Civil Engineering (CE) Exam  >  Civil Engineering (CE) Tests  >  Test: Rigid Pavement Design Methods - Civil Engineering (CE) MCQ

Test: Rigid Pavement Design Methods - Civil Engineering (CE) MCQ


Test Description

10 Questions MCQ Test - Test: Rigid Pavement Design Methods

Test: Rigid Pavement Design Methods for Civil Engineering (CE) 2024 is part of Civil Engineering (CE) preparation. The Test: Rigid Pavement Design Methods questions and answers have been prepared according to the Civil Engineering (CE) exam syllabus.The Test: Rigid Pavement Design Methods MCQs are made for Civil Engineering (CE) 2024 Exam. Find important definitions, questions, notes, meanings, examples, exercises, MCQs and online tests for Test: Rigid Pavement Design Methods below.
Solutions of Test: Rigid Pavement Design Methods questions in English are available as part of our course for Civil Engineering (CE) & Test: Rigid Pavement Design Methods solutions in Hindi for Civil Engineering (CE) course. Download more important topics, notes, lectures and mock test series for Civil Engineering (CE) Exam by signing up for free. Attempt Test: Rigid Pavement Design Methods | 10 questions in 20 minutes | Mock test for Civil Engineering (CE) preparation | Free important questions MCQ to study for Civil Engineering (CE) Exam | Download free PDF with solutions
Test: Rigid Pavement Design Methods - Question 1

Based on topography and climate of the location which factor is estimated?

Detailed Solution for Test: Rigid Pavement Design Methods - Question 1

The thickness is the most important factor that is designed as per requirement, pavement quality and pavement method are indirectly dependent on pavement design.

Test: Rigid Pavement Design Methods - Question 2

The warping stress is dependent on

Detailed Solution for Test: Rigid Pavement Design Methods - Question 2

The warping stress is due to the variation in the temperature of the pavement depends on length and width.

1 Crore+ students have signed up on EduRev. Have you? Download the App
Test: Rigid Pavement Design Methods - Question 3

The first thickness assumed in pavement is called

Detailed Solution for Test: Rigid Pavement Design Methods - Question 3

The first thickness is assumed as a trail thickness, it may be later revised after design.

Test: Rigid Pavement Design Methods - Question 4

The factor of safety is the stress caused at

Detailed Solution for Test: Rigid Pavement Design Methods - Question 4

The stress caused is measured at the mid day due to wheel load and temperature stress.

Test: Rigid Pavement Design Methods - Question 5

The minimum factor of safety for rigid pavement is

Detailed Solution for Test: Rigid Pavement Design Methods - Question 5

The minimum factor of safety is 1.1 and if it doesn’t satisfy then the pavement thickness is revised.

Test: Rigid Pavement Design Methods - Question 6

 The Westergaard equation was modified by

Detailed Solution for Test: Rigid Pavement Design Methods - Question 6

 The Westergaard analysis gave low stress results so it was modified by Teller and Sutherland at edge.

Test: Rigid Pavement Design Methods - Question 7

 If the flexural strength of a pavement is 45 and it’s stress is 40 then factor of safety is

Detailed Solution for Test: Rigid Pavement Design Methods - Question 7

The ratio of the flexural strength to total flexural stress is called as factor of safety.

Test: Rigid Pavement Design Methods - Question 8

The pavement thickness is usually assumed in rigid pavement as

Detailed Solution for Test: Rigid Pavement Design Methods - Question 8

The trail thickness usually assumed in rigid pavement is 25 cm , if it doesn’t satisfy then the pavement thickness is revised.

Test: Rigid Pavement Design Methods - Question 9

The temperature differential in coastal regions in India for a thickness of 25 cm is

Detailed Solution for Test: Rigid Pavement Design Methods - Question 9

The temperature differential in coastal regions in India is assumed as 16.2 degrees centigrade as recommended by IRC.

Test: Rigid Pavement Design Methods - Question 10

The minimum quality of thickness in the low volume roads is

Detailed Solution for Test: Rigid Pavement Design Methods - Question 10

The minimum grade required is M 40 but for low volume roads M 30 roads can be used.

Information about Test: Rigid Pavement Design Methods Page
In this test you can find the Exam questions for Test: Rigid Pavement Design Methods solved & explained in the simplest way possible. Besides giving Questions and answers for Test: Rigid Pavement Design Methods, EduRev gives you an ample number of Online tests for practice

Top Courses for Civil Engineering (CE)

Download as PDF

Top Courses for Civil Engineering (CE)