SolidWorks 2014 Tutorial11: Sketch Fillet Video Lecture | SolidWorks: Essential Training (All Commands included) - IT & Software

good morning let's start a new sketch on
the front plane and just go to the next
feature in the sketch menu we have the
sketch filleted now that you explain
that you have sketch sharper so to use
this sketch philia we can do some
sketches here can make two lines can
make rectangle now let's activate the
sketch fillet here you need the radius
for your fillet let's make it point
millimeter and then either to select the
two edges to create the plate and then
right click on the mouse or okay here or
you can directly select the corner let's
make it then here then we run Tom okay
and let's show one thing else this
activate the plate here we have this
color selected and we choose dimension
inflate and P equal strain corner and
now instead of selecting each corner you
can right-click or selecting you can see
that
Pinsir you know you selected all the
corner included in that then okay so
this is squash pasta and now we use or
shake the dimension each clip so we see
the dimensions each plate so for example
let's make other example we have many
corners here let's fill it
use this considered a whole chips so in
one click you've made all the flats all
these parts
so while selection so when you go to the
right click you can see the type of
selection box selection or rustle
selection officiously box you'll be able
to make box selection so notice go to
next