AutoCAD 2016 Tutorial for Beginners - 1 (Part 2 of 2) Video Lecture - A

suppose if I want to create a line from
this point if I want to define the angle
on the upper side of x-axis then you
will have to take your cursor Abu and if
you want to specify the angle on the
lower side then you will have to take
your cursor down sofas on upper side I
want a line of 50 distance then to
specify the angle you will have to press
the tab button press the tab button for
angle and here the angles suppose I want
to go in 30 degree then give your 33
Center again suppose I want to go on the
left side at first you will have to
specify the angle then press the tab
button when specifying your angle
you always have to spare attention to
this dotted arc that exactly shows the
angle you have to specify that means
right now if I want to go on this left
side and I want to go 30 degree I heard
of this 90 degree then I don't have to
use the 30 degree if I use a 30 degree
angle it line will come like this but if
I want to go on this side with 30 degree
ahead of this 90 degree then I will have
to specify 120 degree then only this
line will go on this side and when I
could take the cursor down the angle
automatically is major from the bottom
side then specify the length place the
time now here suppose from this 180
degree I want to come down by 30 degree
that means I will have to specify this
total angle of 180 minus 30 that is 150
degree and press Enter then you can
close from here I will just remove this
object
so because I have this one line from
this point to this point if you want to
ship this XY on the left side then give
the UCS icon come on UCS icon enter and
choose the no regen option it will
always remain on the left side and it
will not come inside your screen suppose
I have one more line here
I want to create one line from this
point to this point and take the line
come on and take your cursor near this
point it will show in print this is
called as object snap using this object
snap you can create the ring very
accurately and from the point required
by in order to show this object snap you
will have to keep this object snap mode
on if this object snap mode is off then
it will not show any object snap from
here by clicking on it you can make the
object snap on then only it will show
them object snaps then click on the
point then make the earth war then give
the same point then suppose I want to
create a line up to this midpoint when
you take your cursor near the midpoint
it will automatically show the way to
point objects if in your case it is not
showing the midpoint then you will have
to turn it on click on this arrow here
and select this midpoint object snap
then it will show it automatically when
you install AutoCAD first time this
midpoint object snap is off by default
so from here you will have to make it
all then only it will show the midpoint
of sixth then select the mid find again
in point again in point then now it is
again showing the midpoint but I don't
want to connect the line to the midpoint
but I want this line to be perpendicular
to this line
now it is showing the midpoint of this
nap but I need perpendicular objects lap
in such cases to select the objects nap
manually press shift button and rightly
and it will show the list of all the
objects from here you can select your
desired objects nap suppose I want it to
be perpendicular click on this
perpendicular then click on the line it
will create the line perpendicular to
that object then to stop the line
command in between press ENTER it will
stop the line command then if you want
to create circles here is the circle
command center radius keyboard shortcut
for circle it's C ENTER click here then
he is asking for specify center point he
gives the center point then gives a
radius it will create circle of that
much radius
again circle give the center point then
give the radius inter as it has
displayed endpoint midpoint object snaps
same way for circle it will show
quadrant objects nobuta matically so you
can create the drawing using the
quadrant points it will show the
quadrant objects snap when you take your
cursor to the center it will show the
center or jig snap same way suppose I
want to create line from this point now
it is showing the quadrant objects now
but I don't want to connect the line to
the quadrant but I want my line to be
tangent to this circle to choose the
tangent object snap press shift right
click and select the tangent object snap
from here then click on the circle then
press enter it will create line tangent
to this circle and if you make any
mistake and if you want to undo from
here you can undo you can also undo by
giving you enter or giving controls it
click on undo it will cancel the last
command and if you want to cancel the
undo and redo it from here you can redo
it keyboard shortcut for you do is
control Y and you will have to do that
you do immediately without doing any
work otherwise it will not redo click on
that you do it will bring and the object
that you undone if you want to save this
dry click here on save then select the
folder and give the name to the dry and
click on save if you want to close this
drawing click here it will close the
ring and bring back you to the original
interface now here recent documents are
shown if you want to reopen this drawing
by clicking here you can open it and if
you want to open the older document by
clicking on this open files you can
choose the files that you want to open
and click on
you can also start the new drink by
clicking on this plus sign it will start
neutering automatically that's all
thanks for watching we will stop here