Registers - Free MCQ Practice Test with solutions, GATE ECE Engineering

As the name suggests serial shifting, it means that data shifting will take place one bit at a time for each clock pulse in a serial fashion. While in parallel shifting, shifting will take place with all bits simultaneously for each clock pulse in a parallel fashion.

The register capable of shifting information either to the right or to the left is termed as shift register. A register in which data can be shifted only in one direction is called unidirectional shift register, while if data can shifted in both directions, it is known as a bidirectional shift register.

The register capable of shifting in one direction is unidirectional shift register. The register capable of shifting in both directions is known as a bidirectional shift register.

The main difference between a register and a counter is that a register has no specific sequence of states except in certain specialised applications.

Register’s output depends on the past and present states of the inputs. The device which follows these properties is termed as a sequential circuit. Whereas, combinational circuits only depend on the present values of inputs.

There are two types of shifting of data are available and these are serial shifting & parallel shifting.

A register that is used to store binary information is called a binary register. A register in which data can be shifted is called shift register.

D stands for “data” in case of flip-flops and not delay. Registers are made of a group of flip-flops.

There are 4 types of shift registers, viz., Serial-In/Serial-Out, Serial-In/Parallel-Out, Parallel-In/Serial-Out and Parallel-In/Parallel-Out.

A register is defined as the group of flip-flops suitable for storing binary information. Each flip-flop is a binary cell capable of storing one bit of information. The data in a register can be transferred from one flip-flop to another.