IPv6, Networking Quiz

Question 1

Which of the following is true when describing a multicast address?

Accepted Answer

Packets are delivered to all interfaces identified by the address. This is also called a one-to-many address.

Answer

Packets addressed to a unicast address are delivered to a single interface.

Answer

Identifies multiple interfaces and is only delivered to one address. This address can also be called one-to-one-of-many.

Answer

These addresses are meant for nonrouting purposes, but they are almost globally unique so it is unlikely they will have an address overlap.

Question 2

Which of the following is true when describing a unicast address?

Accepted Answer

Packets addressed to a unicast address are delivered to a single interface.

Answer

These are your typical publicly routable addresses, just like a regular publicly routable address in IPv4.

Answer

These are like private addresses in IPv4 in that they are not meant to be routed.

Answer

These addresses are meant for nonrouting purposes, but they are almost globally unique so it is unlikely they will have an address overlap.

Question 3

To enable OSPFv3, which of the following would you use?

Accepted Answer

Router1(config-if)# ipv6 ospf 10 area 0.0.0.0

Answer

Router1(config-if)# ipv6 router rip 1

Answer

Router1(config)# ipv6 router eigrp 10

Answer

Router1(config-rtr)# no shutdown

Answer

Router1(config-if)# ipv6 eigrp 10

Question 4

What multicast addresses does RIPng use?

Accepted Answer

FF02::9

Answer

FF02::A

Answer

FF02::5

Answer

FF02::6

Question 5

Which statement(s) about IPv6 addresses are true?

Leading zeros are required.
Two colons (::) are used to represent successive hexadecimal fields of zeros.
Two colons (::) are used to separate fields.
A single interface will have multiple IPv6 addresses of different types.

Accepted Answer

2 and 4

Answer

1 and 3

Answer

1, 3 and 4

Answer

All of the above

Question 6

To enable RIPng, which of the following would you use?

Accepted Answer

Router1(config-if)# ipv6 router rip 1

Answer

Router1(config-if)# ipv6 ospf 10 area 0.0.0.0

Answer

Router1(config)# ipv6 router eigrp 10

Answer

Router1(config-rtr)# no shutdown

Answer

Router1(config-if)# ipv6 eigrp 10

Question 7

Which of the following is true when describing a global unicast address?

Accepted Answer

These are your typical publicly routable addresses, just like a regular publicly routable address in IPv4.

Answer

Packets addressed to a unicast address are delivered to a single interface.

Answer

These are like private addresses in IPv4 in that they are not meant to be routed.

Answer

These addresses are meant for nonrouting purposes, but they are almost globally unique so it is unlikely they will have an address overlap.

Question 8

What two multicast addresses does OSPFv3 use?

FF02::A
FF02::9
FF02::5
FF02::6

Accepted Answer

3 and 4

Answer

2 only

Answer

3 only

Answer

1 and 3

Question 9

To enable EIGRP, which of the following would you use?

Router1(config-if)# ipv6 ospf 10 area 0.0.0.0
Router1(config-if)# ipv6 router rip 1
Router1(config)# ipv6 router eigrp 10
Router1(config-rtr)# no shutdown
Router1(config-if)# ipv6 eigrp 10

Accepted Answer

3, 4 and 5

Answer

1, 3 and 5

Answer

1 and 3

Answer

5 only

Question 10

What multicast addresses does EIGRPv6 use?

Accepted Answer

FF02::A

Answer

FF02::9

Answer

FF02::5

Answer

FF02::6

Question 11

Which of the following is true when describing a link-local address?

Accepted Answer

These are like private addresses in IPv4 in that they are not meant to be routed.

Answer

Packets addressed to a unicast address are delivered to a single interface.

Answer

These are your typical publicly routable addresses, just like a regular publicly routable address in IPv4.

Answer

These addresses are meant for nonrouting purposes, but they are almost globally unique so it is unlikely they will have an address overlap.

Question 12

Which of the following is true when describing a unique local address?

Accepted Answer

These addresses are meant for nonrouting purposes, but they are almost globally unique so it is unlikely they will have an address overlap.

Answer

Packets addressed to a unicast address are delivered to a single interface.

Answer

These are your typical publicly routable addresses, just like a regular publicly routable address in IPv4.

Answer

These are like private addresses in IPv4 in that they are not meant to be routed.

Question 13

Which of the following is true when describing an anycast address?

Accepted Answer

This address identifies multiple interfaces and the anycast packet is only delivered to one address. This address can also be called one-to-one-of-many.

Answer

Packets addressed to a unicast address are delivered to a single interface.

Answer

Packets are delivered to all interfaces identified by the address. This is also called one-to-many addresses.

Answer

These addresses are meant for nonrouting purposes, but they are almost globally unique so it is unlikely they will have an address overlap.

Question 14

You want to ping the loopback address of your local host(with IPv6). What will you type?

Accepted Answer

ping ::1

Answer

ping 127.0.0.1

Answer

ping 0.0.0.0

Answer

trace 0.0.::1

Question 15

Which statement(s) about IPv4 and IPv6 addresses are true?

