SolidWorks 2014 Tutorial 52: Fill Pattern Video Lecture | SolidWorks: Essential Training (All Commands included) - IT & Software

when this is are we going to talk about
another interesting type of pattern the
field pattern so for its here it is
filling an area and make it a pattern
according to that selected area so
either it can be a sketch or a face or
whatever so let's try to activate the
fill pattern here the field boundary
let's select that face so now this phase
will be the filling boundary as you
notice we have these holes from the
previous tutorials so let's see how it
will be now we have the type of
arrangement of the pattern the feature
to pattern we can select that cut from
here so here you notice that it fill it
that empty area but it did then interact
with the already found cut so just type
arrangement you can change it to be
circular or more arranged so on here you
can make distance between the instances
so just keep it to 0 this is the fill
pattern when you are done okay okay type
control C or delete that one and let's
try another fill
let's click a sketch here and make a
slot here okay except it's got the fill
pattern the field boundary select that
sketch you are able to select Li now the
feature to pattern let's select the cup
so you fill it the slot with this cut so
you can make this has between this and a
commit to that can increase or we
country to decrease the number so it is
up to you how to make it and how you
want them so you can do these values
will tell you get you require pattern so
the idea is that you are able to select
a sketch click in that face not the
whole face when you're done okay