GATE  >  Practice Test: Gate Civil Engineering(CE) 2017 Paper

# Practice Test: Gate Civil Engineering(CE) 2017 Paper - GATE

Test Description

## 65 Questions MCQ Test - Practice Test: Gate Civil Engineering(CE) 2017 Paper

Practice Test: Gate Civil Engineering(CE) 2017 Paper for GATE 2023 is part of GATE preparation. The Practice Test: Gate Civil Engineering(CE) 2017 Paper questions and answers have been prepared according to the GATE exam syllabus.The Practice Test: Gate Civil Engineering(CE) 2017 Paper MCQs are made for GATE 2023 Exam. Find important definitions, questions, notes, meanings, examples, exercises, MCQs and online tests for Practice Test: Gate Civil Engineering(CE) 2017 Paper below.
Solutions of Practice Test: Gate Civil Engineering(CE) 2017 Paper questions in English are available as part of our course for GATE & Practice Test: Gate Civil Engineering(CE) 2017 Paper solutions in Hindi for GATE course. Download more important topics, notes, lectures and mock test series for GATE Exam by signing up for free. Attempt Practice Test: Gate Civil Engineering(CE) 2017 Paper | 65 questions in 180 minutes | Mock test for GATE preparation | Free important questions MCQ to study for GATE Exam | Download free PDF with solutions
 1 Crore+ students have signed up on EduRev. Have you?
Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 1

### Consider the following sentences:  All benches are beds. No bed is a bulb. Some bulbs are lamps.  Which of the following can be inferred?   i. Some beds are lamps. ii. Some lamps are beds.

Detailed Solution for Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 1

(D)

Since there is no direct relation given between lamps and beds. So, neither will be correct

Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 2

### The following sequence of numbers is arranged in increasing order: 1, x, x, x, y, y, 9,16,18. Given that the mean and median are equal, and are also equal to twice the mode, the value of y is

Detailed Solution for Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 2

(D)
Exp:  Given, Mean = Median = 2Mode

⇒ Mean = Median = 2x

∴ y = 2x→ (4) [∵Median = 2 Mode]
From (2);11x = 44 x = 4; ∴ y = 8

Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 3

### The bacteria in milk are destroyed when it _________ heated to 80 degree Celsius.

Detailed Solution for Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 3

Since “are” is used in the statement and the statement is talking general information, therefore, present tense will be used.
Thus, the statement will be- The bacteria in milk are destroyed when it is heated to 80 degree Celsius.

Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 4

If the radius of a right circular cone is increased by 50%, its volume increases by

Detailed Solution for Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 4

(C)

Exp : Given, radius of a right circular cone is increased by 50%.
Let, height of the circular cone = (h)  Initially, Volume of the cone(V) =(1/3)πR2h  .......(1)

New volume of the cone(V') =  =(1/3)πr2(1.5R)2h  .......(2)

From (1) and (2);= 2.25v

Hence increases by 125% as
100 = 125%

Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 5

__________  with someone else’s email account is now very serious offence.

Detailed Solution for Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 5

Involving means getting indulged in a work.
Assisting means helping others to do a work.
Tampering means interfering with (something) in order to cause damage or make unauthorized alterations.
Incubating means developing an infectious disease before symptoms appear.
Thus, here tampering is most suitable word.

Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 6

The last digit of (2171)7 + (2172)9 + (2173)11 + (2174)13 is

Detailed Solution for Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 6

The last digit of (2171)7 = 1
The last digit of (2172)9 = (2172)8(2172)

Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 7

Two machines M1 and M2 are able to execute any of four jobs P, Q, R and S. The machines can perform one job on one object at a time. Jobs P, Q, R and S take 30 minutes, 20 minutes, 60 minutes and 15 minutes each respectively. There are 10 objects each requiring exactly 1 job. Job P is to be performed on 2 objects. Job Q on 3 objects. Job R on 1 object and Job S on 4 objects. What is the minimum time needed to complete all the jobs?

Detailed Solution for Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 7

Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 8

Students applying for hostel rooms are allotted rooms in order of seniority. Students already staying in a room will move if they get a room in their preferred list. Preferences of lower ranked applicants are ignored during allocation.
Given the data below, which room will Ajit stay in?

Detailed Solution for Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 8

(B)

As per their preferences given

Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 9

The bar graph below shows the output of five carpenters over one month, each of whom made  different items of furniture: Chairs, tables, and beds.

