115 SolidWorks Assembly Tutorial Inserting more parts; more about coincident

the biggest Wu's the first type of
melting the consonant myth and remember
that we floated that part so now you can
get back and fix it again after we
inserted at MIT so you have your part
fix it on that origin of that simply so
now let's start to find another use for
the coincident made this insert
component browse and okay part two so
now we have a second part this just add
it there and if you want to insert on
the part you can go to the insert and
again browse for part two but you have
other another easier way you can click
on control and drag that part you'll be
able to create different parts by using
the control so now let's activate the
mails let's select the dot edge and
click mail and then click the fix it bar
or surface so you'll have option to make
them confident so as you see here and if
you want to flip the direction you can
click on that oh so you will flip timid
okay good okay so you notice that you
have that surface the bottom surface is
considered with the bottom surface about
so this try for use another case this to
lick that edge and then select that edge
you'll notice that the medicine open
click that edge so confident also will
your your done click OK
so you see that we have different cases
we made the considered with the point
the surface and with an edge so again to
fix so if it let's try to make these two
blocks on each other you can again slick
that surface in the surface then you
have constant then click OK you will
also able to create that with the edges
so now we have to parse our circle each
other when you're done click OK
so if you have apart is not required or
so you can delete it by find it here
then right click lead yes so now you
have two parts inserted each other if
you try to insert another male logically
it will not be necessary so you'll get
over define message so that means you
don't need that because now your secret
is fully defined as you can see here