AutoCAD 2017 3D Dimensioning Tutorial Video Lecture | A complete Guide to AutoCAD (English) - Design Softwares

the next will be to give the dimension
right now we are on the surface
therefore at first we will give
dimension on this side
is 17550 32 32 25
click on I noted at first change your
dimension style to annotative click here
and select annotative
and click on dimension click on ok you
first friend give the second point give
the location now text is not properly
visible recess skip and increase the
scale from here before that if your this
option is not on at scale to eneter to
object make it on then change the scale
now it is rapidly visible then we will
make some settings click here for
dimension style
modify then click on text make it double
select iso standard in feet click on
this drawer dim line between extension
line primary units select precision of 0
click on ok clothes it is properly sure
then next is this 32 we can click on
dimension select the first point then
drag this point and drag this point like
this to point at this point and this
point here it is showing the
intersection give the location
then same with your dimension here first
point then crack this point the same
point and the same point go inside
was it track the points click there and
take your cursor down and click there
then escape our tracking is not shown
properly we will switch to hidden mode
so that it will show the tracking
properly then next is to give the 50
here click on annotate dimension now
here quadrant is not shown click here
and make the quadrant objects Nepal
click outside and take your cursor here
now it is showing the cotton take this
quadrant point and this quadrant point
take your cursor below and click there
escape then to give this dimension up 25
again click on home here and choose face
option and select this face and enter it
gives a dimension click on annotate we
will give the diameter click here and
select diameter
select this arc take your cursor inside
and click there next is to view
dimension on this face
for that click on home click here and
select the face option again select this
face enter
and cuter dementia
click on annotate
mention select this first point select
the center point and give the distance
of 25 here same way again select this
midpoint select the center point and
give the distance of 60 escape then
select this diameter and give the
diameter
biscuit then we will give these 28
distance
click on home click here and select the
face option select this face enter
click on annotate take the dimension
give the Centrepointe orbit 8 select
this midpoint take your cursor outside
click there
then this radius of 9
take the radius command select our take
your cursor inside and click
then on the surface click on home click
here and click on this face option
select this face enter and again click
on annotate click on this dimension
click on the midpoint this midpoint and
this midpoint and click here now here
actually 9 distance is coming reverse
actually we need it up
again click on home click on face select
this face and click on flip X we want
there to be outside click on flip
y ou X is below and Z it is offset press
ENTER then click on annotate click here
and select linear like this midpoint
this midpoint give the location or line
is shown properly same way on this side
linear first point second point location
and 32 same linear this point first
print second point third point to ship
this we need to be on this surface
click on home click on face like this
face enter click on these dimensions
like this grip orbit it select this grip
and take it inside the skip click on is
asymmetric
then this drill we want to give it on
the top of this plane for that we have
to switch our plane to this top now as
this is a curvature we cannot use the
phase option for that we will use the
UCS option click on home then click this
3.0 UCS pay for it now give the new
region point will be this one X
Direction is this one y direction is
this one
now we will give the dimension click on
annotate click on linear select the
first point second point location is
their only T showing the 12 again same
here first point second friend location
where all the dimension has been given
click on home click on shaded and if you
want to you color to the object double
click on it and select the desired color
when trace escaped that's all thanks for
watching we will stop here