Consider the following statements.
i. The number of beds made by carpenter C2 is exactly the same as the same as the number   of tables made by carpenter C3.
​ ii. The total number of chairs made by all carpenters is less than the total number of tables.   Which one of the following is true?

Detailed Solution for Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 9

(C) Exp:

(i) The number of beds made by carpenter C2 is exactly the same as the number of tables made by carpenter C3
i.e., beds made by carpenter
C2 = 8 = tables made by carpenter C3
[∵ From the bar graph ]
So,(i) is correct.  (ii) Total Number of tables made by all carpenters=31.
Total Number of chairs made by all carpenters=23

∴23 < 31
∵ (ii) is correct

Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 10

The old concert hall was demolished because of fears that the foundation would be affected by the construction tried to mitigate the impact of pressurized air pockets created by the excavation of large amounts of soil. But even with these safeguards, it was feared that the soil below the concert hall would not be stable.

From this, one can infer that

Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 11

The ordinates of a 2 – h unit hydrograph at 1 hour intervals starting from time t = 0, are 0, 3, 8, 6, 3, 2 and 0 m3/s. Use trapezoidal rule for numerical integration, if required.

What is the catchment area represented by the unit hydrograph?

Detailed Solution for Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 11

Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 12

A uniformly distributed line load of 500 kN/m is acting on the ground surface. Based on Boussinesq’s theory, the ratio of vertical stress at a depth 2 m to that at 4 m, right below the line of loading, is

Detailed Solution for Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 12

(C)
Exp: Due to UDL
Vertical stress  =

at x 0; veritcal stress

Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 13

According to IS 456-2000, which one of the following statements about the depth of neutral axis χu,bal for a balanced reinforced concrete section is correct?

Detailed Solution for Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 13

(B) Exp: By limit state method

For balanced section

∴ χu ,bal depends upon grade of steel only.

Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 14

Group I lists the type of gain or loss of strength in soils.
Group II lists the property or process responsible for the loss or gain of strength in soils.
Group I                                                                  Group II
P. Regain of strength with time                           1. Boiling
Q. Loss of strength due to cyclic loading            2. Liquefaction
R. Loss of strength due to upward seepage       3. Thixotropy
S. Loss of strength due to remolding                  4. Sensitivity

The correct match between Group I and Group II is

Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 15

A runway is being constructed in a new airport as per the International Civil Aviation Organization (ICAO) recommendations. The elevation and the airport reference temperature of this airport are 535 m above the mean sea level and 22.65°C, respectively. Consider the effective gradient of runway as 1%. The length of runway required for a design-aircraft under the standard conditions is 2000 m. Within the framework of applying sequential corrections as per the ICAO recommendations, the length of runway corrected for the temperature is

Detailed Solution for Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 15

Correction for elevation : 7 % increase per 300 m height

∴ Corrected length = 2000 + 249.7 = 2249.7 m
Correction for temperature :
std. Atm temp 15 - 0.0065 *535 + 11.52°C
ΔT = 22.65 -11.52 = 11.13°C

∴ Corrected length 2249.74 250.32
= 2500.02m

Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 16

A soil sample is subjected to a hydrostatic pressure, σ. The Mohr circle for any point in the soil sample would be

Detailed Solution for Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 16

σx = σy = σz = σ,
For Mohr’s Circle

Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 17

The figure shows a two-hinged parabolic arch of span load of intensity q per unit length.

The maximum bending moment in the arch is equal to

Detailed Solution for Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 17

Bending moment at any point for two-hinged parabolic arch with uniformly distributed load is zero.

Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 18

For a steady incompressible laminar flow between two infinite parallel stationary plates, the shear stress variation is

Detailed Solution for Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 18

We know that velocity variation,

Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 19

Two machines M1 and M2 are able to execute any of four jobs P, Q, R and S. The machines can perform one job on one object at a time. Jobs P, Q, R and S take 30 minutes, 20 minutes, 60 minutes and 15 minutes each respectively. There are 10 objects each requiring exactly 1 job. Job P is to be performed on 2 objects. Job Q on 3 objects. Job R on 1 object and Job S on 4 objects. What is the minimum time needed to complete all the jobs?

