AutoCAD 3D Practice Drawing for Loft Command | AutoCAD 3D Mechanical Drawing | Bottle & Screw Driver Video Lecture | A complete Guide to AutoCAD (English) - Design Softwares

in this tutorial we will create this
bottle and screwdriver it start with
water this bottle we are going to make
using logged command there is this
square of 40 size and this circular
section is of diet 20 and these are the
height for the sections at first we will
create this square of 40 dimension
take the rectangle comer give the first
point click on dimensions give the
length of 40 enter and width of 40 enter
and click there
then zoom all Z enter a enter to ship
this XY if the UCS icon command no reach
and next is this circle of daya 20 take
the circle command
like the midpoint and give the center
part and give the radius of 10 then
switch to 3d modeling click here and
select 3d modeling and click here and
select AC isometric click on this 2d
wireframe and select shaded zoom - we
will have to make the copy of this
sphere at a height of 60 take the copy
command select the object enter give the
base find make ortho on give the
direction give the height of 60 enter
enter then next will be this circle a
circle is at a height of 90 and 130
again take the copy select the object
enter give the best friend give the
direction give the height of 90
winter and I can give the height of 130
enter then enter then here is the circle
II enter select this circle enter all
these sections are copied at desired
locations and then convert this into a
bottle click here and select lock come
on
then select the cross-section in locking
order this square to be connected to
this square and this square to be
connected to this circle in this circle
to be connected to this circle then
press enter then click on this
cross-section only now we don't want
this curvature we want it to be straight
click on the object and click here and
select a rule and press this it becomes
straight the next requirement is the
fill it up radius for you at all the
four corners for that give the fill
eight command select the line this
vertical line and give the radius of
five enter and select all the remaining
lines and orbit it and select lines on
the other side also and press enter.this
fill it is applied and next is this fill
eight of radius 15 here again select
fill it select this circular portion
radius of 15 enter and select all the
other arcs orbit it and select from
opposite side enter then zoom fit then
next is this bottle is hollow and
thickness is 1 mm to make it how long
use the shell comment from here click on
shell select 3d solid select faces to
remove this one enter gives us a lobster
distance of 1 enter NS skip it is the
water deeds
ready then click on new start neutering
and next is this screwdriver the
parameters of this screwdriver are in
inch at first we will change the unit to
inch for that give the u.n enter and
from your select engineering and click
on OK
at first we will create this handle this
handle can be created easily using Raval
command at first we will have to create
this profile the length of this line is
6 point for you this is point 70 for you
this is also point 75 at first click on
this unsaved you take a cemetry give you
UCS icon command you click on no region
and take the line command then give the
first point maegor thorn give the
direction your the distance of point 75
didn't give direction again point 75
again give direction on this side
give your 6.4 you
enter the noggin point 75 from this line
to Center is one point for you and from
this point to this point is point 75
that means this point to this point is
point 75 same way from Center to up to
this point will be point 75
that means this total length will be one
friend for you plus point 75 one print
for you plus point 75 at is 2.25 and -
this 6.4 you - six point for you that is
4.25 so the length of this line will be
4.25 create the line of 4.25 enter and
then here we will have to apply radius
of point seventh if I take the Filat
command click on radius give the radius
of point 75 enter and then select first
lines like second line the next is to
create this arc of radius one now for
this arc here we have the start point we
have the end point and we have the
radius
therefore we will use start end and
radius option click here and select this
third end radius give the start point
give the end point gives the radius of
one enter this portion is ready now for
revolve command we will need it to be
connected for that click on this modify
click on join then connect all the
Porsche press Enter now this is
connected properly and click here and
select revolve
click on this object or you all enter
exa start mine this one access endpoint
this one and gives a angle of 360 degree
then click on this wireframe select
shaded make read off then next is this
rod the length of this rod will be 7
minus this 2 that is for you and the
diameter is point for you we will need
to create one circle on this surface for
that we will change the plane click here
and select the front
and take the circle command give the
center point Center point will be the
center of this existing circle and give
the radius of point 25 and press full it
graceful click inside give the length of
fire then I skip then next is this
portion now for this portion there is
this rectangle of point forever point
one we will create that at first take
the rectangle command give it the first
point click on dimension give the length
of point for you and width of point one
then click there now this profile is
created with a point one opposite to the
tip that means we will have to offset
this profile by 0.1 outside for that you
the opposite comer you the obser
distance of point one shallick this row
file click outside Enter
then one more profile is required that
is this circle of point for you diameter
take the circle command then drag the
mid points look at the center then give
the radius of point 25 now this row
files are at a gap of 1 move them click
on new select this profile enter you the
base point give the direction you the
distance of 1 enter select this circle
and get the base point give the
direction distance of 2 then this needs
to be connected with loft command give
the loft command from here select the
profiles then enter click on this
cross-section only then move this
profile click on select object enter
then best friend will be the center of
this circle and second point will be the
center of this circle you can connect
all of them using Union command select
solid Union select all the object and
press Enter
that's all thanks for watching
we'll stop here