AutoCAD 3D House Modeling Tutorial - 6 - 3D Home - 3D Building - 3D Floor

in this tutorial we will model the
bottom portion of the house we will also
create the ground and the steps from
bottom so to create a bottom access we
will okay we will switch back to 3d
modeling then we close this tool
palettes now we will do the top view
from this new top then take the
rectangle commander and create one
rectangle that will define the bottom
portion sizing suppose we want this much
size then switch back to isometric
southeast isometric
now we have to exclude this by one zero
five zero height so just take a extrude
select the just drawn rectangle enter
give the direction on the bottom side
and give the height of one zero five
zero because we want to also add the
steps then switch back to front view
here we want to create the steps so for
switching to front to front
you see a spring just go to click on you
and select friend from this front now
your UCS is changed to front then draw
one vertical line from mid-term it from
this mid to the bottom width then offset
this line by thousand on either side
offset distance thousand then select
this line just drawn
and also do it on both sides this side
again select the same line and I'll
on right set enter then it is that
middle line and then copy this bottom
line at 1:58 so we will have the height
of 154 strips so we will just use copy
edges for pages take the bottom line
enter base point Direction vertical
height of 150 then again copy the same
line enter baseman direction of upside
give high top 300 then use place pool
take this step okay okay all right don't
know taken the take that second line so
that we will propose the complete of a
portion just here is this line enter
then say press pool then take the upper
portion and give a depth of 230 so this
first step is created again we have to
copy those this line above again copy
edges take this second line enter base
point height of 150 against a press pool
again a remaining top portion depth up
to 30 again copy next line so same
process you have to repeat to create
steps up to top of this portion enter
base point direction of distance of 150
press pool again take this portion go
inside by 2:30
I can copy this enter base point
direction of up when you create restful
take the top portion go inside to 30
so the same process need to be repeated
up to say in this way by the bidding the
same process all the steps has been
created up to the top of the veranda now
next thing we want to do is you were
Stone effect to this front surface so
for that we will just erase this line
extraor is on the line is this line and
this vertical line same way vertical
line on that portion left side then we
will have to apply our stone heads stone
effect IDEs so for that we'll switch to
two divisor then we will move the front
view now in this front bottom front
plane we want to apply hair so just give
hatch command from draw take hatch then
select the switch of gravel other
predefined gravel okay then say add pic
point take the internal point here click
there okay then just enter and increase
the skin suppose we will try a scale off
and it just see the preview how it look
like so we just a bit we will increase
it so for 753 you okay so enter to come
out okay so in this way this gravel has
she's applied we will switch back to
southeast isometric now this as is away
from that object so to place it on this
surface excess we have to create the
boundary for thatch so just double-click
on the hatch so dial dialog box came
back then say ready create boundary then
he is asking okay I want it in polyline
then reassociate yes enter and say okay
so it has created the boundary so using
that boundary you can move the hatch and
place it on the desired surface so just
say move
select the hatch and the boundary enter
take this endpoint and put it on this
endpoint so this has is applied now we
want to engrave it or we want to create
a stone like cuts in that surface so for
that just explore the hatch go to modify
section explode
select the hatch and enter then we want
to create the engraving so for that
just select the place pool then take
your cursor inside the hatch just zoom
it take it inside the hatch
[Music]
once it is highlighted then click and go
inside take your cursor inside and give
a depth of 50 so the engineering is form
we can hear it in conceptual visual
style so in this way the stone engraving
is created so same way we will do it on
this this side also so just say peaceful
then take your cursor inside the hatch
and allow you to generate the boundaries
once all boundaries has been selected
allow you to select all the boundaries
then just click then go inside and give
a depth of 50 enter so in this way
engineering is created here also stone
engraving type effect so next thing we
want to do is create a ground so to
create a ground go to Tov you take a top
then take rectangle command and defend
the ground
how much bigger ground do you want
suppose I want this much bigger ground
was rectangle is created
then take the region come on from draw
section draw panel draw region select
the rectangle and press enter
so ground is created just switch your
view to southeast isometric then now
ground is coming above the that
foundation we just created so just move
it just give the move command just same
move
select the object outside object move
give the base point downward direction
so we have to move it by one zero five
zero distance enter so ground will be
shifted to the bottom okay now we want
we will apply color to the ground so for
a plane color right click on home show
panel then properties then select the
ground and click on the properties
window select color then choose the
suitable color what you want okay so in
this way we applied the color to the
ground so in this we have created the
foundation part and ground so we will
stop here now so thanks for joining
you