Consider the following statement S1 and S2.
S1: The β of a bipolar transistor reduces if thebase width is increased.
S2: The β of bipolar transistor increases if the doping concentration in the base is increased. Which one of the following is correct ?
1 Crore+ students have signed up on EduRev. Have you? Download the App |
The collector and emitter currents levels for atransistor with common base dc current gain of 0.99 and base current of 20μA are respectively.
The CE amplifier circuit are preferred over CB amplifier circuit because they have
μF & μI denotes the forward and Inverted mode current gains of a BJT, which one of the following is correct ?
The phenomenon known as "Early effect" in abipolar transistor refers to a reduction of theeffective base-width caused by
The breakdown voltage of a transistor with its base open is BVCBOthen
For a BJT, the common base current gain a =0.98 and the collector base junction reverse biassaturation current ICO = 0.6mA. This BJT isconnected in the common emitter mode andoperated in the active region with a base drivecurrent IB = 20mA. The collector current IC forthis mode of operation is
The action of a JFET in its equivalent circuit canbest be represented as a
In a biased JFET, the shape of the channel is as shown in the given figure because
Consider the following statements:
FETs when compared to BJTs have
1. High input resistance
2. Current follow due to majority carries
3. Low input impedance
4. Current flow due to minority carries
Q.
Which of the statements given above correct?
Compared to the bipolar junction transistor, a JFET;
1. Has a larger gain bandwidth production
2. Is less noisy
3. Has less input resistance
4. Has current flow due to only majority carriers
The drain - source voltage at which drain currentbecomes nearly constant is called
The pinch off voltage VP = – 6V for P – channel JFET. If VGS = + 2V, what is the value of VDS at which it will enter into saturation region ?
An n = channel JFET has IDSS = 2mA, Vp = – 4V; Its transconductance gm (in mA/V) for an applied gate to source voltage VGS of – 2V is
An N- channel JFET, having a pinch – off voltage (Vp) of – 5V shows a transconductance (gm) of 1mA/V. When the applied gate to source voltage (VGS) is – 1V. Its maximum transconductance(in mA/V) is
The data sheet for a certain JFET (Junction Field Effect Transistor) indicates that IDSS (drain to source current with gate shorted) = 15 mA and VGS (off) (Cut – off value of gate to source voltage) = – 5V.
When transistors are used in digital circuits they usually operate in the:
The input/output relationship of the common-collector and common-base amplifiers is: