Hydrogen Spectrum - Free MCQ Practice Test with solutions, NEET NCERT Based

The Balmer series just sets n₁ = 2, which means the value of the principal quantum number (n) is two for the transitions being considered. Balmer’s formula can therefore be written:

1/λ = R_H ((1/2²) − (1 / n₂²))

1/wavelength =RH x z² x (1/2²-1/5²) =109677 x 1 x (1/4-1/25) =109677 x 21/100 =2303.2m wavelength=1/2303.2m =1/2303.2 x 10⁷nm =434.1nm~434nm

Any radiation is emitted in the quantized form as photons. These photons are actually generated when an electron changes its energy level. This can happen if the atom gets the required work function. For e.g. The emission of X Ray. When the cathode ray hits the nuclei of heavier metals, two cases may occur - 
1)Nuclei absorbs the electron from K shell and this process results in radiation of energy in form of X Ray photons. 
2)Auger Effect: Sometimes during the collision, an electron from main atom can also be emitted, releasing energy in form of X Ray photons. So, Now it should be more clear that while photons are the product, the real culprit behind the crime scene. So correct option is B These things can be understood easily if you know the basics of Particle Physics.

The negative sign means that the energy of the electron in the atom is lower than the energy of a free electron at rest. A free electron at rest is an electron that is infinitely far away from the nucleus and is assigned the energy value zero.

It was De broglie who proposed the dual nature of matter and that of electrons. Davisson and germer went on to experimentally verify his theory, regarding nature of electrons(they have both particle and wave nature).
Heisenberg further introduced the uncertainty principle, related to dual nature of matter.
Bohr never putforth any such ideals and considered electron as a particle.

Light not absorbed by the sample will, as before, be separated (dispersed) into its component wavelengths (colors) by the prism. The appearance of the spectrum will resemble that obtained without the sample in place, with the exception that those wavelengths which have been absorbed are missing, and will appear as dark lines within the spectrum of colors. If a piece of the photographic film is used instead of the card, the absorption spectrum can be recorded.

An infrared heat lamp is a lamp that uses a special form of incandescent light bulb primarily for the purposes of heat production rather than to generate light. These lamps do produce some light, but most of the energy that they consume is directed towards heating the room.

The incandescent bulb or bulbs in the lamp produce heat by generating infrared light. Normal light bulbs are designed to produce light and the heat they generate is considered to be waste. Conversely, the light bulbs that are used in heat lamps are intended primarily to produce heat, with the light being essentially a waste product.

using the formula:

E = h.v

= 6.63 x 10^-34 x 5.1 x 10¹⁴

= 33.8 x 10^-20 J

The formula to calculate the excitation energy is 13.6Z²(1/n1²-1/n2²), but this gives value in eV. To convert it in Joules we divide it by 6.24×10¹⁸ Here, Z=1,n1=1,n2=3 Putting these values in above formula we have, [13.6×1(1-1/9)]/6.24×10¹⁸ =(13.6×8×10^-18)/(9×6.24) =1.94×10^-18 Hence, the correct answer is C.

The Paschen series corresponds to electron transitions dropping to n = 3. Therefore, the initial state n₁ is 3.

The Zeeman effect is the splitting of the spectral lines of an atom in the presence of a strong magnetic field. The effect is due to the distortion of the electron orbitals because of the magnetic field. The (normal) Zeeman effect can be understood classically, as Lorentz predicted. 

Beta radiation is used for tracers and monitoring the thickness of materials.

Doctors may use radioactive chemicals called tracers for medical imaging. Certain chemicals concentrate in different damaged or diseased parts of the body, and the radiation concentrates with it. Radiation detectors placed outside the body detect the radiation emitted and, with the aid of computers, build up an image of the inside of the body.

Radiation is used in industry in detectors that monitor and control the thickness of materials such as paper, plastic and aluminium. The thicker the material, the more radiation is absorbed and the less radiation reaches the detector. It then sends signals to the equipment that adjusts the thickness of the material.

The groups of electromagnetic radiation are radio waves, microwaves, infrared waves, visible lightwaves, ultraviolet waves, x-ray waves, and gammawaves. I have listed those seven types of electromagnetic radiation in increasing energy.Sound wave energy is distinctly different than electromagnetic wave energy.

For hydrogen Z=1,
and n is given as 1,
Then
E= -13.6 × n power 2/ Z.
E= - 13.6 × 1 power 2/ 1.
E= -13.6e.v.