Electronics and Communication Engineering (ECE) Exam  >  Electronics and Communication Engineering (ECE) Tests  >  Test: Communication Systems - 7 - Electronics and Communication Engineering (ECE) MCQ

Test: Communication Systems - 7 - Electronics and Communication Engineering (ECE) MCQ


Test Description

25 Questions MCQ Test - Test: Communication Systems - 7

Test: Communication Systems - 7 for Electronics and Communication Engineering (ECE) 2024 is part of Electronics and Communication Engineering (ECE) preparation. The Test: Communication Systems - 7 questions and answers have been prepared according to the Electronics and Communication Engineering (ECE) exam syllabus.The Test: Communication Systems - 7 MCQs are made for Electronics and Communication Engineering (ECE) 2024 Exam. Find important definitions, questions, notes, meanings, examples, exercises, MCQs and online tests for Test: Communication Systems - 7 below.
Solutions of Test: Communication Systems - 7 questions in English are available as part of our course for Electronics and Communication Engineering (ECE) & Test: Communication Systems - 7 solutions in Hindi for Electronics and Communication Engineering (ECE) course. Download more important topics, notes, lectures and mock test series for Electronics and Communication Engineering (ECE) Exam by signing up for free. Attempt Test: Communication Systems - 7 | 25 questions in 25 minutes | Mock test for Electronics and Communication Engineering (ECE) preparation | Free important questions MCQ to study for Electronics and Communication Engineering (ECE) Exam | Download free PDF with solutions
Test: Communication Systems - 7 - Question 1

Consider the following test signal patterns

  1. Ramp
  2. Grill
  3. Grey shades
  4. Sine pulse
  5. Picture line up generating equipment

Which of the above are used in TV studios?

Detailed Solution for Test: Communication Systems - 7 - Question 1

All these are standard test signals used in TV studios.

Test: Communication Systems - 7 - Question 2

If aspect ratio is and number of lines in each frame is 625, the number of picture elements in one frame is

Detailed Solution for Test: Communication Systems - 7 - Question 2

Since there are 625 lines in one frame, the number of picture elements is .

1 Crore+ students have signed up on EduRev. Have you? Download the App
Test: Communication Systems - 7 - Question 3

In TV signals colour burst is used

Detailed Solution for Test: Communication Systems - 7 - Question 3

Colour burst consists of a short train of about 10 cycles sent to the receiver along with synchronous signals. It ensures I and Q phase correctly.

Test: Communication Systems - 7 - Question 4

Indicate the false statement: If SWR on a transmission line is infinite, the line is terminated in

Detailed Solution for Test: Communication Systems - 7 - Question 4

If line is OC or SC or terminated in pure reactance, SWR is 1.

Test: Communication Systems - 7 - Question 5

The resonant frequency of an RF amplifier is 1 MHz and its bandwidth is 10 kHz. The Q factor will be

Detailed Solution for Test: Communication Systems - 7 - Question 5

.

Test: Communication Systems - 7 - Question 6

The total number of pulses in a TV remote control is

Detailed Solution for Test: Communication Systems - 7 - Question 6

The 14 pulses are preliminary pulse, start pulse, stop pulse and 11 other pulses.

Test: Communication Systems - 7 - Question 7

Assertion (A): A Smith chart can be used for a number of calculations of a transmission line

Reason (R): Smith chart is basically a polar impedance diagram.

Detailed Solution for Test: Communication Systems - 7 - Question 7

Smith chart is a convenient tool for transmission line design and analysis.

Test: Communication Systems - 7 - Question 8

Which camera tube has highest sensitivity and very wide spectral response?

Detailed Solution for Test: Communication Systems - 7 - Question 8

New vicon has very high sensitivity and very wide spectral response which extends well into infrared region.

Test: Communication Systems - 7 - Question 9

A computer monitor uses 180 W in normal operation and 20 W in sleep mode. The computer is on all the 24 hours but is in sleep mode for 18 hours a days. The energy units saved in 30 days are

Detailed Solution for Test: Communication Systems - 7 - Question 9

.

Test: Communication Systems - 7 - Question 10

Consider the following functions

  1. It detects the AM video carrier IF so as to produce the video signal
  2. It produces and separates out the inter carrier sound IF of 5.5 MHz
  3. It amplifies the video signal
  4. It amplifies the audio signal

The video detector in a colour TV performs which of the above functions

Detailed Solution for Test: Communication Systems - 7 - Question 10

Video detector does not amplify any signal.

Test: Communication Systems - 7 - Question 11

Which of the following antennas is circularly polarized?

Detailed Solution for Test: Communication Systems - 7 - Question 11

The helical antenna is circularly polarized, i.e., its polarization is evenly divided between vertical and horizontal components.

