AutoCAD 3D House Modeling Tutorial - 7 - 3D Home - 3D Building - 3D Floor

in this tutorial we will see how to
create stairs for going to Paris so we
will be creating stairs on the backside
of the room or house so some things we
need to be noted one thing the height of
room is three thousand that we know
already then second thing the thickness
of slab is 115 that means total height
available to you available to us is
three one five zero so if we we are
going to make a stairs of 150 ID 230
width so you feed divided three one five
zero by 150 that means answer is 21 so
we have to make 21 stairs so what we
will do we will make a long stairs
upward then we will shift and again
upward we will take ten stairs so for
making the stairs let's start so at
first we should be on the right plane
for making this case we will just pan a
tad so first we'll change our plane to
right so go to view then check that your
plane is right okay back it is on the
back
all right back and right is opposite
actually so back we will also work
alright so first we will take the go
back to home then we will take polyline
or you can also draw a simple line
polyline so height of stairs is will
make a fit or Thorne height of stairs is
150 and the width is 230 so we will
create line of 150 I 10 to 30 with so we
will just zoom it there okay so in this
way this line has been created and we
will just copy this for 10 times we will
just copy
then select this object enter bottom
base point and top base copy to second
point will be the top base point so in
this way two three then
we make the of just nap tracking of four
and five and you will just copy this
complete again from bottom to top so
this way ten stairs are ready then one
more stairs is needed so we will copy
that last one okay so these are alone
upward stairs what we just move it
further closer
this endpoint to this endpoint alright
then we will just create one line
connecting bottom to top stairs from
bottom to top
okay then we will offset this line by
hundred
okay now it is the internal line alright
now we just create one horizontal line
from the bottom a fit or thon and we
will trim this portion
all right same way on the top also just
create one vertical line and tame that
portion
alright so in this way this stairs are
ready then we will just keep copy of the
stairs for making opposite upward moment
stairs we just copy this or we can also
copy the 3d hogeol right and we will cut
one down ok then face pool take the
place pool to convert it to the 3d just
say place will go inside click give the
direction and say a width of thousand so
these of stairs are ready now I will
copy this and then I will rotate this so
that it will go up so I will just select
the stairs then I will select rotate the
Sigma then I will click on they just
click on blue circle for rotation select
the blue one okay then give the angle of
180 I want to make it exactly opposite
so 180
okay so opposite upward direction stairs
are ready then I will need a platform
here so that I will make op suppose one
meter by 2 meter so for that I will have
to go to top lane so I will just go to
top plane or I can also make in I can
also make it in side plane also so I
will go back to home is a rectangle then
give the base point right click
dimension then rectangle I want of 1000
by 150 thickness click then just press
will go inside this rectangle and give a
width of 2 meter mm okay now I will move
it and I will put it at the end of this
stairs
[Music]
okay above point at the end okay so this
has been fitted properly now this case I
will transfer to other end so it will go
up so I will say that that side what we
the same point on this side okay so both
stairs are ready one for going up and
again further going up so we will just
move this will just the Union this so
that it will accurate we will just move
it and put it there then take this top
end point and we will put in building
our house 3d house get zoom - and kind
it up
okay now now we came nearer to home
I will put it here at the nearest point
we just have this we put it at this
midpoint midpoint okay all right so
where it has been put so in this way it
has been put here now we will shift it
on this side
we will move it further move previous we
will take one base point and second
point make doroth on okay we will go a
bit back all right so in this way we
want to put it then press escape then
just zoom it and orbit it so in this way
it has been created properly the stairs
has been created then will you color to
it now one more platform will be needed
on this side also so that will make up
one meter by one meter so just zoom -
and create a rectangle of one meter by
one meter just say rectangle rectangle
give the start point rightly just click
on rectangle start point rightly
dimensions of one thousand by 150
thickness click then please fill this or
extrude let's we will use extrude
extrude this rectangle by 1000 on the
right so we just extrude it x2 select
object enter give the thickness of 1000
and
then we will just move this and fit at
our required location so just we will
take that side this top up top endpoint
and we will put on the stairs just
Manito
exam it and put it at the end
we just put it at this and top end okay
so in this way this platform is properly
placed then we will just change the
color so it is our sister's so we will
choose the required color suppose we
give you if we use mania magenta how it
look likes no that will not be suitable
so we take some other color
okay
eske so in this way these stairs are
reading and we can just Union them so
that they will be combined so just use
Union for that just select a union and
select all the pieces Union then select
all the pieces to be connected this one
this one this one and this one
press ENTER so they will be properly
connected so in this way we have model
the stairs in the next tutorial we will
see how to create railings for this
stairs we'll stop here thanks for
joining