SolidWorks 2014 Weldments Tutorial 111: Weld Bead; last stage Video Lecture | SolidWorks: Essential Training (All Commands included) - IT & Software

this is the last tutorial in the
well-being section now we are ready to
send this structure to the wounding
process after we are done with the
completing the structure as we want so
we have this table now is ready to be
welded so for that reason we need to
specify the type of welding and how much
you want to win so on you go to the
whole bit we'll bet that the technician
the way to with your structure now we
have these strips in certain to this
session so users can be places for
welding now we can select the faces
where instead your world so select this
face and this face you have that will
inserted there so you can try to will
this way for all your ribs and in the
selection you have also the amount or
three just off with me let's make it 5
millimeter so that mean will give you a
radius of 5 millimeters if you are
familiar with the theoretical part so if
you select both sides it's going to
silly on all sides so I'm going to keep
it on both sides you have all around can
with all around the edges I'm going to
make both sides and I guess it is that
too much will work meant to be added we
can try to make spot welding and the
define will example if you are familiar
with the types
here can select but not keep it to the
default the length for example we think
we have a zoomin but we have this strip
the ring of 35 millimeter I'm going to
increase it to be 30 millimeter so you
have it here you can change the to the
exact place so if we make it this dirty
from Turkey or 55 and here I make 12
millimeter so you have that will is in
the middle so you go to a 110 millimeter
or five millimeter offset from that
number with the length 25 and there in
the interpreted well you can select to
be export welding so we can make it a
gap and read length so we can get make a
gap of 1 point 35 so we can make the
sport length to be 2 millimeter
well why millimeter gap between so I
guess this type of thing is enough and
that will be replicated on the rest of
the ribs we have so by this way you
going to will that structure and be
ready for using the workshop so now we
are done so here you can have a look
there
and if you hover over there you should
see design of Google so this icon here
is going to show the technician how do
we got