Design Softwares Exam > Design Softwares Videos > A complete Guide to AutoCAD (English) > AutoCAD House Section Drawing Tutorial - 1
AutoCAD House Section Drawing Tutorial - 1 Video Lecture - A complete Guide
Text Transcript from Video
in this tutorial we will create house
cross-section drawing this this will be
the coin that we will be creating so
cross-section has been taken
as per this section line a b c d that
means at this position it has been cut
and this has been removed and by
standing here if we look on this side
then what is visible that will be
drawing in the cross-section drawing so
when we cut this so we can view this a
wall then this wall this door and this
door then this wrist or this wall and
this window and this wall so all this
component will be visible so from here
so we'll just start it
so follow
taking wall we will be again using the
wall layer so we will take line command
and track this point we length point
click make or thong or straight line
then track this another point click
enter to come out then we will offset
this line by 0.3 offset point 3 enter
select object go on the right side and
click there and enter so it says this
this wall is created so after that
this wall is created after that this
wall to be created so this wall will be
that means this wall so the gap between
this and this wall is two point one
meter so will be again offset by two
point one meter this wall on the right
side again select this wall and the wall
thickness is 0.15 enter so this wall is
created after that this one so this wall
at a distance of
for 4 meter 4 meter so we log set again
from this point
at a distance of 4th and again from this
point to this point point three so in
this way these three walls has been
created and again this wall so again the
gap between this wall is for friend for
you so again we will offset by four
point five you select this line view for
point five and again thickness is point
three point three so enter to come out
so these three walls has been four walls
has been created so after that slab to
be made so we will take line command
from this point go on the left side and
you pointer distance
so we can track this point and again
from we will click here and after that
we will go again four point three again
point 15 and connect it back here this
enter to come out so this lab is created
so next thing will be creating this
footing foot enjoying so here the
dimension has been given so this abode
dimension is 0.4 and then height is 0.6
so you start it from the center and we
will take one I'll create one up and we
will mirror it so again we will take go
for line or we can also make a layer
quad footie and give some color for it
and make the footing layer current
and take the line so I want maybe
between this two point so just shift
hold shift button and right-click and
choose from your mid between two points
and click this two points so it will
give you weighed item ethically so this
is this distance is 0.2 then height is
0.6 after that so this is this is 0.4
between these two vertical lines so we
have taken point two I to again point
six after that next is point six again
that means we will have to go by point
one only and after that this is pointed
so again point one so in this way and
height is point thirty five so from here
we will go for point one
Oh point one this is point six point one
all right four plus two okay after that
point a height is point 35 point 35 site
will be point 35 again we will go by 0.1
again we will give a height of point 35
and the after that is putting length
they have not okay it is one point two
so 0.8 0.4 that means point two outside
by 0.2 and below point two so here we
will again go four point two and below
point 2 then we will come up to Center
and press ENTER to come out so in this
way this has been created so that we
will mirror it
just create the mirror select object
using window selection enter give the
first first point give the second point
press ENTER to come up then connect
these two lines using join command
joined so a single line will be form
press ENTER to come out so in this way
the floating is ready and after that
okay we will copy this footing at this
three positions or four positions
actually so we'll choose copy then
select object enter then we will take
this endpoint and now we want to copy at
mid between these two points so just
hold down shift press shift button and
right click and click on made between
two points and click these two points
again shift rightly will be between two
points
again shift slightly we're between these
two points enter that means this
footings are now ready although for
footings has been placed properly then
this footing to be cut at 0.6 at in
second opposition so for that here it
needs to be cut and we have to put dead
zigzag line so for that you can go to
express tools choose Express click on
extras tools and select this break line
symbol and track the midpoint click you
the second point and give the position
for brick symbol so in this way it has
been created then go to home trim enter
we move this object enters any raise UE
enter and select by crossing window
press enter so in this way this has been
created so now next we will start this
detailing so here this door is required
so this door is this door so it is
appointed dimension so we already have
