11- CATIA Beginner Tutorial: Spline Video Lecture | Learning CATIA: For Beginners - Design Softwares

to turn 11 and CATIA for beginners in
this tutorial we're going to talk about
the s p-- line the first tool for
advanced sketching and it is quite
require some attention while using the S
line tool so let's start a sketch choose
any plane and to go to the spline or
insert profile and the spline you have
to tell a spline the spline and connect
or you can reach it here from this menu
the spline so let's choose a spline and
the three points so now it's kind of
tricky to you just press escape it's
kind of tricky to get you accurate shape
of the spline so there are two ways to
get your required shape of the spline
you might be a designer and you are
drawing your sketches and you have a
scan picture for your drawing and you
are following that drawing or by the
spline or you are an engineer and have
your dimensions and equations to reach
the required a spline so now here we
have a spline and as you see contains
many points as you are choosing them and
each point can be moved
free even you can assign some dimensions
between points
first the spoilt for example you can add
400 also the s-plane you can choose a
point and right-click choose close the
spline so you are closing your a spline
and you can also make a dimension
between this spline none just click this
one
we can make a distance between two
splines
with a 140
here you can draw some line to be
intersecting with the UH spline now
let's try to use the second type of a
spline the connect to use the connect
just first make two lines first line
second line and it shows the conduct now
we're going to create a spline
connecting these two lines