precisely thru-hole mounted into a mechanical casing and measure two very important shaft parameters. First, eddy current probes indicate the location of the shaft relative to the casing.

Test: Measurement of Non-Electrical Quantities - Question 10
Save

When seismic transducers are used in the acceleration made they should be designed with

Detailed Solution: Question 10

The seismic transducer is used for measuring the vibration of the ground. The spring-mass damper element and the displacement transducer are the two main components of the seismic transducer. And the displacement transducer converts the displacement into the electrical quantity.

Test: Measurement of Non-Electrical Quantities - Question 11
Save

In a drag cup type a.c tachogenerator, the output voltage is:

Detailed Solution: Question 11

The drag cup Tachogenerator generates the ripple-free output voltage. The cost of the generator is also very less.

Test: Measurement of Non-Electrical Quantities - Question 12
Save

In D.C technogenerators used for measurement of the speed of a shaft, frequent calibration has to done because

Detailed Solution: Question 12

DC Tachogenerators give you accurate DC Voltage output proportional to the speed of its mover. They are widely used in applications for feedback and display purposes.

Test: Measurement of Non-Electrical Quantities - Question 13
Save

In strain gauge torque transducers, the strain gauges should be mounted at

Detailed Solution: Question 13

Generally, four strain gauges are attached to the rotating shaft in the form of a Wheatstone bridge circuit. They are placed precisely at 45 degrees with the shaft axis with gauges 1 and 3 being diametrically opposite, as must gauge 2 and 4.

Test: Measurement of Non-Electrical Quantities - Question 14
Save

In ionization type of vacuum gauges, the pressure is P is______ Where IG = grid current, IP = plate current and IK = cathode current.

Detailed Solution: Question 14

Ionization gauges are the most sensitive gauges for very low pressures (also referred to as hard or high vacuum). They sense pressure indirectly by measuring the electrical ions produced when the gas is bombarded with electrons. Fewer ions will be produced by lower density gases.

Test: Measurement of Non-Electrical Quantities - Question 15
Save

Pirani gauge is useful for measurement of pressure

Detailed Solution: Question 15

Pirani gauges are a group of indirect measuring pressure gauges which measure the thermal conductivity of the gas sample. Pirani gauges are typically used in the fine vacuum range (1-1 torr – 10-3 torr), as this is the range where they achieve the best accuracy.

Test: Measurement of Non-Electrical Quantities - Question 16
Save

In a thermocouple pressure gauge, the temperature of heater element is a function of pressure for pressure ranges

Detailed Solution: Question 16

Thermocouple gauges are typically used to measure pressures in the range 10−4 mbar up to 1 mbar.

Test: Measurement of Non-Electrical Quantities - Question 17
Save

Strain guage rosettes are used

Detailed Solution: Question 17

Biaxial stress is a common occurrence for most structural parts, so strain gauge rosettes are routinely used for experimental stress analysis.

Test: Measurement of Non-Electrical Quantities - Question 18
Save

Hoop stresses act:

Detailed Solution: Question 18

Hoop stress is the stress that occurs along the pipe's circumference when pressure is applied. Hoop stress acts perpendicular to the axial direction.

Test: Measurement of Non-Electrical Quantities - Question 19
Save

Dummy strain gauges are used for:

Detailed Solution: Question 19

A dummy gauge is a strain gauge used in place of a fixed resistor. Temperature compensation is achieved when this dummy gauge is mounted on a piece of material similar to the specimen which undergoes the same temperature changes as does the specimen, but which is not exposed to the same strain.

Test: Measurement of Non-Electrical Quantities - Question 20
Save

The output of the Geiger Muller tube is in the form of

Detailed Solution: Question 20

The Geiger-Müller tube works on the same principle as the spark counter: an ionization between two high voltage electrodes produces a pulse of current (an avalanche of charge) between the electrodes.

22 videos|33 docs|29 tests
Join Course
Information about Test: Measurement of Non-Electrical Quantities Page
In this test you can find the Exam questions for Test: Measurement of Non-Electrical Quantities solved & explained in the simplest way possible. Besides giving Questions and answers for Test: Measurement of Non-Electrical Quantities, EduRev gives you an ample number of Online tests for practice
Download as PDF

About this Electronics and Communication Engineering (ECE) Practice Test

This test contains 20 MCQs on Measurement of Non-Electrical Quantities with detailed solutions for each question. It is part of the Sensor & Industrial Instrumentation course on EduRev, designed to align with the current Electronics and Communication Engineering (ECE) syllabus. Each solution explains not just the correct answer but also gives you an understanding of the topic — not just to attempt the question but also help you prepare for the exam with practice.

Explore more Electronics and Communication Engineering (ECE) Study Resources

If you found this Measurement of Non-Electrical Quantities MCQ Test helpful, you can further enhance your Electronics and Communication Engineering (ECE) preparation with in-depth courses on EduRev, for all the subjects and topics available in Sensor & Industrial Instrumentation course. The course offers:
  • Video Lectures: covering all the topics of Sensor & Industrial Instrumentation
  • Notes for Revision: offering revision notes, important questions, summaries, flashcards, cheatsheets & more for Electronics and Communication Engineering (ECE) preparation
  • MCQ Test: variety of questions as per the pattern of Electronics and Communication Engineering (ECE) exam
Signup to see your scores go up within 7 days!
Access 1000+ FREE Docs, Videos and Tests
Takes less than 10 seconds to signup