AutoCAD Rectangle Command Tutorial Complete - Dimensions; Line Thickness;

we'll come back in this tutorial we will
learn about all the options available in
rectangle command so click on rectangle
so first option is you can create
apprehend rectangle give the first point
give the second point that is without
any dimensions and if I want to create
with rectangle with some dimension then
you have to take a rectangle command
give the first point then here is the
dimension option so click on dimension
option then specify the length how much
you want
suppose I want it to be 10 and specify
the width I want it to be file then you
have to define on which side you want
the other corner so you have to define
the sides side of the rectangle and
click there so rectangle will will be
created on that side then rectangle then
you can create a rectangle with chamfer
also so click on the chamfer option then
specify the first chamfer distance
suppose for you enter then second
chamfer distance is also for you then
give the first corner point then you
will have to make it somewhat larger so
that that chamfer will be shown and you
can make it free and or you can create
it using dimension also so in this way
you can create a rectangle with chamfer
same way you can create a rectangle
using fillet it also so for that click
on this filleted option then specify the
filleted value for you then specify the
first corner point and second corner
point or give the dimension same way
next is chamfer fill it with width also
if you need want some grid to the line
you can give width also give the width
suppose I want with to be 1 enter
and suppose I'd okay it will create with
fill it give the first point give the
second point so in this way you can
create a rectangle using giving
thickness width also so if I don't want
this fill it then infinite option you
have to click on the fill it option and
you have to use the radius to be zero so
that it will create a rectangle without
fill it otherwise it keeps on creating
with fill it then next option is so in
this way you can create using thickness
using width fill eight and chamfer
elevation and width that we'll see in
the last because it is related to 3d
then next is if I give again suppose I
make this width to be again 0 and I give
the first point then you can create
rectangle of a particular area also
suppose I want some area you Theory
option then specify the required area
how much area you want suppose I want
800 square unit so whatever is your unit
in that unit it will be created so it is
100 square unit so 100 enter then you
have to specify the length so was learnt
to be 10 so automatically a square is
created 10 by 10 square is created if
you check the area of this rectangle or
square area using object option select
so the area of the square is hundred so
in this week you can create a rectangle
using area option same way you can
create a rectangle using over a rotation
if suppose I want to create a rectangle
in some rotation give the give the
desire angle suppose I want it to be in
45 degree enter and then you can specify
the dimension or you can create it free
8 so in this way you can create using
rotation
also same way if you if you take this
elevation option if we use suppose
elevation and we specify elevation of 10
enter and suppose we create one
rectangle here first point I don't want
it to be rotational so in rotation angle
I will give 0 and I specify the second
point now where we can view that
elevation so for that you we will have
to go to 3d modeling click on 3d
modeling escape then click here on AC a
symmetry here if you are bit we can view
that our rectangle is at a height of 10
from xy-plane
so that is the elevation that is
elevation from xy-plane you we are
defining in that rectangle command same
way if occur again we will give a
rectangle command so now it has even
shifted here rectangle and if we give
some thickness that was IU thickness
suppose thicknesses of four you enter
then give the first point and second
point so your rectangle will be created
with thickness and if we see view the
visual it will change the visual style
so a surface is created actually so in
this way this rectangle is created at
elevation if we see the front view so
this rectangle is created at a elevation
obtained and this rectangle is created
at a elevation obtained with thickness
of fire so in this way if we want to
come back click on top view so in this
way you can create rectangle in
different ways or using all the
available options so thanks for giving
we will stop here