Design Softwares Exam > Design Softwares Videos > A complete Guide to AutoCAD (English) > AutoCAD 3D House Modeling Tutorial Beginner Basic - 3
AutoCAD 3D House Modeling Tutorial Beginner Basic - 3 Video Lecture - A
Text Transcript from Video
in this tutorial we will in continued
radius modeling and will create next set
of elements so now we are going to
create slab for slab at first we will
create one layer click on layer
properties
a new layer to name slab choose some
color
okay
then close it make this slab layer
current
and turn it on and make it current
and we want to put slab over this so at
first we will take at first we will be
putting in top lane so we will change
the plane to top
then we take polyline command polyline
we start from this point connect all the
external points
properly
then press ENTER to come out then copy
this line copy select this line now this
line cannot be selected so use a
crossing window and select the object
and to remove this 3d object hold shift
and click on this 3d object so it will
be removed and only line will be
selected then press Enter
give this point give the second point so
create a multiple copies so we are going
to create then parapet wall then
compound wall press escape and one more
thing will be footing below so we will
take one more for that escape to come
out then for slab
peaceful it peaceful
click give the height of 0.15 okay it is
not properly principal undo it
escape undo graceful
zoom it
and then because
which it is not getting properly faceful
so we can also use the extrude command
extrude select object enter then give
the height of 0.15 meter so slab is
ready then parapet wall support up for
parapet wall we will have to offset it
inside so choose OPSEC offset by 0.3
wall thickness select object click
inside same way for the length P length
actually we will have top set by 0.1
outside so select this an obsolete by
0.1 and then for compound wall we will
offset by 3 meter outside so select the
object give 3 meters 3 enter then again
we will offset it inside or we will
offset it inside by 0.3 so again select
this line going cell phone a point 3 is
already there just click then I skip to
come out then parapet wall again use
principle now it is again not getting
press full so we just try to explode it
sometimes polyline don't get extrude so
we will explode it
click on modify explode select the
object and enter then I can try to press
bullet okay now so you have to catch
that point so now it got highlighted
that means it can be Facebook click
there and give the height of point 75
then next will be this we just move it a
way so that it can be properly placed
put just move it so use move select
object enter take it at empty space then
zoom it then press full
you that point is where click there you
give the height of 1.5 skip so then this
is P length again we want actually
complete so we will use the extrude
command actually extrude select object
enter give the height of point six let's
skip to come out then we will place the
slab gives more command low select
object enters take this bottom point and
put it over the wall here end point
for parapet wall move select object
enter
pick the bottom end point put it over
the slab end point then for this P
length again move select object enter
then take this internal point and put it
below here so in this
this is created then for parapet wall
for compound wall I can move select
object
orbited Enter so we will take this point
actually this point will not be okay the
here it it can be catch so take this
point internal point and put it here
inside point so then it is all this
remaining object a enter select all end
up now here you will see that actually
compound wall is above the finland level
so we will move it down so for that use
move
select object enter then take this point
and give this as a second point escape
now we can see that it has been in line
that means it has been properly moved
[Music]
see this a compound wall
Phil lint level
has been created the next will be to
create steps here so we will need three
steps 1.6 so for creating those steps
suppose we will make the steps layer
current
steps and make it on also so here is a
steps layer make it on make it current
so actually we will not need this so we
will just here is it we enter remote
enter then to create steps so these
steps will be for to check the plane
click on s isometric so that those steps
will be on the plane parallel to this
surface that means it will be on the
this surface so when we take a symmetric
this surfaces right right plane so we'll
take it right so it is parallel to that
surface then we'll take line command
give first point make or thorn f8 then
go vertical by point 15 enter then go
horizontal in each direction by 0.23
enter then copy these three times copy
select object enter select the bottom as
a basement do top as the second point
make or for effect enter then one more
step so copied copy select object enter
above point give it at bottom point
enter and again connect the line make or
thorn press f8 drag the point
and click then press pull one metre
escape then move it again select object
take the above point as a base point and
give this as a second point synthesis
properly four steps are created then it
is this portion
then next will be to create the ground
so to create a ground choose a top view
top then create a rectangle take
rectangle come some work mode longer
away from the object click then convert
this into a region draw the region
select object enter then click on SI
symmetry so you can view this object and
you can give it some color which again
this object has been created above so we
can move it so for moving it we will say
move select object enter then give this
as a first point and this as the second
point so it has came down so now it is
properly visible so by doubling it we
can change the color
so we will grieve give it suppose green
color escape
so in this their ground is also created
then next will be actually this portion
is though if we give it we will just of
the slab layer so this is actually over
