AutoCAD Stretch Command Tutorial Complete - Stretch Multiple Lines; Horizontally;

in this tutorial we will learn about
stretch command keyboard shortcut for
stretch command ease is enter then
select the object there is a condition
for selection select object to stretch
by crossing window or crossing polygon
that means if you want to select the
object you will have to click on the
right side and take your cursor on the
left side then a crossing window will
appear the object to be stretched are to
be covered partially and object to be
mood or to be covered fully that means
the object the complete object inside
the window our mood and the object cover
partially I will be stretched give the
second point then enter give the base
point do the direction where you want to
go and give the distance suppose I want
to go by 10 enter so it will stretch it
by 10 distance from ribbon here is the
stretch command click on it then again
click the first point of crossing window
click the second point then enter then
there is displacement option click on it
displacement then you will have to
specify that distance in x and y
direction here I want to go in X
direction by distance obtain give the 10
then give the comma in y direction I
want to go by 0 distance gives us 0
press Enter so it will stretch it by
distance of 10 in x direction say me if
I want to stretch in y direction stretch
select object use the crossing window
enter select the displacement option and
then give for X 0 comma 4 y 10 enter so
it will stretch in y direction if you
want to increase the side on the
opposite side on this side then give the
distance in - stretch select object and
click on displacement and use the
distance in - 10 comma 0 enter so it
will extrude in other side if you value
in - if you want to stretch multiple
lines for that you the stretch select
again click on the right side take your
cursor on the left side in that case you
will have to partially cover the lines
and the points to be moved
should come inside the window then enter
give the base point give the direction
you can give the distance or you can
track the point up to this end point
click there so in this way you can
stretch multiple lines if you want to
stretch multiple objects at the same
time for that you will have to give em
stretch command name stretch enter then
select the multiple object using
crossing window I want to stretch all
the three objects enter give the base
point give the direction and give the
distance so it will stretch all the
three objects or multiple objects thus
all thanks for watching
we will stop