AutoCAD Floor Plan Tutorial for Beginners - 3 Video Lecture | A complete Guide to AutoCAD (English) - Design Softwares

in this tutorial we will be placing
doors and ventilators that so first we
will start with ventilators so the size
of ventilator is 0.6 meter it is at the
center here so we will clear place those
ventilators on window layer only so we
make the window layer current
take the line command now we want okay
we the object snap is off make it on
then take the midpoint and again take
this midpoint come back here enter then
offset is bar offset it by 0.3 on either
side enter it is the center line draw
one line
wait to meet then upset with 0.05 enter
select the line go on upper side and
click select again line gone down side
and click enter to come out then it is a
enter select object enter so this way
when ventilator is created then copy
this ventilator here so copy select
object with window selection enter
select the midpoint to the this midpoint
enter and you can double click scroll
for some extent so in this way
ventilator is created then next is door
so this one metre door we want to create
so let's start so for that at first
click on layer properties we will create
new layer for door so give the name door
choose the color put
close it make the door layer current
then select line command come midpoint
of this to the midpoint of this then go
to the oxide give one meter again enter
enter to come out then here we will
place one arc actually so for that we
will use start Centurion method now arc
is created always in the anti-clockwise
direction so this way this point we will
give as a start point this is a center
point and this is the end point so in
this way the story's created then next
is this door this door is the mirror
image of this door so you just mirror
this door so just select mirror select
object enter give first point of mirror
line suppose I will choose here midpoint
of this line give second point press
Enter so in this way this door is
created it was exact exactly at the
mirror then next will be these doors so
these are d1 that is 0.9
so again we will take a line
take click on the midpoint to midpoint
give the direction give the length of
0.9 enter again now start center end is
command is already active just click on
that circle arc is created in
anti-clockwise so we will give this as a
start point this has a center point this
is a end like so this door is created
then next will be this door so this door
is again mirror up this door so again we
will choose mirror select object enter
give the midpoint to the other point
and enter then move it
okay these distance seems to be
different we will just measure the
distance on this point to this point
just drag this midpoint so it is right
okay we will move it more select object
enter give this end in point to this
midpoint okay
this is correct then again this door
will be the mirror of this so we will
again mirror it enter your first point
second point enter then move it again
move select object enter take the upper
quadrant and place it at the mid of this
then next will be these two doors this
those so d2 we will create that so d2 is
0.8 so we'll create one line commit of
this
then pack this point made a point and
come back to original position go
forgive the length of point eight enter
to come back again start Center and get
the start point center point input in
this video is created then this door so
these two doors are same so we will just
copy this door here we will just say
copy select object enter then take the
upper end point now we want to copy it
make the earth off so we want to copy it
here actually
the distance now this wall thickness is
point 15 so we have to copy it at a
distance of point zero seven five so
we'll just drag that point come go to
right side and give a distance of zero
point zero seven five and press Enter
and then again press ENTER to come out
so it has been placed properly now here
actually opening remained ism more than
the door size so what we can do we can
stretch this part download or we can
also trace this part of what
so we will straight stretch this wall
upward switch select object
enter then give the point in line of
this point so just track it click the
point view the second point so in this
this door is placed properly so all the
doors has been placed ventilator has
been place so we'll stop here