AutoCAD 3D House Modeling Tutorial - 4 | 3D Home | 3D Building | 3D Floor Plan | 3D Room Video Lecture | Complete Course of AutoCAD 3D (Basic & Advanced) - Software Development

in this 3d I was modeling tutorial we
will see how to model door and place
them at their respective positions so
our door size is 1 meter by to the 2
meter height so we want to make a door
for this opening so we have to change
the uses too right so go to view and
change your UCS - right now we will
create a rectangle of 1000 by 2000 so
just choose rectangle first point right
click dimensions give a length of 1000
and we're top 2000 then click the side
zoom the door zoom this rectangle then
opposite the sides inside of a hundred
hundred so just give up set distance
hundred then select this line click
inside then just explore this internal
rectangle so we can further object it we
just go to modify explode select the
internal rectangle and enter then
opposite by 750 bottom line on the upper
side then offset by 200 the internal
line on the upper side then create one
line from me to meet internally from
this made to bottom with
then upset this line by 51 either says
50 on this side and 50 on right side
then now remove the unwanted ah edges at
first delete the internal edge then trim
the unwanted ages
then this is I don't want this is I
don't want this is on this edge okay
then just give a place full press pool
go inside and then give a depth of 50 mm
50 and then again you press pool go
inside the hole yourself opening just
zoom it
and give the thickness of 25 again in
the other opening faceful going side by
25 same way for other two openings to
inside go inside 25 peaceful go inside
25 so in this way then just rotate this
door so that those opening will come
outside so now right now all are
different so we will just will Union
them to create a single door element
just select all the elements and present
and just rotate it just select it and
change the Sigma to rotate then we want
to rotate in blue direction just click
on blue blue circle zoom it just click
on blue circle and give the angle 1 it
will be exactly we want to make the
opposite direction so in this way this
door is ready just copy this door and
place it at its respective positions
just we will take the bottom it just
zoom at the bottom mean and take the
midpoint and put it at the wall midpoint
so we will just zoom to opening in the
house just zoom here and put it at the
middle of the wall so in this way this
door has been placed here then same way
we will place it here also internally
just orbit it inside okay so for this
actually the midpoint is not available
here so we will place it after after by
changing the midpoint afterwards
so right now we will just a curate we
will leave it and we will put that other
position just so - and see just orbit
and panic and just go inside here so
here one door is required just orbit it
a bit ok now I can see that wall put at
it at the mid so this door has been
placed on there also now just plan it
and just put one door here that we will
move and place it at proper place so we
will just place one door here that we
will move and place it perfect place
so we'll just place it at the end of
this right now and we will move it
inside just escape the copy command I
take the move command select this object
and we will move it by 150 distance
inside so just give the basement give
the direction make the earth on by
pressing f8 so it will move straight
give the distance of 150 so in this way
it has gone in the middle so in this way
all doors on this side has been placed
just say southeast isometric
I'll just assume this area so all those
door has been placed now same thing for
this side again we will rotate it by 180
degree just select this door then select
the blue click on the blue circle and
give the angle of 180 degree we want to
place it opposite on these cells or one
more thing is there actually we can Mir
mirror these doors on this cell so these
side doors will be for mathematical e so
for that we will use mirror 3d so just
give the command mirror 3d mirror ready
enter select all the three doors first
door then second door and third door
here then enter then right-click and
select three points so select so it will
be take this midpoint bottom midpoint
midpoint of this line then midpoint of
this line and midpoint of other side
line so that will be your three points
for the mirror plane and just place
enter so this side doors will be created
by mirroring so this has been placed
here we can orbit and see those doors
here these lower doors has been mirror
so all the internal doors are also been
mirror properly now I want to place two
doors here on the backside of the home
so for that I have to rotate the door in
ninety degree so again select this door
then click on the blue circle and give a
angle of ninety degree escape and just
zoom that so door is properly just we
will move we will just orbit it from
that side so that we can view from this
okay in this opening we want to fit the
door so just move the door say move
select the door enter then we have to
take the middle bottom line so we just
zoom there then take the midpoint of
this bottom line just pan it down okay
so we will just take the midpoint of
this line and again zoo- pan up and here
we want to place it just orbit a bit
okay so it will be at the mood of this
wall so we'll just put it there so we'll
just put at the middle of this wall take
the midpoint of the bottom one okay so
in this way it has been placed there now
just zoom - and now we have to put it
here also so just Orbach it so that we
can copy again then this door also we
can mirror it on the opposite side so
that it will be so just give the mirror
mirror ready select this door enter take
the middle of the bottom line mirror -
deselect object enter then right click
then take the option of three points and
give the first point at the middle of
this line just orbit it so that we can
pick the midpoint
just take this midpoint
just take the midpoint of this bottom
line okay my point then midpoint of the
top line and midpoint of the opposite
line here so we are basically defining
the mid plane basically around which you
want to mirror the center and just orbit
so this door has been placed here
properly just view the in southeast
isometric from from front side we will
see that how it look likes so in this
way the door has been placed properly
internal door and external doors both
the doors we have placed no windows has
been placed door has been placed so in
this way we can view it has been created
like this so we will stop here thanks
for joining
[Music]