AutoCAD 3D Dimensioning in Paper Space Video Lecture - A complete Guide

at first we will create one 3d object
click here and select 3d modeling close
this then click here and select AC
isometric then to shift this give UCS
icon comer ETS icon enter no region then
we will create one queue obtain size
click on box you the first corner point
take your cursor away you have the
length of 10 tab 10 enter give the
height of 10 enter zoom fit and will
create one cylinder on the top for that
click here and select cylinder option
just orbit a bit click the point and
look at the center points you the radius
of 5 you die top 10 enter zoom fit then
we will create one cylinder on this
surface to change the plane click on
view click here and select write plane
you can click on home select cylinder
give the center point with the radius of
5 you take your cursor inside give the
depth of fire then we will merge this
object using Union click on Union select
all the object enter then in layout i
want the view to be hidden click here
and select 3 degree done then before
creating dimension please ensure that
you have selected any isometric view
suppose from here I will select a CA
isometric
if you take views other than isometric
views suppose if you orbit and adjust
the view then dimensions will be wrong
therefore ensure that you take any one
of the this for isometric views then
only dimensions will come correct and
click on layout then we want to hide
this rectangle for that we will create
one layer give the layer command L a
enter
create new layer will keep the name as
layer 1 then we will freeze this layer
click here to freeze the layer then
close this give the properties command
PR enter then select this rectangle and
from here you can change the layer to
layer 1 click on clothes and close this
also
now that frame is not visible then we
will give the dimension 4 dimensions
like on a note 8 click here and select
the line as we are going to give the
dimension 4 inclined line therefore we
will select a line here then give the
first point give the second point give
the location
then enter again for this line enter for
this line now as we know the distance
was stained but here it is showing
different distance to show the train
distance we will have to work out one
scale factor that we will have to set in
dimension style here we will have to
increase the scale the original length
here is 10 and now it is eight point one
six five so to work out the scale factor
we will have to divide the tale by this
value so that we will get the scale
factor we will work out the scale factor
your skill factor will be ten divided by
eight point one six five enter this is
the scale factor
click on edit copy click outside then to
set this scale factor click here on
dimensional style click on modify click
on primary units and here you will have
to defend the scale factor in
measurement scale scale factor I click
here and paste the scale then this scale
is applicable only for layout therefore
you can take here also apply to layout
damages only then click on OK click on
clothes now it is showing the ten
properly then we don't need these four
zeros and we want to do some settings
also for that again we will go to
dimension style modify then in text we
will choose a bow I want I also standard
then in primer units I want single zero
okay loads then we will have to align
this extension line with this line to
align the dimensions you will have to
use the isometric drawing concept now
this is isometric view and if we draw
here a horizontal line this angle will
be 30 degree and this angle will be 30
degree that means deals line will be at
a angle of 30 degree this will be at a
90 degree and this line will be at angle
of 150 that is 180 minus this 30
therefore to align this extension line
with this line you will have to you
oblique angle of 150 degree to align
this dimension click on dimension select
oblique select the dimension to align
now this line will be aligned with this
line same way for this dimension also
this line will be aligned with this line
you can also select this dimension enter
your the oblique angle of 150 enter now
here one problem has happened this has
been aligned properly but this is not
aligned properly we just undo it you
will have to take one more care while
aligning the dimensions click on the
model this is your psyche on needs to be
word right now it is in right plane we
need it to be in the word to change it
to word click on view and from here
choose the world then only that oblique
angle concept will work then click on
layout again
again click on annotate select here and
click on oblique then select this board
dimension enter then give the oblique
angle of 150 enter now it is properly
aligned again ugly select this dimension
enter now this extension line needs to
be aligned with this line this line is
at 30 degree give the oblique angle of
30 degree then we can also try one more
dimension here for this line suppose we
will give one more dimension align first
point second point location
and to align this line with this line we
will have to give the oblique angle of
90 click on dimensions of length select
this dimension enter to the oblique
angle of
then to give this radius dimension you
will have to use multileader click on
multileader i want to catch some point
here for that i will shift right click
and will choose this nearest option
click this nearest point take your
cursor away click there and i will type
here our i will make it caps lock our
feiyu and click outside and if you want
to show the line between take the line
command L enter and take your cursor on
the circle to show the center point from
the center to this endpoint let's skip
same way you can your radius for this
also leader shift right-click nearest
take the nearest friend take your cursor
away click type RFI you click outside
then create one line L enter from this
point Center Point escape then zoom
extend that's all in this way you can
give dimensions in layout for three
object thanks for watching we will stop
here