41 CATIA V5 Beginner Tutorial Removed Multi sections Solid Basic Video

this is tutorial number 41 and we're
going to talk about the removed multi
section solid exactly like the previous
tutorial the multi section solid but
this one is removing the material so now
let's start making a sketch or a block
to use the removed multi section let's
use this and extruded 100 so now we have
this block and let's create some
sketches on this surface we can make
circle with the rod of exit and let's
draw another sketch here in this face so
also we can draw a circle in the middle
of this block we need to insert a
surface or plane as we learn in the
previous tutorial let's click on the
surface and go to the shape inner tube
shape design to get this icon and this
make an offset this reverse direction
and make it 100
preview okay okay now we have a plane in
the middle of that law you can find it
here this black two-part design
click Play sketch and let's make another
circuit let's make it smaller except
let's make this circle smaller ok see
and now let's activate the remove multi
sections solid or insert sketch remove
multi sections solid activate from the
right side we have the schedule number
three is selected the sketch number four
sketch number two just make sure that
the direction of the points are the same
so need change this hour so we have the
same direction preview okay so now we
have created the remove multi section
love
the next tutorial are we going to make a
path so the knife cut going to follow
the path so see you in the next tutorial