AutoCAD Rotate Command Tutorial Complete - Reference Angle; to Match Line;

in this tutorial we will learnabout
rotate command in detail keyboard
shortcut for rotate command is our o
enter then select the object you can
select as many object as you want then
once object selection is done press
Enter then you will have to specify base
point I want to rotate about this
midpoint give the base point about which
you want to rotate then I will just make
the earth off then you will have to
specify the angle between the two object
I want 60 degree enter your object will
will be rotated in anti-clockwise
direction and it will be at a 60 degree
from the original object to give the
rotate command from ribbon here is the
rotate command click there select the
object inter specify the base point and
if you want to rotate in clockwise
direction then give minus minus 45 enter
so it will rotate in 45 degree in
clockwise direction from the original
object again rotate select object enter
give the base point then next option is
copy while rotating if you want to
create the copy click on this option
claw copy then specify the rotation
angle suppose it is 45 degree enter so
it will create the copy of the original
object then next is rotate select object
enter give the base point
next option is reference if you want to
rotate in absolute angle then you can
use this reference click on the
reference then specify the reference
angle so this is this will be my
reference angle this mid point and the
second point then specify the your
required angle not the angle between the
two object but what angle you want I
want 120 degree
it will rotate in 120 degree from x-axis
and it is not depend on the previous
object's rotation angle reference of
option can also be used to align the
object with a with other object I have
this line I don't want the angle of this
line and I want to align this line with
this line click on rotate select the
object enter you the base point then
click on reference click on the
reference angle first point second point
then specify the new angle just click on
the endpoint of this line it will make
the object to align with that line this
is the one case where the base point is
same for this line and this object also
one other case is here the best friend
is not same I will just copy this object
now in this case I want to rotate this
object to align with this line but the
base point is not same in such case how
to use it click on rotate select the
object enter give the base point make
ortho off then click on reference give
the reference angle first point second
point then click on this point if the
base point is not same as your required
object then click on these points and
click on two points of this other object
so it will align that object with the
other object that's all thanks for
watching we will stop here