Test: IP Routing

Question 1

Which type of Ethernet framing is used for TCP/IP and DEC net?

Accepted Answer

Ethernet II

Answer

Ethernet 802.3

Answer

Ethernet 802.2

Answer

Ethernet SNAP

Question 2

You are a system administrator on a NetWare network, you are runningNetWare 4.11 and you cannot communicate with your router. What is the likelyproblem?

Accepted Answer

NetWare 4.11 defaults to 802.2 encapsulation

Answer

NetWare 4.11 defaults to 802.3 encapsulation

Answer

Cisco routers only work with NetWare 3.11

Answer

NetWare 3.11 defaults to 802.2 encapsulation

Question 3

NetWare IPX addressing uses a network number and a node number. Whichstatements are true?

Accepted Answer

Question 4

Which NetWare protocol works on layer 3–network layer—of the OSI model?

Accepted Answer

IPX

Answer

NCP

Answer

SPX

Answer

NetBIOS

Question 5

Which NetWare protocol provides link-state routing?

Accepted Answer

NLSP

Answer

RIP

Answer

SAP

Answer

NCP

Question 6

As a system administrator, you want to debug IGRP but are worried that the“debug IP IGRP transaction” command will flood the console. What is the commandthat you should use?

Accepted Answer

Debug IP IGRP events

Answer

Debug IP IGRP event

Answer

Debug IP IGRP-events

Answer

Debug IP IGRP summary

Question 7

What does the following series of commands accomplish? RouterIGRP 71 network10.0.0.0 router IGRP 109 network 172.68.7.0

Accepted Answer

It isolates networks 10.0.0.0 and 172.68.7.0

Answer

It loads IGRP for networks 109 and 71

Answer

It disables RIP

Answer

It disables all routing protocols

Question 8

The “IPX delay number” command will allow an administrator to change thedefault settings. What are the default settings?

Accepted Answer

For LAN interfaces, one tick; for WAN interfaces, six ticks

Answer

For LAN interfaces, six ticks; for WAN interfaces, one tick

Answer

For LAN interfaces, zero ticks; for WAN interfaces, five ticks

Answer

For LAN interfaces, five ticks; for WAN interfaces, zero Ticks

Question 9

As a system administrator, you need to set up one Ethernet interface on the Ciscorouter to allow for both sap and Novell-ether encapsulations. Which set ofcommands will accomplish this?

Accepted Answer

Interface Ethernet 0.1ipx encapsulation Novell-ether IPX network 9e interfaceEthernet 0.2 IPX encapsulation sap IPX network 6c

Answer

Interface Ethernet 0.1 IPX encapsulation Novell-ether IPX network 9e interfaceEthernet 0.2 IPX network 6c

Answer

Interface Ethernet 0 IPX encapsulation Novell-ether IPX network 9e interfaceEthernet 0 IPX encapsulation sap IPX network 6c

Answer

Interface Ethernet 0.1 IPX encapsulation Novell-ether interface Ethernet 0.2 IPXencapsulation sap

Question 10

What does the “IPX maximum-paths 2” command accomplish?

Accepted Answer

It enables load sharing on 2 paths if the paths are equal metric paths

Answer

It sets up routing to go to network 2

Answer

It is the default for Cisco IPX load sharing

Answer

It enables load sharing on 2 paths if the paths are unequal metric paths

Question 11

You want to enable both arpa and snap encapsulation on one router interface.How do you do this?

Accepted Answer

Assign two network numbers, one for each encapsulation type

Answer

The interface can handle multiple encapsulation types with no extra configuration

Answer

Enable Novell-ether to run multiple encapsulation types

Answer

Both arpa and snap are enabled by default so you don’t have to configure anything

Question 12

By default, Cisco routers forward GNS SAPs to remote networks.

Accepted Answer

False

Answer

True

Question 13

To prevent Service Advertisements (SAPs) from flooding a network, Cisco routersdo not forward them. How are services advertised to other networks?

Accepted Answer

Each router builds its own SAP table and forwards that every 60 seconds

Answer

Each router assigns a service number and broadcasts that

Answer

SAPs aren’t necessary with Cisco routers

Answer

Cisco routers filter out all SAPs

Question 14

Novell’s implementation of RIP updates routing tables every _________ seconds.

Accepted Answer

60

Answer

90

Answer

10

Answer

30

Question 15

In Novell’s use of RIP, there are two metrics used to make routing decisions.Select the two metrics.

Accepted Answer

IP Routing - Free MCQ Practice Test with solutions, GATE CSE (CSE) Computer

MCQ Practice Test & Solutions: Test: IP Routing (15 Questions)

Which type of Ethernet framing is used for TCP/IP and DEC net?

You are a system administrator on a NetWare network, you are runningNetWare 4.11 and you cannot communicate with your router. What is the likelyproblem?

NetWare IPX addressing uses a network number and a node number. Whichstatements are true?

Which NetWare protocol works on layer 3–network layer—of the OSI model?

Which NetWare protocol provides link-state routing?

As a system administrator, you want to debug IGRP but are worried that the“debug IP IGRP transaction” command will flood the console. What is the commandthat you should use?

What does the following series of commands accomplish? RouterIGRP 71 network10.0.0.0 router IGRP 109 network 172.68.7.0

The “IPX delay number” command will allow an administrator to change thedefault settings. What are the default settings?

As a system administrator, you need to set up one Ethernet interface on the Ciscorouter to allow for both sap and Novell-ether encapsulations. Which set ofcommands will accomplish this?

What does the “IPX maximum-paths 2” command accomplish?

You want to enable both arpa and snap encapsulation on one router interface.How do you do this?

By default, Cisco routers forward GNS SAPs to remote networks.

To prevent Service Advertisements (SAPs) from flooding a network, Cisco routersdo not forward them. How are services advertised to other networks?

Novell’s implementation of RIP updates routing tables every _________ seconds.

In Novell’s use of RIP, there are two metrics used to make routing decisions.Select the two metrics.

Computer Networks

Computer Networks

Top Courses for Computer Science Engineering (CSE)

Schools

Competitive Exams

International Exams

Quick Links

About this Computer Science Engineering (CSE) Practice Test

Explore more Computer Science Engineering (CSE) Study Resources