under position that means here openings
are required so those openings we will
create here so person enters from here
here is the veranda actually
so here openings are required so there
are those openings we will create now so
for that so I will so I will just change
its color it is very problematic for
five so I'm a soft on that okay
this kit then here I want to create the
opening so for that I will use the copy
H
okay slab latest owner so I can make
that layer on slab okay skip to come out
then I will look you for real it's not
copy edges select this edge enter give
the base point give the direction and
stop suppose point for you
the script again copy copy this is
interbase point direction
distance point for you again copy upward
line enter base wind direction is below
distance of 0.5
can copy from here now here it is giving
a area the three solid must be selected
it is happening because there is one
line is there because though it is not
it is a 2d line therefore it is not
copying it so what we can do so because
it is a three meter height we want it so
we will copy it from above enter this
one direction so we will give it two
point four you not copy which we will
try it again
copy H enter base point Direction
downward and distance of
point five
2.5 escaped so it is copied properly
then we will press put press pull it and
cut it press book click inside go inside
give point 3 thickness escape so this
has been cut though so same way we have
to cut on this side also CD it is this
line this was copied by mistake so same
procedure we will do here
so again copy H copy this line enter
basement Direction is inside so normally
it should be taken off at empty space so
that it will not take any other object
snap and it will not go anywhere at
other positions will take it point for
you again copy take the a bow line
the bass enter base point Direction 1/5
again copy take the bowline interbase
find direction below so it will be 2.5
exit exit now from follow from this side
so the internal we will just make the
slab off so we can measure internal and
for this we will give one layer and make
it out make it also off so ground
we will create one layer for ground new
layer ground give color ok
and make that ground layer also off then
close it
change the layer of this to ground
so skip okay
close the skip now here we can measure
which is the distance here so your di
QDI command to measure the distance from
here to here it is 2.45 so will be we
will make suppose a cut off one point
for you
that means from here it will be 2 so we
will again copy H this this line inter
base point direction to so it has been
copied then again press pull it place
one and cut it escape then we do not
need these lines so we can here is it so
for using it easily click on shaded and
choose to divide frame as a visual style
and here is it it is select all the
object
you
so you need to divide frame it is very
easy tweed is the object enter and I can
go back to shaded so in this case this
opening is created so here suppose you
want to play a play some rods for safety
so to create those rod I will create one
circle Center Point I will Q suppose
point two as a radius point 0 2 that is
20 mm and then press create so the
height we will measure what is the idea
so it will be actually point 5 point 3
that means 2 meter there is a space fill
it Chris full go inside
give height of 2 meter escape then move
it move select object enter select
quadrant on opposite side and place it
here then move it outside again
select object enter debasement suppose I
will move it by 0.15 then irate so that
all the pipes will be created for that
use rectangular array click on this pipe
enter so this rectangular is created so
here I want suppose I want one column I
want one column and rows so distance I
want 1.5 between the pipes one point
0.15 actual and then how many I want
that I will put some other one 15
[Music]
or 2023 okay it has been properly list
press escapes to come out and suppose
one more so in this way it has been
properly created the same way we can
create here also so we will copy this
pipe we will just copy this area suppose
copy see you enter select enter user
base point give the other point escape
then we will move it and place it there
no select object enter again we will
take the backside quadrant and place it
here at the mid of this then again we
want to move it outside of a pearl 0.15
so move select object enter base point
give the direction Oh point one five
then click this array
and now I want actually one row and I
want multiple columns so I want
suppose I want ten columns so it is and
distance between them is 0.15 so again
actually it has gone there so we will
move it on this side move select object
enter take this quadrant then orbit it
and place it here again move it by point
fifteen or we can keep it as it is so in
this way this veranda portion is also
created so it is this circle we will
make all the respective layers on layers
that is ground then
you
step six lab press escape soon this mess
portion is properly created so we will
stop here
you
radius modeling and will create next set
of elements so now we are going to
create slab for slab at first we will
create one layer click on layer
properties
a new layer to name slab choose some
color
okay
then close it make this slab layer
current
and turn it on and make it current
and we want to put slab over this so at
first we will take at first we will be
putting in top lane so we will change
the plane to top
then we take polyline command polyline
we start from this point connect all the
external points
properly
then press ENTER to come out then copy
this line copy select this line now this
line cannot be selected so use a
crossing window and select the object
and to remove this 3d object hold shift
and click on this 3d object so it will
be removed and only line will be
selected then press Enter
give this point give the second point so
create a multiple copies so we are going
to create then parapet wall then
compound wall press escape and one more
thing will be footing below so we will
