AutoCAD 3D Extrude Command Tutorial Complete - Surface; Solid; Along Path;

in this tutorial we will learn extra
command to switch to 3d modeling click
here and select 3d modeling and click on
unsaved view is a symmetric then you UCS
icon command enter no region click here
and select shaded with edges for extrude
at first you will have to create one
close sketch using line we will create
one sketch
[Music]
we will keep a copy of it keyboard
shortcut 4x2 DS ext enter then select
the object to extrude enter give the
direction where you want to go and give
the height as the lines we are not
connected or not a single object
therefore it has created a surface model
if you want to create 3d solid model
then this lines needs to be connected to
connect this line you can use the join
command click on modify and click on
join and select all the object and enter
so this object will be converted into a
single object now if you extrude it it
will create a 3d solid object to give
you extra command click here extrude
select the object to extrude enter give
the direction where you want to go and
then give the height how much you want
suppose I want it to be for doing
extrude you can also give the taper
angle extrude select object enter click
on this taper angle and give the angles
I will give you a tip angle 10 degree
enter then give the direction a night
for extrude you can also give the
direction as for other object click on
extrude select the object to extrude
enter then click on this direction
suppose I want to extrude as per the
diagonal of this rectangle therefore I
will click this as a first point and
this as a second point so it will
extrude as per that and if you want to
create some object some reference line
yourself then that reference line should
be on a plane normal to the your sketch
Direction line should not fall on the
surface that is parallel to this surface
we will create that direction line on
the Z Y plane for that we will take this
right plane then create a one line use
the first point then give the length
suppose length is 50 and angle XT was
partly there enter enter and again
extrude select object enter when you are
giving direction if you want to change
the taper angle also click on this taper
angle give the taper angles
was fired agree enter and for I'd give
the direction click this first point
click this second point so you can
combine both taper angle and direction
then you can create our extrude using
path also we'll create some reference
path
then we will apply some Filat relate
then set the radius how much you want
and click on the first line in second
line now I want to extrude as per this
path now this path is again a separate
line so we will have to convert it into
single object using join command click
on modify joined select the object enter
and on this path what shape you want to
extrude that we will create on the top
plane select the top plane and create
the shape so once again I will take one
rectangle from this endpoint and I want
to extrude it on this path click on
extrude select the object to extrude
ENTER then click on this path and select
this path if your sketch is close and
still if you want to create the surface
model then for that give extrude select
the object then you will have to select
this mode option from this mode option
you can define whether you want solid
model or surface suppose I want it to be
surface model give the direction and
give the right in this way you can
create a surface model using closed
sketch also that's all thanks for
watching we will stop here