SolidWorks 2014 Tutorial 15: Convert Entities Video Lecture | SolidWorks: Essential Training (All Commands included) - IT & Software

tutorial 15 let's start a new sketch on
the top layer and this tutorial we're
going talk about D convert entities and
important and time-saving tool and
sketching so to let you understand the
convert entities walking we can try make
some different examples let's try first
make a sketch here can be any kind of
sketching so we have this sketch done so
let's exit from that sketch so we have
sketch one and let's try to make a
sketch to when the top plane to so you
have clear answer simply sketch the same
plane sketch one and now if we have to
make the same sketch as in sketch one
either to try it from start from scratch
draw lines and follow the buttons if you
have complicated sketch it can be not
easy or P do but you can do that in just
few clicks so you can select these lines
and then convert entities so now we have
to sketching that they are lying on each
other so maybe it's quite a logical
they're having to sketching in the same
plan but it is an example to show you
how to convert entities cuz it should
have in logical cases you can be to play
in spiral to each other and you want to
make the same sketch with two different
planes but together but we still didn't
take the listen about inserting planes
I'm drawing on reference planes but this
is the idea how you can use the convert
entities to convert and existed
sketch instead of drawing it from
scratches so let's accept this sketch so
we have just sketching laying on each
other so if you press that I click hide
so you have the second sketch see you
there
so also you can convert entities if the
second sketch on a different player part
to the sketch for example you have that
sketch on the top plane this make the
sketch on the front plane so we are
sending a sketch speak know where to now
you are able to select these lines and
convert convert them tool to sketch
convert entities now let's rotate a
little bit here so now you have that
projected line which represent the
completed entities from sketch one so
this is another example and now also
let's share a different sample let's
extrude one of the sketches here
okay now let's just insert' a sketch
here you didn't take that lesson but
let's quickly do it if you slick that
face you have the NC sketch or a shift
sketch on that plane
now you are able to get these lines or
even your dancing leg Shin convert
entities so you have these selected
lives converted so let's go to see slick
them again convert entities so you have
that sketch on that face in that 3d face
that exists this try to hide the
extruded or so trace now you can see
there are two power sketches each other