AutoCAD 3D House Modeling Tutorial Beginner Basic - 2 Video Lecture - A

in this tutorial we will be creating
door and windows so suppose we want to
create this window we know that the size
of this window is 2 by 1 meter so at
first we we will have to change the
plane on which plane we want to work if
you choose the AC isometric then this
plane is right Ike right
this plane is front so I want to create
on this plane so I will change my users
to write plane so click here on right
and here you can view that GD horizontal
and XY is vertical and if you don't want
this greedy you can make it off from
here great display now using rectangle I
can create a rectangle rectangle click
outside use the first point then click
on dimension choose the length of 2 and
a height of 1 and click zoom it an
offset offset by 0.05 0.05 enter click
the rectangle click inside then key
select line command create a line from
midpoint to midpoint enter to come out
then offset this line box it by 0.025 on
either side first on right side suppose
then on the left side inter then it is
the middle line for that you can give a
enter select the line to this enter then
trim the
portion for that here is the trim then
select these two line as a cutting edge
press enter and remove the unwanted
object press ENTER to come out then
press fill it take the peaceful command
go inside the window go on the frame so
take it on one corner and give the
direction so you want to go inside by
0.05 enter enter this window frame is
created we want to create a glass so for
that again take the rectangle command
zoom below here and click on the
midpoint and click on the opposite
midpoint of the same frame now this
rectangle is created convert it into
region click on this draw and take the
region command and click on this
rectangle and press Enter so in this way
this plane will be created which will
act as a glass then move this or copy
copy so you have to copy the glass and
the frame so click on the glass and the
frame then enter then suppose I will
take this as a base point this mid point
then make ortho if it zoom here so I
want it inside so just orbit it slightly
by holding down the shift n scroll and
dragging the mouse and click on this mid
point so here it has been placed another
we want to place here so click on this
mid point press escape to come out so in
this way this window has been properly
placed so same way you can we will erase
this window enter so same way you can
create this window on the front plane so
from here you have to choose the front
plane and same procedure you have to
repeat then next will be to create the
door so because I want to create
door here this door point 9 by 2 meter
height so for that again this door will
be on the right plane so we will take
from your right then sim then we will
create one rectangle rectangle give
first point then click on dimension the
length will be 0.9 and height will be 2
clicks then zoom it upset by 100.1
inside click the door click inside then
press Enter then again take the line
command take the midpoint to midpoint
enter then offset it by 100 on either
side again offset point one is already
there press ENTER select object take
your cursor up and click again select
object take your cursor down and click
enter then it is this line e enter
select enter when to trim you can also
use the TR as a shortcut press ENTER
select these two cutting edges press
Enter when you remove these two lines
press enter then again press pull it
press full take your cursor in the
corner take it inside
and give the depth of 0.05 50mm then
press Enter
again taking inside rectangle give the
depth of 0.05 enter then again below
rectangle 0.05 now I want we want to
gross now this is actually for this room
so on the inner side I want to keep it
plain and from outside I want to create
the grooves so what I will do I will
orbit it here is the door and then I
will click inside and give the depth of
0.025 enter again below select there
give the depth of 0.025 n cup so in this
way this door is created then if you
want you can give different color for
inner portion it can give different
color for inner portion this is skip
double helix give the color biscuit then
you now these are the three objects
different objects so we can combine it
by using solid Union command or you can
keep it as it is so that we can apply
different material for it so then we can
move it move select object enter then
select this surface midpoint
you
and you the point where you want to
suppose I want to keep it from so you
can view it from below zoom there and
place their sin this way this door has
been placed properly so same size of
doors are here also and here also so we
can copy the those those so just use
copy select object so I don't want this
wall so just hold down shift and click
on it enter then I will take this
midpoint and again I will orbit and see
it from the bottom and here I want to
place it at the mid of this this escape
to come out so in this way can peer
place those so from this door from these
doors suppose I want to create this door
also which is of 1 meter length using
this door only I want to create it
so at first I will have to rotate it so
I will just copy it copy select object
enter this point give the second point
take it outside
skip to come out it is this then to
rotate it select it and click on this 3d
rotate now I want to rotate as per blue
circle so click on this blue curve
circuit ok to make it horizontal take it
on the front side and click this face
escape now the size of this door is yes
sir
so I want to increase the size so for
that I can use the Driskill command so
just use principle click on this surface
so zoom it properly how was it violated
click there give the reaction and I will
increase hereby suppose point zero 550
on this side and 50 on that side click
on this side and increase by 0.05 scene
this is this one meter door is created
so I can move it or copy it copy select
object enter take this suppose midpoint
and put it here orbit it see it from the
bottom zoom and place there same will be
here also same this way this other
direction doors are also created so in
this way you can create the again maybe
lead is this this isometric
scene this way you can create you can
give other color to glass also just
double click on on on it then select the
color escape so in this way we can
create door and window
so we will stop here thank you