In a single phase full wave regulator feeding R-L load, the minimum firing angle can be zero.
1 Crore+ students have signed up on EduRev. Have you? Download the App |
An RC snubber circuit is used to protect a thyristor against :
A single phase semiconverter has a freewheeling diode. If the firing angle is a and the load is purely resistive, the periods of conduction and freewheeling respectively are
A dc separately excited motor has a constant field current. The armature is fed from a single phase supply through a semi-converter. When a = 0, speed is 600 rpm. If a = 90º, the speed is likely to be
A single phase step up cycloconverter changes 50 Hz to 100 Hz. Then one half wave of input will give rise to
Which of these triggering methods for series connected SCRs use LASCR in the gate circuit?
The average load current supplied by a thyristor depends on
A dc chopper is feeding an RLE load. The maximum steady state ripple is
In a 3 phase full wave regulator feeding a star connected resistance load the input voltage is 400 V line to line. The firing angle is 160º. The line to line output voltage would be
A thyristor is reverse biased. A positive gate pulse is applied. The thyristor
A single phase half wave controlled rectifier circuit has an R-L load. A freewheeling diode is also in the circuit. When freewheeling diode is conducting the SCR
A 750 A circuit uses thyristor of current rating 175 A. If derating is 25%, the number of thyristors in parallel is
Assertion (A): An inverter does not require forced commutation
Reason (R): A series inverter is a forced commutation inverter.
In a single phase full wave converter (M - 2 connection), the rms transformer voltage is 300 V across each half of secondary. The PIV for each thyristor is
In 180º mode of operation of a 3 phase bridge inverter, two thyristors conduct at one time.
In a single phase full wave ac regulator the rms value of load current is 20 A load is purely resistive. Then
A reactor is used in a dual converter operating in non-circulating current mode.