take one more for that escape to come
out then for slab
peaceful it peaceful
click give the height of 0.15 okay it is
not properly principal undo it
escape undo graceful
zoom it
and then because
which it is not getting properly faceful
so we can also use the extrude command
extrude select object enter then give
the height of 0.15 meter so slab is
ready then parapet wall support up for
parapet wall we will have to offset it
inside so choose OPSEC offset by 0.3
wall thickness select object click
inside same way for the length P length
actually we will have top set by 0.1
outside so select this an obsolete by
0.1 and then for compound wall we will
offset by 3 meter outside so select the
object give 3 meters 3 enter then again
we will offset it inside or we will
offset it inside by 0.3 so again select
this line going cell phone a point 3 is
already there just click then I skip to
come out then parapet wall again use
principle now it is again not getting
press full so we just try to explode it
sometimes polyline don't get extrude so
we will explode it
click on modify explode select the
object and enter then I can try to press
bullet okay now so you have to catch
that point so now it got highlighted
that means it can be Facebook click
there and give the height of point 75
then next will be this we just move it a
way so that it can be properly placed
put just move it so use move select
object enter take it at empty space then
zoom it then press full
you that point is where click there you
give the height of 1.5 skip so then this
is P length again we want actually
complete so we will use the extrude
command actually extrude select object
enter give the height of point six let's
skip to come out then we will place the
slab gives more command low select
object enters take this bottom point and
put it over the wall here end point
for parapet wall move select object
enter
pick the bottom end point put it over
the slab end point then for this P
length again move select object enter
then take this internal point and put it
below here so in this
this is created then for parapet wall
for compound wall I can move select
object
orbited Enter so we will take this point
actually this point will not be okay the
here it it can be catch so take this
point internal point and put it here
inside point so then it is all this
remaining object a enter select all end
up now here you will see that actually
compound wall is above the finland level
so we will move it down so for that use
move
select object enter then take this point
and give this as a second point escape
now we can see that it has been in line
that means it has been properly moved
[Music]
see this a compound wall
Phil lint level
has been created the next will be to
create steps here so we will need three
steps 1.6 so for creating those steps
suppose we will make the steps layer
current
steps and make it on also so here is a
steps layer make it on make it current
so actually we will not need this so we
will just here is it we enter remote
enter then to create steps so these
steps will be for to check the plane
click on s isometric so that those steps
will be on the plane parallel to this
surface that means it will be on the
this surface so when we take a symmetric
this surfaces right right plane so we'll
take it right so it is parallel to that
surface then we'll take line command
give first point make or thorn f8 then
go vertical by point 15 enter then go
horizontal in each direction by 0.23
enter then copy these three times copy
select object enter select the bottom as
a basement do top as the second point
make or for effect enter then one more
step so copied copy select object enter
above point give it at bottom point
enter and again connect the line make or
thorn press f8 drag the point
and click then press pull one metre
escape then move it again select object
take the above point as a base point and
give this as a second point synthesis
properly four steps are created then it
is this portion
then next will be to create the ground
so to create a ground choose a top view
top then create a rectangle take
rectangle come some work mode longer
away from the object click then convert
this into a region draw the region
select object enter then click on SI
symmetry so you can view this object and
you can give it some color which again
this object has been created above so we
can move it so for moving it we will say
move select object enter then give this
as a first point and this as the second
point so it has came down so now it is
properly visible so by doubling it we
can change the color
so we will grieve give it suppose green
color escape
so in this their ground is also created
then next will be actually this portion
is though if we give it we will just of
the slab layer so this is actually over
under position that means here openings
are required so those openings we will
create here so person enters from here
here is the veranda actually
so here openings are required so there
are those openings we will create now so
for that so I will so I will just change
its color it is very problematic for
five so I'm a soft on that okay
this kit then here I want to create the
opening so for that I will use the copy
H
okay slab latest owner so I can make
that layer on slab okay skip to come out
then I will look you for real it's not
copy edges select this edge enter give
the base point give the direction and
stop suppose point for you
the script again copy copy this is
interbase point direction
distance point for you again copy upward
line enter base wind direction is below
distance of 0.5
can copy from here now here it is giving
a area the three solid must be selected
it is happening because there is one
line is there because though it is not
it is a 2d line therefore it is not
copying it so what we can do so because
it is a three meter height we want it so
we will copy it from above enter this
one direction so we will give it two
point four you not copy which we will
try it again
copy H enter base point Direction
downward and distance of
point five
