AutoCAD House Elevation Tutorial Video Lecture - A complete Guide to AutoCAD

in this tutorial we will create
elevation so plan we have already
created the plan so we will now create
the elevation line so for that the
elevation the pillai where already have
created the p length line here so we
will just drag this point and the height
of the p length is 0.6 again 3 meter is
a 10.15 slab is there so let's start we
will be using the wall layer for all
this work so we will make wall layer
current and we will take line command
just hold your cursor for some time on
the endpoint of this p length line and
just drag your mouse don't click and
once you are at teaser position click
there then again track from this pill
int line make or thorn so line will come
straight click then height is 0.6 again
here click click click enter
then wall line it from here I can track
that wall line click and use the height
of 3 meter then slab will come outside
by 0.3 and slab by T's point 15 then
again here in this line it is click then
point 3
point fifteen again pointers then close
enter then join these two lines modify
joint so slab will be played enter
then here pillion line remained actually
what your wall line will come inside
actually here so we'll just break it
here
break at point click the line ok the
line is up to that only so no no need to
break press escape move this line by
point one inside move select object
enter base point gather Direction 0.1
enter then stretch this five point one
stretch click second point enter kill
daya base point and Direction give the
length of point one so in this way it is
great then next will be we will be
creating the elevation by looking from
this direction upward so next will be
this wall line so this wall line will
come there or actually okay from this we
will create one line and a door is there
that we will be moving so we'll just
drag this point click and height of door
is 2 meter so we'll go to then with the
top door is again one meter and I can
come down drag the end point and click
increase enter so this I want on the
door layers just select it and make it
door this is skip now make the door
layer current
now we want to create this door so you
want to create this door so it is not
drawn properly actually so because door
is inside by wall thickness so we just
upset it
or we will just connect we will again
break it here so that we can use it so
we will say break at point select object
click the point again break at point
select object click the point then we
will connect it using join command
joined select object then enter then
offset it by offset 0.05 50mm enter
select the object click inside enter
then from made a point we will create
one line from the mid to the mid enter
then offset this line again offset by
suppose hundred point one enter on the
inside enter so in this way then you
will just trim it trim enter and remove
the unnecessary apps enter to come out
so in this way this door is rating after
that they robbed then steps are here for
steps has been given point six is died
so point 15 we will take as offset
distance for steps and those are drawn
up to this and again this wall line is
also visible will be visible there so we
will create that line overall line so
will create a line from this point to
track the end point and click and place
escape to come out then use match
property to match the layers enter to
come out so in this way this door is
ready then next will be these steps
again for steps we want one line from
here
so we'll take line from the same point
and track the same point and click enter
when I want the states on the steps
layer so I will make the stretch layer
current and change this layer to steps
escaped to come out there now one steps
up to this so I will create one more
line or I I can copy this line select
object enter and going to enter enter
then below person I have to upset so I
will offset by 0.5 teen enter select
object now I have to offset it multiple
times so I will choose the multiple
option and I will just click on the
person so it will be automatically
updated then press ENTER to come out
then trim it trim enter select the
crossing windows it will be trimmed
quickly enter then select this object
and convert it into States escape to
come out so in this way this stitch has
been created then next will be the this
window you have to create it
like the point for the window take the
line and go up so we want it in the line
of this door so we'll take the door
point also and click there then within
the width is one point five then we will
take the height of 1 meter again we will
track it and connect it and enter we
will just joined it and take all the
object press ENTER then we are top set
it inside so we will takeoff set by 0.05
enter click the line click inside enter
then actually we want to divide this
into three parts so we just explode it
explode select object enter so that we
can create like this so we'll just use
from here the divide option so click on
divide and select object to divide
number of segments is three enter then
now that those points are divided
divided a ssin point or not not visible
for go for to make them visible click on
this utilities point style and select
the style you want ok so those points
are visible draw a line from this point
so for that node object snap needs to be
used so if it is node object snap is not
coming there so for that here to right
click on this object snap setting and
tick the node object snap so that it
will come automatically or you can also
take it manually by holding down the
shift key and right pressing the right
label button from here also you can
choose the node of dick-slap
so from this point just track the
midpoint click enter then on either side
where top cities by 0.025 income select
object on this side select object on
this set enter then it is the Yenta
select object enter then copy this to
object here copy select object enter
this node to this mode enter then just
it is and delete these two use the
window selection and touch saying this
way this window is created then here a
glass suppose this object to be placed
on window the select object click on the
window escape then make the window layer
current
so I want to want to draw lines for
glass so take the line command click
make ortho for inclined line and give
the distance so here it is showing me
point to around so you point to press
tab Q the angle of 45 degree enter
enters to come out
then again line suppose from here I will
take it again drag it so it is around
0.1 0.1 tab 45 enter enter then mirror
it mirror select object enter this is
the first point this is the second point
enter so this is a glass symbol then
copy it select object enter this is the
best point and this is the second enter
then above we need a charger so for that
we will make this change a layer current
so take the line command from here we
are coming out by 0.1 hundred mm
then again above point one make the or
thorne press f8 point one then here one
point five flow that means one point
seven again here click the line and
click so we don't want it here hidden
here so put it in window layer only
we'll select it and put it in window
layer press escape to come out so in
this way which is created then next will
be the same here 0.6 charger for other
window so you will track make the window
layer current will use the line command
tag this point tag the bottom point
click go four point six enter then from
the upper point
I can offset it by point one select
object on the Perseid enter here I want
it inside of a point one so I will just
click it click the grip go inside and
give point one distance this escape and
connect it by using line command first
point second point escape so this is
created for this window this charger has
been created then next will be the
hatching gravels we are to put their
gravels so for that we will create
suppose one layer new layer for a hatch
will give some color faint color close
it like the hatch current then from here
you can give the hatch click on the
hatch then click here to see all the
available patterns then scroll it down
here is the prowl then click inside now
gravels are shown very big so you can
premiere reduce the scale make it focus
point 5 then close crea close has click
on a close as creation so this gravel is
also created so here we have to you
write down fill in so again we will go
for from here also you can go for multi
later
click make orthos f/8 click man right
down there silent tilt on it and click
outside
so in this F this elevation is also
created so we will stop
you