Detailed Solution for Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 19

Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 20

The number of parameters in the univariate exponential and Gaussian distributions, respectively, are

Detailed Solution for Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 20

Probability density functions of univariable exponential distributes

For Gaussian distribution
where µ and σ are parameters

Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 21

The wastewater form a city, containing a high concentration of biodegradable organics, is being steadily discharged into a flowing river at a location S. If the rate of aeration of the river water is lower than the rate of degradation of the organics, then the dissolved oxygen of the river water

Detailed Solution for Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 21

Since, currently the rate of aeration is less than the rate of degradation of the organics. Therefore, at downstream the oxygen level will continue to deplete until the rate of aeration = rate of degradation of organics.

Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 22

The reaction rate involving reactants A and B is given by −k [A]α [B]β. Which one of the following statements is valid for the reaction to be first –order reaction?

Detailed Solution for Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 22

In chemical kinetics, the order of reaction with respect to given substance is defined as the index or exponent  to which its concentration term in the rate equation is raised.
r = k.[A]α [B]β

Order of reaction = α + β
For first order reaction, α + β = 1

Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 23

A strip footing is resting on the ground surface of a pure clay bed having an undrained cohesion Cu. The ultimate bearing capacity of the footing is equal to

Detailed Solution for Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 23

Ultimate bearing capacity = c.Nc
For pure clay Nc = 5.14 = (π + 2)
UBC = (π + 2) C

Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 24

A simply supported beam is subjected to a uniformly distributed load. Which one of the following statements is true?

Detailed Solution for Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 24

Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 25

A triangular pipe network is shown in the figure.

The head loss in each pipe is given by hf = rQ1.8, with the variables expressed in a consistent set of units. The value of r for the pipe AB is 1 and for the pipe BC is 2. If the discharge supplied at the point A (i.e., 100) is equally divided between the pipes AB and AC, the value of r (up to two decimal places) for the pipe AC should be_______.

Detailed Solution for Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 25

If the discharge supplied at point A is equally divided so QAB = QAC = 50m3/s

*Answer can only contain numeric values
Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 26

Detailed Solution for Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 26

Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 27

A super-elevation e is provided on a circular horizontal curve such that a vehicle can be stopped on the curve without sliding. Assuming a design speed v and maximum coefficient of side friction fmax, which one of the following criteria should be satisfied?

Detailed Solution for Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 27

θ = tan θ = e
For no sliding

For stopped vehicle v = 0
f ≥ −e

Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 28

Which one of the following is NOT present in the acid rain?

Detailed Solution for Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 28

Acid rain is caused due to a mixture of gases like sulphur, nitrogen dioxide and carbon dioxide with water. Thus, Nitric acid, sulphuric acid and carbonic acid are formed.
However, acetic acid is not present in the acid rain.

Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 29

The accuracy of an Electronic Distance Measuring Instrument (EDMI) is specified as  ± (a mm + b ppm). Which one of the following statements is correct?

Detailed Solution for Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 29

Accuracy of EDMI is generally stated in terms of constant instrument error and measuring error proportional to distance being measured.
± (a mm + b ppm)
The first part in this expression indicates a constant instrument error that is independent of length of line measured. Second component is distance related error.

*Answer can only contain numeric values
Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 30

Consider the following partial differential equation:

Detailed Solution for Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 30

By comparing with general form

Condition for parabolic is
B2 - 4AC = 0

Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 31

The matrix P is the inverse of a matrix Q. If I denotes the identity matrix, which one of the following options is correct ?

Detailed Solution for Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 31

Given P is inverse of Q
⇒ PQ = QP = I

*Answer can only contain numeric values
Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 32

Vehicles arriving at an intersection from one of the approach road follow the Poisson distribution. The mean rate of arrival is 900 vehicles per hour. If a gap is defined as the time difference between two successive vehicle arrivals (with vehicles assumed to be points), the probability (up to four decimal places) that the gap is greater than 8 seconds is _____

Detailed Solution for Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 32

By Poission’s distribution

Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 33

Let x be a continuous variable defined over the interval
The integral

Detailed Solution for Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 33

Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 34

The number of spectral bands in the Enhanced Thematic satellite Landsat-7 is

*Answer can only contain numeric values
Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 35

A 3 m thick clay layer is subjected to an initial uniform pore pressure of 145 kPa as shown in the figure.

