SolidWorks Assembly Tutorial 122: Angular limit mate Video Lecture | SolidWorks: Essential Training (All Commands included) - IT & Software

this story going to talk about the
angular med we said in the previous
tutorial that this part is not rotating
like this in the real world so we will
try to apply some angular made to limit
this angle so we can give a specific
angle to rotate and here also as you
notice this one also needs some angular
meds so let's start applied the angular
made on the button and the connector
here so we can find two planes that can
be part each other one can apply the
angular me so let's find the first part
here the bottom part is this one you can
try to find the right plane and then go
to the minute advanced me you will find
the angular limits here so we try to
find the second part the connector white
plane as well or the plane which is
parallel to this in this case tried pain
as well so we have these two planes and
you can imagine these two planes come
rotating in a limited angle so let's
make a default angle 30 make here 50-50
okay so let's try now 38 this part now
you notice you we limited the movement
of this part so it is more realistic
right now now let's apply it to the
connector and the top part with the same
five young find the planes or tating
planes
so in this case here we have one plane
for the connector then we have selected
here and then we go to the airport find
the angular plane so this two planes
have to be limited with an angle not
again the way to angular make 32 as you
notice you have to reverse direction 50
- opportunity okay you're done okay now
you notice that we limited the movement
would anger movement 50 spots small
realistic and nice to work with