Test: Communication Systems - 7 - Question 12

In colour TV system the colour sub carrier frequency is 4.43 MHz.

Detailed Solution for Test: Communication Systems - 7 - Question 12

Video monitor does not have RF tuner and IF amplifier stages.

Test: Communication Systems - 7 - Question 13

The percentage saving in power of 100% modulated suppressed carrier AM signal is

Detailed Solution for Test: Communication Systems - 7 - Question 13

m = 1,

if carrier is suppressed then

.

Test: Communication Systems - 7 - Question 14

A transmitter power of 5 W is increased by 20 dB. The effective radiated power is

Detailed Solution for Test: Communication Systems - 7 - Question 14

or P = 500 W.

Test: Communication Systems - 7 - Question 15

The maximum distance between television transmission and receiving antennas for reasonably good reception should be

Detailed Solution for Test: Communication Systems - 7 - Question 15

Television transmission is governed by line of sight distance which is about 100 km or less.

Test: Communication Systems - 7 - Question 16

 

Assertion (A): EM waves are attenuated as they travel outward from a source

Reason (R): Both field intensity and power density follow inverse square law.

 

Detailed Solution for Test: Communication Systems - 7 - Question 16

As per inverse square law, power is inversely proportional to square of distance.

Test: Communication Systems - 7 - Question 17

The frequency response of a microphone means

Detailed Solution for Test: Communication Systems - 7 - Question 17

100 Hz is taken as standard for specifying the output.

Test: Communication Systems - 7 - Question 18

Graphic equaliser system in stereophonic systems generally have

Detailed Solution for Test: Communication Systems - 7 - Question 18

Stereo systems have 3 or 4 bands at 300 Hz, 1000 Hz, 10000 Hz etc. in graphic equaliser system.

Test: Communication Systems - 7 - Question 19

An amplifier operating over a frequency range of 18 to 20 MHz has 10 kΩ input resistance. At a temperature of 27º C, the noise voltage at input of amplifier is (Boltzman constant k = 1.38 x 10-23 J/K)

Detailed Solution for Test: Communication Systems - 7 - Question 19

Using Equation Va = (4 x 1.38 x 10-23 x 300 x 2 x 106 x 104)0.5 = 18.2 x 10-6 V.

Test: Communication Systems - 7 - Question 20

Some sources of TV programs are

  1. TV camera
  2. Telecine
  3. VTR
  4. External signal

Which of the above are actually present in a TV studio?

Detailed Solution for Test: Communication Systems - 7 - Question 20

All these are present.

Test: Communication Systems - 7 - Question 21

Two sinusoidal signals of same amplitude and frequencies 10 kHz and 10.1 kHz are added together. The combined signal is given to an ideal frequency detector. The output of the detector is

Detailed Solution for Test: Communication Systems - 7 - Question 21

Y(t) = A cos (2p x 104 t) + A cos (2p x 10.1 x 103 t)

when passed through high pass filter,

Output will be A cos (2p x 10.1 x 103 t) only.

Test: Communication Systems - 7 - Question 22

In Vidicon camera tube, the resistance of photoconductive material on the target plate

Detailed Solution for Test: Communication Systems - 7 - Question 22

Light dependent resistor (LDR) has high resistance in darkness and low resistance in brightness.

Test: Communication Systems - 7 - Question 23

In a satellite transponder the power amplifier feeds power P to the transmitting antenna of gain G. If distance of earth is d, the power flux density is

Detailed Solution for Test: Communication Systems - 7 - Question 23

Available power is PG and is spread over 4 nd2.

Test: Communication Systems - 7 - Question 24

The percentage saving in power of 100% modulated suppressed carrier AM signal is

Detailed Solution for Test: Communication Systems - 7 - Question 24

Pc = 400 W, m = 0.75

Test: Communication Systems - 7 - Question 25

Which of the following are useful in comparing the noise performance of receivers?

  1. Input noise voltage
  2. Noise figure
  3. Noise resistance
  4. Noise temperature

Select answer as per the following codes:

Detailed Solution for Test: Communication Systems - 7 - Question 25

Noise figure, noise resistance and noise temperature are useful quantities. Input noise voltage alone is not sufficient unless gain of amplifier stages is also known.

Information about Test: Communication Systems - 7 Page
In this test you can find the Exam questions for Test: Communication Systems - 7 solved & explained in the simplest way possible. Besides giving Questions and answers for Test: Communication Systems - 7, EduRev gives you an ample number of Online tests for practice

Top Courses for Electronics and Communication Engineering (ECE)

Download as PDF

Top Courses for Electronics and Communication Engineering (ECE)