An IPv6 address is 32 bits long, represented in hexidecimal.
An IPv6 address is 128 bits long, represented in decimal.
An IPv4 address is 32 bits long, represented in decimal.
An IPv6 address is 128 bits long, represented in hexidecimal.

Accepted Answer

3 and 4

Answer

1 and 3 only

Answer

2 only

Answer

2 and 4

IPv6, Networking Quiz - Free MCQ Test with solutions for Campus Placement

MCQ Practice Test & Solutions: IPv6, Networking Quiz (15 Questions)

Which of the following is true when describing a multicast address?

Which of the following is true when describing a unicast address?

To enable OSPFv3, which of the following would you use?

What multicast addresses does RIPng use?

Which statement(s) about IPv6 addresses are true?
Leading zeros are required.
Two colons (::) are used to represent successive hexadecimal fields of zeros.
Two colons (::) are used to separate fields.
A single interface will have multiple IPv6 addresses of different types.

To enable RIPng, which of the following would you use?

Which of the following is true when describing a global unicast address?

What two multicast addresses does OSPFv3 use?
FF02::A
FF02::9
FF02::5
FF02::6

To enable EIGRP, which of the following would you use?
Router1(config-if)# ipv6 ospf 10 area 0.0.0.0
Router1(config-if)# ipv6 router rip 1
Router1(config)# ipv6 router eigrp 10
Router1(config-rtr)# no shutdown
Router1(config-if)# ipv6 eigrp 10

What multicast addresses does EIGRPv6 use?

Which of the following is true when describing a link-local address?

Which of the following is true when describing a unique local address?

Which of the following is true when describing an anycast address?

You want to ping the loopback address of your local host(with IPv6). What will you type?

Which statement(s) about IPv4 and IPv6 addresses are true?
An IPv6 address is 32 bits long, represented in hexidecimal.
An IPv6 address is 128 bits long, represented in decimal.
An IPv4 address is 32 bits long, represented in decimal.
An IPv6 address is 128 bits long, represented in hexidecimal.

Placement Papers - Technical & HR Questions

Placement Papers - Technical & HR Questions

Top Courses for Campus Placement

About this Campus Placement Practice Test

Explore more Campus Placement Study Resources

IPv6, Networking Quiz - Free MCQ Test with solutions for Campus Placement

MCQ Practice Test & Solutions: IPv6, Networking Quiz (15 Questions)

Which of the following is true when describing a multicast address?

Which of the following is true when describing a unicast address?

To enable OSPFv3, which of the following would you use?

What multicast addresses does RIPng use?

Which statement(s) about IPv6 addresses are true?Leading zeros are required.Two colons (::) are used to represent successive hexadecimal fields of zeros.Two colons (::) are used to separate fields.A single interface will have multiple IPv6 addresses of different types.

To enable RIPng, which of the following would you use?

Which of the following is true when describing a global unicast address?

What two multicast addresses does OSPFv3 use?FF02::A FF02::9FF02::5FF02::6

To enable EIGRP, which of the following would you use?Router1(config-if)# ipv6 ospf 10 area 0.0.0.0Router1(config-if)# ipv6 router rip 1Router1(config)# ipv6 router eigrp 10Router1(config-rtr)# no shutdownRouter1(config-if)# ipv6 eigrp 10

What multicast addresses does EIGRPv6 use?

Which of the following is true when describing a link-local address?

Which of the following is true when describing a unique local address?

Which of the following is true when describing an anycast address?

You want to ping the loopback address of your local host(with IPv6). What will you type?

Which statement(s) about IPv4 and IPv6 addresses are true?An IPv6 address is 32 bits long, represented in hexidecimal.An IPv6 address is 128 bits long, represented in decimal.An IPv4 address is 32 bits long, represented in decimal.An IPv6 address is 128 bits long, represented in hexidecimal.

Placement Papers - Technical & HR Questions

Placement Papers - Technical & HR Questions

Top Courses for Campus Placement

About this Campus Placement Practice Test

Explore more Campus Placement Study Resources

Which statement(s) about IPv6 addresses are true?
Leading zeros are required.
Two colons (::) are used to represent successive hexadecimal fields of zeros.
Two colons (::) are used to separate fields.
A single interface will have multiple IPv6 addresses of different types.

What two multicast addresses does OSPFv3 use?
FF02::A
FF02::9
FF02::5
FF02::6

To enable EIGRP, which of the following would you use?
Router1(config-if)# ipv6 ospf 10 area 0.0.0.0
Router1(config-if)# ipv6 router rip 1
Router1(config)# ipv6 router eigrp 10
Router1(config-rtr)# no shutdown
Router1(config-if)# ipv6 eigrp 10

Which statement(s) about IPv4 and IPv6 addresses are true?
An IPv6 address is 32 bits long, represented in hexidecimal.
An IPv6 address is 128 bits long, represented in decimal.
An IPv4 address is 32 bits long, represented in decimal.
An IPv6 address is 128 bits long, represented in hexidecimal.