For the given ground conditions, the time (in days, rounded to the nearest integer) required for 90% consolidation would be ________

Detailed Solution for Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 35

It is single drainage

Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 36

A planar truss tower structure is shown in the figure.

Consider the following statements about the external and internal determinacies of the truss.

(P) Externally Determinate
(Q) External Static Indeterminacy = 1
(R) External Static Indeterminacy = 2
(S) Internally Determinate
(T) Internal Static Indeterminacy = 1
(U) Internal Static Indeterminacy = 2

Which one of the following options is correct?

Detailed Solution for Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 36

Dse = r - 3
r = number if sup port reactions = 4
Dse  = 4 - 3 = 1
Dsi = number of double diagonals 2

*Answer can only contain numeric values
Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 37

Consider the stepped bar made with a linear elastic material and subjected to an axial load of 1 kN, as shown in the figure.

Segments 1 and 2 have cross-sectional are of 100 mm2 and 60 mm2, Young’s modulus of 2 × 105 MPa and 3 × 105 MPa, and length of 400 mm and 900 mm, respectively. The strain energy (in N-mm, up to one decimal place) in the bar due to the axial load is_____

Detailed Solution for Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 37

*Answer can only contain numeric values
Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 38

Consider the beam ABCD shown in the figure.

For a moving concentrated load of 50 kN on the beam, the magnitude of the maximum bending moment (in kN-m) obtained at the support C will be equal to______

Detailed Solution for Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 38

By muller Breslau principle
ILD for moment at C
x - 0 = 4
x = 4
Load is acting at point B
B.M = 50 × 4 = 200kN − m

*Answer can only contain numeric values
Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 39

A column is subjected to a load through a bracket as shown in the figure.

The resultant force (in kN, up to one decimal place) in the bolt 1 is_____

Detailed Solution for Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 39

P = 10KN, e = 15cm, r1 = r2 = r3 = r4 = 5 cm

Force in bolt 1 due to moment

*Answer can only contain numeric values
Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 40

What is the yield strength of bolt of class 4.6?

Detailed Solution for Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 40

For class 4.6, ultimate strength = 4 × 100 = 400 N/mm2
yield strength / ultimate strength = 0.6
yield strength = 0.6 × 400 = 240 N/mm2

*Answer can only contain numeric values
Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 41

The value of M in the beam ABC shown in the figure is such that the joint B does not rotate.

The value of support reaction (in kN) at B should be equal to______

Detailed Solution for Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 41

*Answer can only contain numeric values
Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 42

Two wastewater streams A and B, having an identical ultimate BOD are getting mixed to form the stream C. The temperature of the stream A is 20°C and the temperature of the stream C is 10°C. It is given that

• The 5-day BOD of the stream A measured at 20°C=50 mg/l
• BOD rate constant (base 10) at 20°C=0.115 per day
• Temperature coefficient = 1.135

The 5 –day BOD (in mg/l, up to one decimal place) of the stream C, calculated at 10°C, is______

Detailed Solution for Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 42

*Answer can only contain numeric values
Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 43

A particle of mass 2 kg is travelling at a velocity of 1.5 m/s. A force f(t) = 3t2 (in N) is applied to it in the direction of motion for a duration of 2 seconds, where t denotes time in seconds. The velocity (in m/s, up to one decimal place) of the particle immediately after the removal of the force is________

Detailed Solution for Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 43

f (t) = 3t2
m.Q = 3t2

Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 44

The queue length (in number of vehicles) versus time (in seconds) plot for an approach to a signalized intersection with the cycle length of 96 seconds is shown in the figure scale).

At time t = 0, the light has just turned red. The effective green time is 36 seconds, during which vehicles discharge at the saturation flow rate, vph). Vehicles arrive at a uniform rate, v (in vph), throughout the cycle. Which one of the following statements is TRUE?

Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 45

For the function  to be a valid probability density function, which one of the following statements is correct?

Detailed Solution for Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 45

f (x) = a + bx 0 ≤ x ≤ 1 is a valid probability density function

a = 0.5, b = 1 satisfies the above relation

*Answer can only contain numeric values
Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 46

The infinite sand slope shown in the figure is on the verge of sliding failure. The ground water table coincides with the ground surface. Unit weight of water γw = 9.81kN m3 .

The value of the effective angle of internal friction (in degrees, up to one decimal place) of the sand is

Detailed Solution for Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 46

*Answer can only contain numeric values
Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 47

A sluice gate used to control the flow in a horizontal channel of unit width is shown in figure.

