Electrical Engineering (EE) Exam  >  Electrical Engineering (EE) Tests  >  Test: Power Systems - 4 - Electrical Engineering (EE) MCQ

Test: Power Systems - 4 - Electrical Engineering (EE) MCQ


Test Description

25 Questions MCQ Test - Test: Power Systems - 4

Test: Power Systems - 4 for Electrical Engineering (EE) 2024 is part of Electrical Engineering (EE) preparation. The Test: Power Systems - 4 questions and answers have been prepared according to the Electrical Engineering (EE) exam syllabus.The Test: Power Systems - 4 MCQs are made for Electrical Engineering (EE) 2024 Exam. Find important definitions, questions, notes, meanings, examples, exercises, MCQs and online tests for Test: Power Systems - 4 below.
Solutions of Test: Power Systems - 4 questions in English are available as part of our course for Electrical Engineering (EE) & Test: Power Systems - 4 solutions in Hindi for Electrical Engineering (EE) course. Download more important topics, notes, lectures and mock test series for Electrical Engineering (EE) Exam by signing up for free. Attempt Test: Power Systems - 4 | 25 questions in 50 minutes | Mock test for Electrical Engineering (EE) preparation | Free important questions MCQ to study for Electrical Engineering (EE) Exam | Download free PDF with solutions
Test: Power Systems - 4 - Question 1

A distribution transformer is normally a transformer with primary and secondary winding sconnected in

Test: Power Systems - 4 - Question 2

High tension cables can be used for transmission of voltage upto

1 Crore+ students have signed up on EduRev. Have you? Download the App
Test: Power Systems - 4 - Question 3

With the increase in transmission voltage, the volume of the conductor will

Test: Power Systems - 4 - Question 4

Alternator are rated in

Test: Power Systems - 4 - Question 5

A thermal plant has an efficiency of about

Test: Power Systems - 4 - Question 6

High voltage transmission is recommended because it

Test: Power Systems - 4 - Question 7

To detect inter-phase fault of three phase line, the number of relays needed will be

Test: Power Systems - 4 - Question 8

The sag in a transmission line conductors depends upon
 

Test: Power Systems - 4 - Question 9

Surge impedance of a transmission line is given by

Test: Power Systems - 4 - Question 10

The purpose of a circuit breaker is to

Test: Power Systems - 4 - Question 11

The permissible variation in supply frequency is

Detailed Solution for Test: Power Systems - 4 - Question 11

According to
CENTRAL ELECTRICITY REGULATORY COMMISSION OF INDIA

Ideal Range of frequency variation

f = 50 ± 1%

49.5 to 50.5 Hz

Practical permissible Range of frequency variation

f = 50 ± 3%

48.5 to 51.5 Hz

The grid frequency should be maintained at 48.6 Hz. and above at all times.

Test: Power Systems - 4 - Question 12

Series reactors are used to :

Test: Power Systems - 4 - Question 13

When a line-to-ground fault occurs, the current in the faulted phase is 100 A. The zero-sequence current in this case will be :

Test: Power Systems - 4 - Question 14

The zero-sequence current of a generator for line-to ground fault is j2.4 pu. Then the current through the neutral during the fault is

Test: Power Systems - 4 - Question 15

SF6 gas is transported in

Test: Power Systems - 4 - Question 16

The minimum oil circuit breaker has less volume of oil because

Test: Power Systems - 4 - Question 17

For rural electrification in a country like India with complex network, the circuit breaker preferred is ....... one.

Test: Power Systems - 4 - Question 18

In a 220 kV system, the inductance and capacitance up the circuit breaker location are 25 mH and 0.025mF respectively. The value of resistor required to be connected across the  breaker contacts which will give no transient oscillations, is

Detailed Solution for Test: Power Systems - 4 - Question 18

The value of resistor required to be connected across the breaker contacts which will give no transient oscillations R is
R = 0.5* √(L/C)
R = 0.5 * √(25*10-3/(0.025*10-6))
R = 500 Ω

Test: Power Systems - 4 - Question 19

Routine tests are conducted on

Test: Power Systems - 4 - Question 20

Current rating is not necessary in case of

Test: Power Systems - 4 - Question 21

Which of the following sequence of operation is correct for operation of circuit breaker, isolator and earthing switch while opening a circuit ?

Test: Power Systems - 4 - Question 22

Plug setting of an electromagnetic relay can be altered by varying

Test: Power Systems - 4 - Question 23

The most efficient torque– producing actuating structure for induction-type relays is

Test: Power Systems - 4 - Question 24

Buchholz relay to

Test: Power Systems - 4 - Question 25

The Buchholz protects a transformer from

Information about Test: Power Systems - 4 Page
In this test you can find the Exam questions for Test: Power Systems - 4 solved & explained in the simplest way possible. Besides giving Questions and answers for Test: Power Systems - 4, EduRev gives you an ample number of Online tests for practice

Top Courses for Electrical Engineering (EE)

Download as PDF

Top Courses for Electrical Engineering (EE)