GATE Exam  >  GATE Tests  >  Metallurgical Engineering - MT 2015 GATE Paper (Practice Test) - GATE MCQ

Metallurgical Engineering - MT 2015 GATE Paper (Practice Test) - GATE MCQ


Test Description

30 Questions MCQ Test - Metallurgical Engineering - MT 2015 GATE Paper (Practice Test)

Metallurgical Engineering - MT 2015 GATE Paper (Practice Test) for GATE 2024 is part of GATE preparation. The Metallurgical Engineering - MT 2015 GATE Paper (Practice Test) questions and answers have been prepared according to the GATE exam syllabus.The Metallurgical Engineering - MT 2015 GATE Paper (Practice Test) MCQs are made for GATE 2024 Exam. Find important definitions, questions, notes, meanings, examples, exercises, MCQs and online tests for Metallurgical Engineering - MT 2015 GATE Paper (Practice Test) below.
Solutions of Metallurgical Engineering - MT 2015 GATE Paper (Practice Test) questions in English are available as part of our course for GATE & Metallurgical Engineering - MT 2015 GATE Paper (Practice Test) solutions in Hindi for GATE course. Download more important topics, notes, lectures and mock test series for GATE Exam by signing up for free. Attempt Metallurgical Engineering - MT 2015 GATE Paper (Practice Test) | 65 questions in 180 minutes | Mock test for GATE preparation | Free important questions MCQ to study for GATE Exam | Download free PDF with solutions
Metallurgical Engineering - MT 2015 GATE Paper (Practice Test) - Question 1

Q.1-5 Carry one Mark each.

Choose the appropriate word/pharse, out of the four options given below, to complete the following sentence:

Apparent lifelessness _______________ dormant life.

Metallurgical Engineering - MT 2015 GATE Paper (Practice Test) - Question 2

Fill in the blank with the correct idiom/pharse.

That boy from the town was a ________________ in the sleepy village.

1 Crore+ students have signed up on EduRev. Have you? Download the App
Metallurgical Engineering - MT 2015 GATE Paper (Practice Test) - Question 3

Choose the statement where underlined word is used correctly.

Metallurgical Engineering - MT 2015 GATE Paper (Practice Test) - Question 4

Tanya  is older than Eric.

Cliff is older than Tanya.

Eric is older than Cliff.

if the first two statements are true, then the third statement is :

Metallurgical Engineering - MT 2015 GATE Paper (Practice Test) - Question 5

Five teams have to complete in a league, with every team playing every other team exactly once, before going to the next round. How many matches will have to be held to complete the league round of matches?

Metallurgical Engineering - MT 2015 GATE Paper (Practice Test) - Question 6

Q.6-10 Carry two Mark each

Select the appropriate option in place of underlined part of the sentence.

"Increased productivity necessary" reflects greater efforts made by the employees.

Metallurgical Engineering - MT 2015 GATE Paper (Practice Test) - Question 7

Given below are two statements followed by two conclusions. Assuming these statements to be true, decide  which one logically follows.

Statements:

I. No manager is a leader.

II. All leaders are executives.

Conclusions:

I.No manager is a leader.

II. No executive is a manager.

*Answer can only contain numeric values
Metallurgical Engineering - MT 2015 GATE Paper (Practice Test) - Question 8

In the given figure angle Q is a right angles, PS:QS= 3:1, RT:QT = 5:2 and PU:UR = 1:1. If area of triangle QTS is 20 cm2, then the area of triangle PQR in cmis____________.


Metallurgical Engineering - MT 2015 GATE Paper (Practice Test) - Question 9

Right triangle PQR is to be constructed in the xy- plane so that the right angle is at P and line PR is parallel to the x- axis. The x and y coordinates of P,Q and R are to be integers that satisfy the inequalities; -4< x< 5 and 6< y< 16. How many different triangles could be constructed with these properties?

Metallurgical Engineering - MT 2015 GATE Paper (Practice Test) - Question 10

A coin is tossed thrice. Let X be the event that head occurs in each of the first two tosses. Let Y be the event that a tail occurs on the thrid toss. Let Z be the event that two tails occur in the three tosses. Based on the above information, which one of the following statements is True?