It is observed that the depth of flow is 1.0 m upstream of the gate, while the depth is 0.2 m downstream of the gate. Assuming a smooth flow transition across the sluice gate, i.e., without any energy loss, and the acceleration due to gravity as  10 m/s2, the discharge (in m3/s, up to two decimal places) passing under the sluice gate is_______

Detailed Solution for Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 47

Given Energy loss is zero ⇒  = E1 = E2

Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 48

Group I contains three broad classes of irrigation supply canal outlets. Group II presents hydraulic performance attributes.

The correct match of the items in Group I with the items in Group II is

Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 49

Consider the matrix  Which one of the following statements is TRUE for the
eigenvalues and eigenvectors of this matrix?

Detailed Solution for Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 49

Let A =
Characteristic equations is λ2 − 6λ + 9 = 0 ⇒ λ = 3, 3
Eigen value 3 has multiplicity 2. Eigen vectors corresponding to λ = 3 is (A − 3I) X = 0

e(A) = 1
Number of linearly independent eigen vectors corresponding to eigen value λ = 3 is  n - r = 2 - 1 = 1   where n = no. of unknowns, r= rank of (A − λI)
∴ One linearly independent eigen vector exists corresponding to λ = 3

Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 50

The laboratory test on a soil sample yields the following results: natural moisture content = 18%, liquid limit = 60%, plastic limit = 25%, percentage of clay sized fraction = 25%. The liquidity index and activity (as per the expression proposed by skempton) of the soil, respectively, are

Detailed Solution for Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 50

Liquidity Index (IL) = 1 − IC

Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 51

The solution of the equation  with Q = 0 at t = 0 is

Detailed Solution for Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 51

Comparing with first order linear differential equations

*Answer can only contain numeric values
Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 52

Water flows through a 90° bend in a horizontal plane as depicted in the figure.

A pressure of 140 kPa is measured at section 1-1. The inlet diameter marked at section 1-1 is cm, while the nozzle diameter marked at section 2-2 iscm. Assume the following:

(i) Acceleration due to gravity = 10 m/s2.
(ii) Weights of both the bent pipe segment as well as water are negligible.
(iii) Friction across the bend is negligible.

The magnitude of the force (in kN, up to two decimal places) that would be required to hold the pipe section is______

*Answer can only contain numeric values
Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 53

A pre-tensioned rectangular concrete beam 150 mm wide and 300 mm depth is prestressed with three straight tendons, each having a cross-sectional area of 50 mm2, to an initial stress of 1200 N/mm2. The tendons are located at 100 mm from the soffit of the beam. If the modular ratio is 6, the loss of prestressing force (in kN, up to one decimal place) due to the elastic deformation of concrete only is ______.

Detailed Solution for Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 53

Stress = 1200 N / mm2

Loss due to elastic deformation = m.f c = 6 × 5.33 = 31.98
Prestress force = 31.98 × 3 × 50 = 4797 N = 4.8 KN

*Answer can only contain numeric values
Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 54

The spherical grit particles, having a radius of 0.01mm and specific gravity of 3.0, need to be separated in a settling chamber. It is given that

• g = 9.81 m/s2
• the density of the liquid in the settling chamber = 1000 kg/m3
• the kinematic viscosity of the liquid in the settling chamber = 10-6 m2/s

Assuming laminar conditions, the settling velocity (in mm/s, up to one decimal place) is_____

Detailed Solution for Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 54

Kinematic  viscocity = 10−6 m2 / s

*Answer can only contain numeric values
Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 55

The equivalent sound power level (in dB) of the four sources with the noise levels of 60 dB, 69 dB, 70 dB and 79 dB is_______

Detailed Solution for Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 55

Equivalent sound power level

*Answer can only contain numeric values
Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 56

Consider the equation  This is numerically solved by using the forward Euler method with a step size. ∆t = 2. The absolute error in the solution at the end of the first time step is_________

Detailed Solution for Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 56

Approximation value by Euler's Method

Exact value:

u = t3 + t
u (2) = 8 + 2 = 10
∴ absolute error = |10 − 2| = 8

*Answer can only contain numeric values
Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 57

