SolidWorks 2014 Weldments Tutorial 103 Dealing with new group Video Lecture

and professor we created this table and
we fix it the corners and intersection
legs let's try a supporting member in
the middle for that table so what that
case we need to edit this structure
members we have the structure member is
in the top here where the center member
William who should blame to so this is
in that picture if you look here have
this it just are selected we can try to
create another edge in the middle and
selected with this screw and see what
what happened did a 3d sketch and a
center member issue it is in the middle
okay let's edit this members and try to
debate here slick this you'll notice the
structure couldn't update and selected
the edge for this reason we're going to
try to make a new grow so start a new go
and then select the structure member
click OK then you have that number and
you notice there's not intersecting with
the other members this perfectly located
but now we can rotate that limber and
treated furthermore so edit feature when
you are editing that feature that
contains two groups we are going to work
with the second cool the center member
now let's try to rotate it 45 degree
okay okay when you find the angle and
again as we learned before you need to
locate your profile edit that member
click second group locate profile and it
can never look here okay so we have our
member central member in the middle of
the tip