AutoCAD 3D Loft Command Tutorial Complete | AutoCAD Loft Path | AutoCAD Loft Guides Video Lecture | A complete Guide to AutoCAD (English) - Design Softwares

in this tutorial we will learn all the
options available in lock command at
first we will create some profiles which
can be used for lot I will create one
polygon click here select the polygon
give the number of sides give the center
point
give the method I will use inscribe give
the radius how much you want enter then
I will create one circle at the center
click the point and give the center
point of the radius and I will create
one rectangle
then click here and switch to 3d
modeling click on 3d modeling then click
on this unsaved view and select AC
isometric then to move this X Y Z icon
give the UCS icon command yes icon enter
choose the no region click on this 2d
wireframe click on shaded then move this
flow file then give them muqam on em
enter then select the profile I will
choose this circle enter give the base
point give the direction make our zone
give the direction and give the distance
say me again enter select this row file
enter give the base point and give the
direction and give the right then we
will keep them copy of this object to
try one more method give the co enter
select the object enter give the base
point make ortho and keep it on the side
this is skip then you can you loft
command from here click here and select
loft
then select the cross-sections you want
to connect by loft then press ENTER then
we want to connect this cross-section
only click on this cross-section in loft
you can connect multiple profile and if
you change the sequence of selection for
loft it will create different object
again I will click on loft
then select the cross-section I want to
connect this with this one and again I
want to connect this with this one then
press the enter select the cross-section
so here it has created a different
object in this way you can change the
sequence also and as for that it will
create the object front lock in same way
you can create loft on some path also I
want to create some path on this zy
plane I will change the plane to right
so X Y will become vertical then I will
create one path using line comma give
the first point make also on
give the second point give the third
point then press escape then fellate
these two lines click on fill it give
the radius I want to you this 35 enter
then select the first line select the
second line then for path these object
needs to be connected further to use the
joint command click on this modify click
on join select all the object enter now
this object is connected and become a
single object press escape then create
one profile below again I want to create
one rectangular profile click on this
rectangle give the first point now I
want profile to be horizontal on top
plane select here and click on this top
click on this rectangle give the first
point give the second point then move
this rectangle give em enter select this
rectangle enter give the base point I
want the center of this rectangle at the
end point of this line drag this
midpoint take your cursor to midpoint
don't click there and take your cursor
at the center it will track it and give
the center point then put it on this end
point of this line then again I want to
create one profile here so this profile
will come on this head explain for ZX
plane click here and select the front
then create one circle here give the
circle command C enter give the end
point and give the radius how much you
want then I need this object for other
option also
the copy command co enter select the
object enter then make or Thorne and
keep one copy our race escape then
connect this object using loft click on
Lord select the cross section this one
to be connected with this one then press
enter then I want to connect this on
this path click on this path option
select the path make the grid off and if
you want to make this Hollow then click
on the shell here select the 3d solid
then click on this face to be remove his
face and bottom face enter give the
thickness suppose it is 1 enter and
escape here is hollow part is created
then one more option is guide curves
here I want one rectangular profile if
the erase command e enter select the
circle enter create one rectangle here
then move this rectangle M enter select
the object enter then drag the midpoints
give this as a base point view this as a
second point then I want to connect this
to profile on some path now this path
will be on this Y Z plane so I will
change the plane to right then I want to
create path using polyline click on this
polyline give the first point give the
second third and fourth point enter
again one more polyline here enter give
the start point second point and third
point enter
then this polyline I need to be in
spline shape click on this polyline then
right click click here and select the
spline fit so this polyline will be
converted into a spline I can select
this polyline right click click here on
polyline and click on this spline fit
then again click on loft
then select the cross-section this one
to be connected with this one enter then
I want to connect as per these guide
curls click on these guides select this
guide curve and select this guide curve
and press Enter
so this object is created using guide
curves thanks for watching we will stop
here