AutoCAD 2017 Isometric Drawing Tutorial Video Lecture - A complete Guide

in this tutorial we will create this
object in isometric to switch to
isometric click here
in this object at first we will create
these base circles now these base
circles are on horizontal plane or top
plane we can change the plane by
clicking on this arrow and choose iso
plane top so your plane will become
horizontal then we will create this
circle of 42 diameter that is 21 radius
to create isometric circle click here
and choose axis and option then select
the ISO circle give the center point
give the radius of 21 enter in zoom all
Z enter a enter zoom - then ship this XY
UCS icon give the UCS icon command enter
choose no region then this other circle
of radius 32 that is 64 diameter is at a
gap of hundred will create one line from
the center of this make ortho on give
the direction give the distance of 100
enter enter then I can create one eye so
circle here
of 32 radius choose this axis end option
select ISO circle give the center point
give the radius of 32 enter then we need
to create an Junt lines here for that
choose the line command press shift
right click and choose tangent and take
your cursor near the circle now actually
we need this tangent somewhere here but
it is showing here we will choose this
point and create one tangent accord off
again shift right click and tangent and
click here press Enter now this is not
the correct tangent again we will use
the line command shift right click
tangent and choose somewhere here range
shift right click tangent the other
point here enter then we will erase the
internal line give e enter it is this
line and zoom fit semi on the
side with the line command ship tight
Lake tangent now it is showing point
somewhere here suppose we will try look
at this point
shift right Lake tangent here enter now
this point is also not correct again I
didn't give the line command
separately tangent then take this upper
point then shift right Lake tangent
click on this circle enter it is this
internal line II inter inter this bottom
ship is ready then here is the thickness
is drill will copy the shape at the gap
of 12 give the copy command copy select
object enter give the base point make
ortho on now it is going horizontal we
want to go vertical for that we will
have to choose the ISO plane from here I
will choose ISO plane right go up give
the height of 12 enter enter then
connect lines here give the line command
connect from quadrant of this to the
quadrant of this enter I can enter from
quadrant of this two quadrant of this
inter then we don't want internal
portion we can't trim the unwanted
portion for that give the trim command
press ENTER then remove the unwanted
Porsche enter and it is the remaining
object II enter and it is it then here
also trim T are enter enter and enter so
here also PR enter enter remove so the
next will be this circle will be at the
height of 24 that is from this point it
will be a diet of 12 and here
the circle will be I tied up 24 that is
36 - drill we can copy these two circles
Abu copy select this circle enter give
the base point give the direction
give the gap of 12 enter enter again
enter select this circle enter give the
base point give the direction give the
height of 24 enter enter and I can
create vertical lines quadrant two
quadrant from this quadrant to this
quadrant enter I can enter from this
quadrant to this endpoint enter begin on
these sides enter from this quadrant to
this quadrant enter then again remove
the unwanted portion trim it you the TR
enter enter
and Timlin wanted portion so that it
will show our desired shape
now here also one quadrant two quadrant
aligned is needed then here is this
create one quadrant two quadrant line
line from this quadrant to this quadrant
enter trim it TR enter enter and remove
the unwanted portion then this arc is
also not needed we can trim it now PR
enter enter and trim it and this is also
not needed
TR enter enter enter the next will be
this rib this rib is starting from this
point to this point we will have to look
at this point by creating one line from
the center of this circle take the line
command give the center point and
bracket if at your end it is not
tracking in angle then for that you will
have to make some settings click here on
polar tracking arrow and select this
tracking setting you will have to take
here track using all polar angle
settings and here you will have to use
the increment angle of 30 then only it
will track in inclined direction as per
our requirement then choose this point
it one line enter same we will create
one line here enter
like the centerpoint take this fine take
the line outside enter here one inclined
line is needed enter from this point to
this point enter a thickness of this rib
is 12 we will copy this line on either
side copy select this line enter give
the first point how we want to go there
but it is not going in that direction
that means we will have to change the
ISO plane from here we will take the
left eye so plane let's plane left give
the direction you the distance of six
again give direction on this side use
the resource of six enter then extend
these lines for that click here and
choose extend then press enter and click
on the lines to explain enter in create
vertical lines here give the line
command L enter take in point create a
vertical line enter then we will need
one horizontal line I can give the line
command from this intersection point
change the plane we will need the top
leg then draw it here enter and trim the
unwanted portion again TR enter enter
and remove the unwanted portion
it's envy here
and it is this our key enter Aries now
this rib is also ready in this circle
internal circle of 24 diameter that is
12 radius
choose the excess and click on ISO
circle give the center point give the
radius of 12 enter and on this side it
is 36 that is 18 radius X is st. ISO
circle give the center point
give the radius of 18 enter then here
kiwis shown up to alibi for size
or that will copy this line by six on
either side copy select this line enter
give the base point give the direction
your the distance of six enter on that
side also six enter then from this point
we will have to create a line up for
length take the line come on take this
intersection give the direction give the
length of four enter take it inside and
click there enter then trim the unwanted
portion PR enter enter and remove the
unwanted portion and it is this in lines
a line is needed here take the line come
on you the first point change the plane
- right
go inside drag the end point and click
the enter then we will have to create
the center lines for that we will create
one Center layer click on layer
properties click on new layer make it
Center
give the color so I want a low okay
then line type load click inside press C
ok select Center okay close it select
this line and choose the center layer
and escape then evil TS enter wicket
fire they are properly visible then here
horizontal line will required on top
plane click here and choose the ISO
plane top take the line command drag the
center point and create horizontal lines
enter make the center layer current
take the line command click the center
point and click the points enter the
nice property the center line with this
slide in
thanks for watching we will stop