2.5 escaped so it is copied properly
then we will press put press pull it and
cut it press book click inside go inside
give point 3 thickness escape so this
has been cut though so same way we have
to cut on this side also CD it is this
line this was copied by mistake so same
procedure we will do here
so again copy H copy this line enter
basement Direction is inside so normally
it should be taken off at empty space so
that it will not take any other object
snap and it will not go anywhere at
other positions will take it point for
you again copy take the a bow line
the bass enter base point Direction 1/5
again copy take the bowline interbase
find direction below so it will be 2.5
exit exit now from follow from this side
so the internal we will just make the
slab off so we can measure internal and
for this we will give one layer and make
it out make it also off so ground
we will create one layer for ground new
layer ground give color ok
and make that ground layer also off then
close it
change the layer of this to ground
so skip okay
close the skip now here we can measure
which is the distance here so your di
QDI command to measure the distance from
here to here it is 2.45 so will be we
will make suppose a cut off one point
for you
that means from here it will be 2 so we
will again copy H this this line inter
base point direction to so it has been
copied then again press pull it place
one and cut it escape then we do not
need these lines so we can here is it so
for using it easily click on shaded and
choose to divide frame as a visual style
and here is it it is select all the
object
you
so you need to divide frame it is very
easy tweed is the object enter and I can
go back to shaded so in this case this
opening is created so here suppose you
want to play a play some rods for safety
so to create those rod I will create one
circle Center Point I will Q suppose
point two as a radius point 0 2 that is
20 mm and then press create so the
height we will measure what is the idea
so it will be actually point 5 point 3
that means 2 meter there is a space fill
it Chris full go inside
give height of 2 meter escape then move
it move select object enter select
quadrant on opposite side and place it
here then move it outside again
select object enter debasement suppose I
will move it by 0.15 then irate so that
all the pipes will be created for that
use rectangular array click on this pipe
enter so this rectangular is created so
here I want suppose I want one column I
want one column and rows so distance I
want 1.5 between the pipes one point
0.15 actual and then how many I want
that I will put some other one 15
[Music]
or 2023 okay it has been properly list
press escapes to come out and suppose
one more so in this way it has been
properly created the same way we can
create here also so we will copy this
pipe we will just copy this area suppose
copy see you enter select enter user
base point give the other point escape
then we will move it and place it there
no select object enter again we will
take the backside quadrant and place it
here at the mid of this then again we
want to move it outside of a pearl 0.15
so move select object enter base point
give the direction Oh point one five
then click this array
and now I want actually one row and I
want multiple columns so I want
suppose I want ten columns so it is and
distance between them is 0.15 so again
actually it has gone there so we will
move it on this side move select object
enter take this quadrant then orbit it
and place it here again move it by point
fifteen or we can keep it as it is so in
this way this veranda portion is also
created so it is this circle we will
make all the respective layers on layers
that is ground then
you
step six lab press escape soon this mess
portion is properly created so we will
stop here
you
About this Video
4.95/5 Rating
Apr 18, 2026 Last updated
Related Exams
Video Description: AutoCAD 3D House Modeling Tutorial Beginner Basic - 3 for Design Softwares 2026 is part of A complete Guide to AutoCAD (English) preparation. The notes and questions for AutoCAD 3D House Modeling Tutorial Beginner Basic - 3 have been prepared according to the Design Softwares exam syllabus. Information about AutoCAD 3D House Modeling Tutorial Beginner Basic - 3 covers all important topics for Design Softwares 2026 Exam. Find important definitions, questions, notes, meanings, examples, exercises and tests below for AutoCAD 3D House Modeling Tutorial Beginner Basic - 3.
Introduction of AutoCAD 3D House Modeling Tutorial Beginner Basic - 3 in English is available as part of our A complete Guide to AutoCAD (English) for Design Softwares & AutoCAD 3D House Modeling Tutorial Beginner Basic - 3 in Hindi for A complete Guide to AutoCAD (English) course. Download more important topics related with notes, lectures and mock test series for Design Softwares Exam by signing up for free.
Description
Video: AutoCAD 3D House Modeling Tutorial Beginner Basic of A complete Guide to AutoCAD have been curated by the Design Softwares experts, helping you revise the topic quickly for exam preparation. Watch on EduRev.
Information about AutoCAD 3D House Modeling Tutorial Beginner Basic - 3
Here you can find the meaning of AutoCAD 3D House Modeling Tutorial Beginner Basic - 3 defined & explained in the simplest way possible. Besides explaining types of AutoCAD 3D House Modeling Tutorial Beginner Basic - 3 theory, EduRev gives you an ample number of questions to practice AutoCAD 3D House Modeling Tutorial Beginner Basic - 3 tests, examples and also practice Design Softwares tests.
Related Searches
Previous Year Questions with Solutions, Important questions, video lectures, AutoCAD 3D House Modeling Tutorial Beginner Basic - 3, AutoCAD 3D House Modeling Tutorial Beginner Basic - 3, MCQs, Viva Questions, Free, pdf , Extra Questions, past year papers, Sample Paper, study material, mock tests for examination, Exam, Summary, AutoCAD 3D House Modeling Tutorial Beginner Basic - 3, practice quizzes, ppt, Semester Notes, Objective type Questions, shortcuts and tricks;