AutoCAD Copy Command Tutorial Complete | With Base Point; Multiple; Displacement; Single; Array; Fit Video Lecture | A complete Guide to AutoCAD (English) - Design Softwares

in this tutorial we will learn:about
copy command in detail keyboard shortcut
for copy command is co enter then select
object you can select as many object you
want once done press ENTER then specify
the base point in this case I want to
copy this circle to place its Center to
the endpoint of this line therefore the
center of this circle will become the
basement for this copy command click on
the centre make the ortho off then give
the second point where you want to copy
at the end of this line copy command is
still on you can copy it as many times
as you want
press ENTER to stop the command if you
want to give the copy command from
ribbon bar here is the copy command
click there then select object enter
then give the base point then give the
direction you can also specify the
distance and the angle here you can give
the distance suppose I want distance of
10 then to give the angle press tab
button on keyboard and specify the angle
I want to copy it in 135 degree enter
and press ENTER to come out so in this
way you can copy it
center-to-center so distance is 10 and
angle is 135 degree again copy select
object enter give the base point then if
you want to copy straight in straight
line you can track the object or you can
make the ortho on then give the
direction where you want to go and
specify the distance directly I want to
copy at a distance of 15 or here on
upper side at a distance of 10 in this
way also you can copy it then in copy
command there is a option is there if
you click on the array you can specify
the number of atoms how many item you
want I want for your atoms enter then
specify the second point or the gap
between the atoms suppose I want the gap
to be for you enter so it has created a
array in that direction if I take the
area option again array then give the
number of atoms for you then in array
atom there is one more option is fit
option that means you can specify the
total distance within which you want to
fit the five objects click on the fit
then specify the total distance I want
to fit the for you object in twenty five
distance give the twenty five distance
if you want to cancel the last operation
you can click on undo here so it will
cancel the last operations and by
clicking on exit you can come out again
copy select object enter then there is
this displacement option is there if you
click on the displacement you need not
to give the base point you can directly
specify the distance make the earth off
so in displacement you will have to use
the distance in X direction and y
direction suppose here argue X the X as
a ten comma and a y as a ten enter so in
this case if we check the distances from
the center
this Center the x-direction distance is
10 and y-direction distance is 10 then
again copy select object enter again
displacement then if you want to give
angle distance and angle that is also
possible your distance of 50 then to
give the angle you have to press the tab
button and give the angle suppose 30
degree enter so here if we check the
distance measure from this center point
to this center point the distance is 50
and angle is 30 copy select object enter
then there is one more option is mode
option if you click on it mode then you
can choose the copy mode whether you
want to copy it multiple times or a
single time if you choose single give
the best friend give the second print
copy will operate only one time again
copy select object enter then again mode
and if you choose the multiple it will
operate multiple times use the base
point and second point so you can copy
it as many time as you want again copy
select object enter give the base point
then there is one more option is here
use first point as displacement that
means it will use this point whatever
the distance from this origin with the
same distance and same angle it will
copy ahead to use this first point as
displacement option you just have to
press ENTER so it will directly copy
whatever is the gap here thus with the
same gap it it have copied here then
again copy select object enter when you
are in inside the single copy mode
within that if you want to copy multiple
times from here you can choose the
multiple times multiple times then give
the base point
within single option also you can copy
multiple times presenter to come out if
the base point is not important
in copy you can copy without command
also select the object press right click
and drag the mouse and release the right
click and click on this copy here so in
this way you can copy without giving any
command also select the object then
press right click and drag the mouse and
release the mouse and copy here in the
same way you can move also select the
object press right click drag release
the mouse and move here thanks for
watching
we will stop here