How to Create Text in AutoCAD - AutoCAD Training Tutorial for Beginners

in this tutorial we will be covering the
text concept it's part so to write a
text at first I will set the font in
which font of my text should appear for
that you have to click on annotations
and click on this textile button then by
default AutoCAD gives you standard style
and Arial font is apply there you can
change the font here or you can make
your own style also by clicking on this
new give the proper name to the style
then click on OK
and choose the font what you want
suppose I want this Arial black then
from here you can okay there is no other
option available for area Dulac then
click on apply and close swing this way
we have created one style so we want to
create a text in that style for that
click on this arrow and click on suppose
we want to create a single line text at
first so click on this single line then
specify start point where you want to
write then give the text height how much
you want suppose I want take site up to
then press ENTER and what is what
rotation angle you want suppose I want
it 0 and press ENTER then write down
what you want
by clicking at other position also you
can write it down to come out Chris
enter two times then only come out and
if I want to change the style of this
what I have written then you have to
select it and then click on annotation
and from here you can select the style
suppose I want the standard style so in
this way you can change the style press
escape to come out and if I want to
match the style of this to text with
this then for that you can use match
properties match properties then select
your subject click on the destination
object so then press ENTER to come out
properties of this command these text
will be applied to these are their text
if you want to make any changes to this
stage just double click on it and make
the changes but whatever you want you
can continue making the changes
and you can come out by pressing enter
two times so in this way you can come
out from ADT and if you want to change
the height of this text then you have to
click here on properties command then
click on the text in which you want to
make the changes and just drag it down
so here is in text textural section you
can change the content you can change
the style then you can just addition you
can change the height from here suppose
I want to make height too before then
you can change the rotation angle also
suppose I want 1830 degree since this
way you can give the rotation angle or
zero then you can give the width factor
also
so using this factor only length will
change height will remain the same
suppose I want to stretch it so I will
give it to so it will be stretched if I
want it back then this factor will be 1
if I want to compress it then give the
value lesser than 1 suppose I give point
for you then it will get compressed so
one is the standard value then by using
oblique angle you can make it italic
suppose I give a 30 degree so it will
get slanted so in this way you can
control the properties from here to come
out click on this button and press
escape so in this way you can change the
height and other properties using
properties command so this is all about
single line text suppose if I want to
create a multi-line text then click on
this stick text then click on multi-line
text then you have to define a rectangle
so he is asking me to specify corner
point and other point so you have to
define the area in which in which area
you want to write down multi-line text
so multi-line text will be like a Word
document so you will be writing below
one another so here you can write down
whatever you want suppose I want nodes
so from here you can change the style of
all that all the text and he's changed
effect with all the text he is giving
with the warning say yes or by selecting
individual you can change the height
suppose I want height to be three then
you can whatever is selected you can
make it bold italic underline over line
strike to is also there then you can
make it uppercase or lowercase if you
want to convert it into a per case or
lowercase that you can do from here then
you can change the font what font you
want suppose I want a deal Arial black
then you can choose the color then if I
select below two lines then from here
you can do the number bullets you can
use numbering you can give bullets or
you can turn it off also from here you
can control the line spacing from here
how much line spacing you want that you
can control from here then you can
control the alignment Center right left
what alignment you want then if you want
to put some special symbol here then
from here you can put that so if I want
diameter symbol so diameter is there and
these are the shortcuts also if you are
using single line text and you can use
this shortcut to give you those sticks
those symbol in that text or you can use
your plus minus if some symbol is not
available here you can go for this other
option so it will bring the character
map windows character map so from here
you can go to bendings finding font and
you can choose the selected choose the
desire symbols i want this phone so
select
then copy then close it and right-click
and paste here so that symbol will be
available here so you can give any
symbol you want you can do undo and redo
from here if you make make something
mistake you can from inside only we can
do undo and redo so to come out you have
to click on this closed text editor so
to edit just double click on it and you
can edit the takes return inside it and
same way if you want to put this Dyer
symbol + degree symbol in a single line
text then click on single line takes
give the start point use the height use
the rotation angle and for diameter you
have to type there % percent see if you
want diameter symbol if you want degree
symbol then you have to write % percent
D and if you want + - combined then you
have to give % % P so in this way you
you can use symbols also in single line
text and if you want to do underlines
then you have to put % % you from where
you want to start the underline and if
you want to limit the underline then at
second position again you have to write
down % % you so in this way you can
control the underline in single line
text also so this enter to come out so
in this way you can use text concept in
AutoCAD