*Answer can only contain numeric values
Metallurgical Engineering - MT 2015 GATE Paper (Practice Test) - Question 11

Q. 11 – Q. 35 carry ONE mark each

Consider the following five readings from an experiment: 19, 17, 15, 13, 11. The standard deviation of the readings is________.


Metallurgical Engineering - MT 2015 GATE Paper (Practice Test) - Question 12

 is a numerical approximation for

Metallurgical Engineering - MT 2015 GATE Paper (Practice Test) - Question 13

If A and B are matrices, (A)T =

Metallurgical Engineering - MT 2015 GATE Paper (Practice Test) - Question 14

Which of the following properties is intensive?

Metallurgical Engineering - MT 2015 GATE Paper (Practice Test) - Question 15

In an Ellingham diagram, the standard free energy change ΔG° for the oxidation reaction of a metal M given by: xM(s) + O2(g)→ MxO2(s) , is plotted as a function of temperature. The slope of this line is positive because

Metallurgical Engineering - MT 2015 GATE Paper (Practice Test) - Question 16

In froth flotation, hydrophobic mineral particles ascend with air bubbles preferentially over hydrophilic mineral particles. The figure below shows a schematic of a water droplet placed on the surfaces of two mineral P and Q.

Given this information, pick the CORRECT statement from the following:

Metallurgical Engineering - MT 2015 GATE Paper (Practice Test) - Question 17

Which of the following oxide addition results in polymerization (i.e., network formation) in a silicate slag?

Metallurgical Engineering - MT 2015 GATE Paper (Practice Test) - Question 18

Zn is commercially extracted from which of the following minerals?

Metallurgical Engineering - MT 2015 GATE Paper (Practice Test) - Question 19

Self supporting arches for furnace roofs can be fabricated using silica bricks but not using magnesia bricks. Why?

Metallurgical Engineering - MT 2015 GATE Paper (Practice Test) - Question 20

A species can diffuse through the lattice (diffusion coefficient, DL ), along grain boundaries (diffusion coefficient, DGB ), and along free surfaces (diffusion coefficient, DS ). Which of the following relations is CORRECT?

Metallurgical Engineering - MT 2015 GATE Paper (Practice Test) - Question 21

Select the CORRECT plot of Gibbs free energy (G) vs. temperature (T) for a single component system from the following:

Metallurgical Engineering - MT 2015 GATE Paper (Practice Test) - Question 22

If Δx represents adherent oxide layer thickness and t is time, which of the following curves represents diffusion-controlled oxidation kinetics?

Metallurgical Engineering - MT 2015 GATE Paper (Practice Test) - Question 23

Based on the standard galvanic series, select the CORRECT sequence of metals in the increasing order of anodic behaviour:

Metallurgical Engineering - MT 2015 GATE Paper (Practice Test) - Question 24

In a conventional unit cell of a crystal, a = b ≠ c and α= β = γ=90°. This crystal belongs to which of the following systems?

Metallurgical Engineering - MT 2015 GATE Paper (Practice Test) - Question 25

In an X-Ray powder pattern of a simple cubic crystal, the 2nd peak corresponds to

Metallurgical Engineering - MT 2015 GATE Paper (Practice Test) - Question 26

When boron (trivalent) is doped to silicon, the resulting material is

Metallurgical Engineering - MT 2015 GATE Paper (Practice Test) - Question 27

Which of the following metal working operations can be categorized as an indirect compression process?

Metallurgical Engineering - MT 2015 GATE Paper (Practice Test) - Question 28

Which of the following is a typical rolling defect?

Metallurgical Engineering - MT 2015 GATE Paper (Practice Test) - Question 29

Which of the following manufacturing processes is NOT used for producing fine grained metals?

Metallurgical Engineering - MT 2015 GATE Paper (Practice Test) - Question 30

Which of the following metal forming techniques is used to produce soft drink cans from aluminium sheets?

View more questions
Information about Metallurgical Engineering - MT 2015 GATE Paper (Practice Test) Page
In this test you can find the Exam questions for Metallurgical Engineering - MT 2015 GATE Paper (Practice Test) solved & explained in the simplest way possible. Besides giving Questions and answers for Metallurgical Engineering - MT 2015 GATE Paper (Practice Test), EduRev gives you an ample number of Online tests for practice
Download as PDF