It is proposed to drive H-piles up to a depth of 7 m at a construction site. The average surface area of the H-pile is 3 m2 per meter length. The soil at the site is homogeneous sand, having an effective friction angle of 32°. The ground water table (GWT) is at a depth of 2 m below the ground surface. The unit weights of the soil above and below the GWT are 16 kN/m3 and 19 kN/m3, respectively. Assume the earth pressure coefficient, K= 1.0, and the angle of wall friction, δ = 23°. The total axial frictional resistance (in kN, up to one decimal place) mobilized on the pile against the driving is________

Detailed Solution for Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 57

BC:
Effective stress variation

Total axial frictional resistance = 350+40.75 = 390.75KN

*Answer can only contain numeric values
Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 58

The wastewater having an organic concentration of 54 mg/l is flowing at a steady rate of 0.8m3/day through a detention tank of dimensions 2m × 4m × 2m. If the contents of the tank are well mixed and the decay constant is 0.1 per day, the outlet concentration (in mg/l, up to  one decimal place) is ______

Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 59

The radius of a horizontal circular curve on a highway is 120 m. The design speed is 60 km/hour, and the design coefficient of lateral friction between the tyre and the road surface is 0.15. The estimated value of superelevation required (if full lateral friction is assumed to develop), and the value of coefficient of friction needed (if no superelevation is provided) will, respectively, be

Detailed Solution for Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 59

*Answer can only contain numeric values
Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 60

Consider two axially loaded columns, namely, 1 and 2, made of a linear elastic material with Young’s modulus 2 × 105 MPa, square cross-section with side 10 mm, and length 1 m. For Column 1, one end is fixed and the other end is free. For Column 2, one end is fixed and the other end is pinned. Based on the Euler’s theory, the ratio (up to one decimal place) of the buckling load of Column 2 to the buckling load of Column 1 is ________

Detailed Solution for Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 60

For column -1; One end is fixed and other is free

One end is fixed and other is pinned.

Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 61

The observed bearings of a traverse are given below:

The stations(s) most likely to be affected by the local attraction is/are

Detailed Solution for Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 61

So, local attraction at only R

Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 62

A 1 m wide rectangular channel has a bed slope of 0.0016 and the Manning’s roughness coefficient is 0.04. Uniform flow takes place in the channel at a flow depth of 0.5 m. At a particular section, gradually varied flow (GVF) is observed and the flow depth is measured as 0.6 m. The GVF profile at that section is classified as

Detailed Solution for Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 62

yn = 0.5m

*Answer can only contain numeric values
Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 63

A consolidated undrained (CU) triaxial compression test is conducted on a normally consolidated clay at a confining pressure of 100 kPa. The deviator stress at failure is 80 kPa, and the pore-water pressure measured at failure is 50 kPa. The effective angle of internal friction (in degrees, up to one decimal place) of the soil is_________

Detailed Solution for Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 63

For normally consolidated clay c = 0

*Answer can only contain numeric values
Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 64

An effective rainfall of 2-hour duration produced a flood hydrograph peak of 200 m3/s. The flood hydrograph has a base flow of 20 m3/s. If the spatial average rainfall in the watershed for the duration of storm is 2 cm and the average loss rate is 0.4 cm/hour, the peak of 2-hour unit hydrograph (in m3/s-cm, up to one decimal place) is_________

Detailed Solution for Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 64

Food hydrograph peak = 200 m3/s
Base flow 20 m3/s

Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 65

The following observations are made while testing aggregate for its suitability in pavement construction:

i. Mass of oven-dry aggregate in air = 1000 g
ii. Mass of saturated surface-dry aggregate in air = 1025 g
iii. Mass of saturated surface-dry aggregate under water = 625 g

Based on the above observations, the correct statement is

Detailed Solution for Practice Test: Gate Civil Engineering(CE) 2017 Paper - Question 65

Mass of oven dry aggregate wa = 1000g
Mass of water in saturated surface dry aggregate = ww
So, wa + ww = 1025
Mass of saturated surface dry aggregate under water = 625 g

∴ Bulk specific gravity of aggregate

Information about Practice Test: Gate Civil Engineering(CE) 2017 Paper Page
In this test you can find the Exam questions for Practice Test: Gate Civil Engineering(CE) 2017 Paper solved & explained in the simplest way possible. Besides giving Questions and answers for Practice Test: Gate Civil Engineering(CE) 2017 Paper, EduRev gives you an ample number of Online tests for practice