Which of the following statements are true regarding the command ip route 172.16.4.0 255.255.255.0 192.168.4.2?
1 Crore+ students have signed up on EduRev. Have you? Download the App |
Which statement is true regarding classless routing protocols?
You have the following routing table. Which of the following networks will not be placed in the neighbor routing table?
R 192.168.30.0/24 [120/1] via 192.168.40.1, 00:00:12, Serial0
C 192.168.40.0/24 is directly connected, Serial0
172.16.0.0/24 is subnetted, 1 subnets
C 172.16.30.0 is directly connected, Loopback0
R 192.168.20.0/24 [120/1] via 192.168.40.1, 00:00:12, Serial0
R 10.0.0.0/8 [120/15] via 192.168.40.1, 00:00:07, Serial0
C 192.168.50.0/24 is directly connected, Ethernet0
What command is used to stop RIP routing updates from exiting out an interface but still allow the interface to receive RIP route updates?
Two connected routers are configured with RIP routing. What will be the result when a router receives a routing update that contains a higher-cost path to a network already in its routing table?
You type debug ip rip on your router console and see that 172.16.10.0 is being advertised to you with a metric of 16. What does this mean?
The Corporate router receives an IP packet with a source IP address of 192.168.214.20 and a destination address of 192.168.22.3. Looking at the output from the Corporate router, what will the router do with this packet?
Corp#sh ip route
[output cut]
R 192.168.215.0 [120/2] via 192.168.20.2, 00:00:23, Serial0/0
R 192.168.115.0 [120/1] via 192.168.20.2, 00:00:23, Serial0/0
R 192.168.30.0 [120/1] via 192.168.20.2, 00:00:23, Serial0/0
C 192.168.20.0 is directly connected, Serial0/0
C 192.168.214.0 is directly connected, FastEthernet0/0
If your routing table has a static, a RIP, and an IGRP route to the same network, which route will be used to route packets by default?
A network administrator views the output from the show ip route command. A network that is advertised by both RIP and IGRP appears in the routing table flagged as an IGRP route. Why is the RIP route to this network not used in the routing table?
What does RIPv2 use to prevent routing loops?
Which two of the following are true regarding the distance-vector and link-state routing protocols?