created one door here so we can copy the
same door here so we'll just copied copy
select object enter
then take this as a base point and we
will make it we can track this midpoint
above and click there actually we can
copy this door here also so here we will
copy that again we will track the
midpoint and click
Chris escape to come out now this door
size is currently it is of 1 meter
length we can check that it is 1 meter
but we need it off point it so we'll
just stretch it by 0.2 so select the
stretch give the point give another
point
enter give the base point gather
direction and give the distance of point
2 so this second door now this second or
is this door so it is of 0.9 so we will
stretch by 0.1 so we stretch it again
stretch select object enter base point
Direction point 1
now the third door is again here so we
will mirror it so it will come on the
opposite side also
so that this door will be created so
we'll just mirror it so mirror select
object using crossing window enter then
mirror line will be at the center so you
can choose this end point give the
second point enter so in this way this
door is created so in this way door has
been created then we can create this
window so for creating this this window
is of 2 meter length so we can use this
window directly so we are weaving from
inside here this way actually this
window will be created there we are
weaving from inside therefore we don't
need this locked so we'll copy this
window so it is at a center of this so
we just will create one line at the
middle to take the reference so create a
line and we want line between these two
points so ship directly will between two
points and we will create up to this end
up escape to come out
and we will just copy this window copy
select object use the window selection
enter this point we will just keep it
here and we will place it later properly
after completion escape so this window
was of 15 1.5 meter length we need a op
2 meter length so we will stretch it by
another founded mm so Stage Select
object enter give the base point give
the direction and give the distance of
0.5 that means this window is is now of
2 meter length escape then we will just
copy this here
so we'll just copy select object enter
so we will take this as a base point and
this is the second point escape to come
up so in this way this wind is ready now
this mid point should be at this point
so we will move it move select object
enter take this mid point put at this
intersection point then e raise e enter
this line enter so in this way this
window has been placed properly so
window all doors are there so after that
we will create suppose these these lines
point six lines and these ground-level
lines so for that again we will take
suppose line command
and from this four we can connect these
lines also escape modify giant click on
these lines or directly you can connect
this enter so it has been connected so
same way point six line you can connect
joint this line and this line enter so
this line is created then in between
actually we don't need line in between
so we will just trim it so for Tim you
can do T add as a shortcut press enter
then again press enter for selecting all
object as a cutting edges and click on
the
to get a mode in this radius is created
so after this one more line is required
for to show the ground level so click
line draw it this Cape to come out press
ENTER to repeat the line command first
point second point at interest
so this below part is created then after
this
now this divided nation needs to be done
there so for that suppose we will take
it 0.3 then suppose point 1.25 we'll
just start it up sit side by 0.3 select
this line inside again after this
suppose we will go for 1.25
point went 1.25 will not be there
actually it will be zero point 1 1 2 5
so it will select the line 0.125
0.125 now again select this line 0.125
so in this way after that this sand bed
will take now remained its take it one
and point 75 that mean 0.1 and 0.075 so
press Enter we'll take offset and
distance is point 1 enter and give on
the upper side click and you on the
opposite this enter to come up remove
this line inter select enter so in this
way this layer sizing created
next we'll be
so all the drawing work has been
completed so what is adamant is hatching
then dimensioning so that we will be
doing in the next tutorial thank you
we'll stop you
you
you
cross-section drawing this this will be
the coin that we will be creating so
cross-section has been taken
as per this section line a b c d that
means at this position it has been cut
and this has been removed and by
standing here if we look on this side
then what is visible that will be
drawing in the cross-section drawing so
when we cut this so we can view this a
wall then this wall this door and this
door then this wrist or this wall and
this window and this wall so all this
component will be visible so from here
so we'll just start it
so follow
taking wall we will be again using the
wall layer so we will take line command
and track this point we length point
click make or thong or straight line
then track this another point click
enter to come out then we will offset
this line by 0.3 offset point 3 enter
select object go on the right side and
click there and enter so it says this
this wall is created so after that
this wall is created after that this
wall to be created so this wall will be
that means this wall so the gap between
this and this wall is two point one
meter so will be again offset by two
point one meter this wall on the right
side again select this wall and the wall
thickness is 0.15 enter so this wall is
created after that this one so this wall
at a distance of
for 4 meter 4 meter so we log set again
from this point
at a distance of 4th and again from this
point to this point point three so in
this way these three walls has been
created and again this wall so again the
gap between this wall is for friend for
you so again we will offset by four
point five you select this line view for
point five and again thickness is point
three point three so enter to come out
so these three walls has been four walls
has been created so after that slab to
be made so we will take line command
from this point go on the left side and
you pointer distance
so we can track this point and again
from we will click here and after that
we will go again four point three again
point 15 and connect it back here this
enter to come out so this lab is created
so next thing will be creating this
footing foot enjoying so here the
dimension has been given so this abode
dimension is 0.4 and then height is 0.6
so you start it from the center and we
will take one I'll create one up and we
will mirror it so again we will take go
for line or we can also make a layer
quad footie and give some color for it
and make the footing layer current
and take the line so I want maybe
between this two point so just shift
hold shift button and right-click and
choose from your mid between two points
and click this two points so it will
give you weighed item ethically so this
is this distance is 0.2 then height is
0.6 after that so this is this is 0.4
between these two vertical lines so we
have taken point two I to again point
six after that next is point six again
that means we will have to go by point
one only and after that this is pointed
so again point one so in this way and
height is point thirty five so from here
we will go for point one
Oh point one this is point six point one
all right four plus two okay after that
point a height is point 35 point 35 site
will be point 35 again we will go by 0.1
again we will give a height of point 35
and the after that is putting length
they have not okay it is one point two
so 0.8 0.4 that means point two outside
by 0.2 and below point two so here we
will again go four point two and below
point 2 then we will come up to Center
and press ENTER to come out so in this
way this has been created so that we
will mirror it
just create the mirror select object
using window selection enter give the
first first point give the second point
press ENTER to come up then connect
these two lines using join command
joined so a single line will be form
press ENTER to come out so in this way
the floating is ready and after that
okay we will copy this footing at this
three positions or four positions
actually so we'll choose copy then
select object enter then we will take
this endpoint and now we want to copy at
mid between these two points so just
hold down shift press shift button and
right click and click on made between
two points and click these two points
again shift rightly will be between two
points
again shift slightly we're between these
two points enter that means this
footings are now ready although for
footings has been placed properly then
this footing to be cut at 0.6 at in
second opposition so for that here it
needs to be cut and we have to put dead
zigzag line so for that you can go to
express tools choose Express click on
extras tools and select this break line
symbol and track the midpoint click you
the second point and give the position
for brick symbol so in this way it has
been created then go to home trim enter
we move this object enters any raise UE
enter and select by crossing window
press enter so in this way this has been
created so now next we will start this
detailing so here this door is required
so this door is this door so it is
appointed dimension so we already have
created one door here so we can copy the
same door here so we'll just copied copy
select object enter
then take this as a base point and we
will make it we can track this midpoint
above and click there actually we can
copy this door here also so here we will
copy that again we will track the
midpoint and click
Chris escape to come out now this door
size is currently it is of 1 meter
length we can check that it is 1 meter
but we need it off point it so we'll
just stretch it by 0.2 so select the
stretch give the point give another
point
enter give the base point gather
direction and give the distance of point
2 so this second door now this second or
is this door so it is of 0.9 so we will
stretch by 0.1 so we stretch it again
stretch select object enter base point
Direction point 1
now the third door is again here so we
will mirror it so it will come on the
opposite side also
so that this door will be created so
we'll just mirror it so mirror select
object using crossing window enter then
mirror line will be at the center so you
can choose this end point give the
second point enter so in this way this
door is created so in this way door has
been created then we can create this
window so for creating this this window
is of 2 meter length so we can use this
window directly so we are weaving from
inside here this way actually this
window will be created there we are
weaving from inside therefore we don't
need this locked so we'll copy this
window so it is at a center of this so
we just will create one line at the
middle to take the reference so create a
line and we want line between these two
points so ship directly will between two
points and we will create up to this end
up escape to come out
and we will just copy this window copy
select object use the window selection
enter this point we will just keep it
here and we will place it later properly
after completion escape so this window
was of 15 1.5 meter length we need a op
2 meter length so we will stretch it by
another founded mm so Stage Select
object enter give the base point give
the direction and give the distance of
0.5 that means this window is is now of
2 meter length escape then we will just
copy this here
so we'll just copy select object enter
so we will take this as a base point and
this is the second point escape to come
up so in this way this wind is ready now
this mid point should be at this point
so we will move it move select object
enter take this mid point put at this
intersection point then e raise e enter
this line enter so in this way this
window has been placed properly so
window all doors are there so after that
we will create suppose these these lines
point six lines and these ground-level
lines so for that again we will take
suppose line command
and from this four we can connect these
lines also escape modify giant click on
these lines or directly you can connect
this enter so it has been connected so
same way point six line you can connect
joint this line and this line enter so
this line is created then in between
actually we don't need line in between
so we will just trim it so for Tim you
can do T add as a shortcut press enter
then again press enter for selecting all
object as a cutting edges and click on
the
to get a mode in this radius is created
so after this one more line is required
for to show the ground level so click
line draw it this Cape to come out press
ENTER to repeat the line command first
point second point at interest
so this below part is created then after
this
now this divided nation needs to be done
there so for that suppose we will take
it 0.3 then suppose point 1.25 we'll
just start it up sit side by 0.3 select
this line inside again after this
suppose we will go for 1.25
point went 1.25 will not be there
actually it will be zero point 1 1 2 5
so it will select the line 0.125
0.125 now again select this line 0.125
so in this way after that this sand bed
will take now remained its take it one
and point 75 that mean 0.1 and 0.075 so
press Enter we'll take offset and
distance is point 1 enter and give on
the upper side click and you on the
opposite this enter to come up remove
this line inter select enter so in this
way this layer sizing created
next we'll be
so all the drawing work has been
completed so what is adamant is hatching
then dimensioning so that we will be
doing in the next tutorial thank you
we'll stop you
you
you
About this Video
4.85/5 Rating
Apr 18, 2026 Last updated
Related Exams
Video Description: AutoCAD House Section Drawing Tutorial - 1 for Design Softwares 2026 is part of A complete Guide to AutoCAD (English) preparation. The notes and questions for AutoCAD House Section Drawing Tutorial - 1 have been prepared according to the Design Softwares exam syllabus. Information about AutoCAD House Section Drawing Tutorial - 1 covers all important topics for Design Softwares 2026 Exam. Find important definitions, questions, notes, meanings, examples, exercises and tests below for AutoCAD House Section Drawing Tutorial - 1.
Introduction of AutoCAD House Section Drawing Tutorial - 1 in English is available as part of our A complete Guide to AutoCAD (English) for Design Softwares & AutoCAD House Section Drawing Tutorial - 1 in Hindi for A complete Guide to AutoCAD (English) course. Download more important topics related with notes, lectures and mock test series for Design Softwares Exam by signing up for free.
Description
Video: AutoCAD House Section Drawing Tutorial of A complete Guide to AutoCAD have been curated by the Design Softwares experts, helping you revise the topic quickly for exam preparation. Watch on EduRev.
Information about AutoCAD House Section Drawing Tutorial - 1
Here you can find the meaning of AutoCAD House Section Drawing Tutorial - 1 defined & explained in the simplest way possible. Besides explaining types of AutoCAD House Section Drawing Tutorial - 1 theory, EduRev gives you an ample number of questions to practice AutoCAD House Section Drawing Tutorial - 1 tests, examples and also practice Design Softwares tests.
Related Searches
Previous Year Questions with Solutions, Free, shortcuts and tricks, video lectures, Objective type Questions, study material, ppt, mock tests for examination, practice quizzes, AutoCAD House Section Drawing Tutorial - 1, AutoCAD House Section Drawing Tutorial - 1, Extra Questions, Important questions, MCQs, pdf , Semester Notes, AutoCAD House Section Drawing Tutorial - 1, Sample Paper, Viva Questions, Exam, past year papers, Summary;