MicroStation Lesson-13 Video Lecture - Microstation Tutorials Beginner

let us now continue our coordinate
dimension option over here we have the
dimension ordinates option select this
after selecting the dimension ordinance
option next you need to specify the
origin that is for the finding out the
dimensions of the coordinates you need
to first select an origin I am selecting
the origin over here after selecting the
origin you need to specify the positive
direction of X in this way and now you
have the zero value that is the origin
to be placed right now you can see that
zero zero is being displayed over here
you need to specify the length of the
extension line I am holding down my
shift key and moving it in this way okay
but as I'm moving my view after which
I'll be placing the length of the
extension line over here at this
particular point and the point is fixed
after which now you can select the
points for which you want to find the
coordinates select it over here and you
get the 17.3 for as or denied by you
select it over here you get it as 36.0
to select it over here you get it in
this way then left click anywhere and
you will be getting those values when
you right click it accepts the given
values in this way next you can also
again specify this and this time I will
specify the origin over here and the
direction I am going in this Way's now
you can see the length comes
horizontally the length of the extension
line comes horizontally let me place it
over here and now after fixing the
extension lines length you can click
anywhere in the drawing say let me click
over here and this is 8.2 let me click
over here and this value is 17.5 - in
this value in this way I selected over
here and this value is displayed over
here as thirty point two one right click
to accept now after this I'll select my
cursor and now in order to check the
given values you can go with
dimensioning it let me select this
option and over here
I'll dimension this this is seventeen
point three four horizontally and that
is what is being displayed over here
again select it over here this time you
want to find out the distance from here
to here so if I select this I'll be
getting it as eighteen point six eight
that is nothing but the length of this
line only so in order to get it I'll
choose this option dimension size with
arrows first point the extension line
over here and till this particular point
that is nothing but your thirty six
point zero to the same values are being
displayed so this option is nothing but
your ordinates option the method is
first you need to specify the origin let
me choose the origin over here after
which you need to specify the direction
I was facing the direction in this way
and now you need to specify the ordinate
value sorry then length of the extension
line place it over here and now wherever
you click that particular points
distance will be displayed over here in
this way right click to accept it that
is nothing but your ordinate option let
us go with undo remove all the
coordinate values after this the next
option which we have over here is the
dimension angle size suppose you have a
few lines over here in this way one
horizontally and the lines are inclined
to it at particular angles in this way
now you can select this option over here
dimension angle size after which you're
supposed to select the start of
dimension this is the start of dimension
then it is asking as to specify the
length of the extension line I'll
specify the length of action and over
here and enter point on the axis say
this
now this dimension which you are getting
over here is nothing but your angle you
can see right now the value is being
displayed up to four decimals so four
digits after the decimal let me just go
with right-click and I'll change the
setting over here shortcut to settings
over here you have selected units
setting it to 0.12 for this over here
now after setting this over here for
degrees I need to select 0.12 as well
okay all right and now again let us go
with the selection of this particular
setting again from start we'll start
select this now it is asking you to
select start of dimension this is my
start of dimension next length of the
extension line somewhere over here next
and the point on axis this is the point
on axis through which all the lines will
be passing select this and now select
dimension endpoint that is still where
you want to find the dimension
selected till here or till here until
here in this way
right click to accept it you can see the
angle being given over here dangling
between a number of lines continuously
as it moves along the angular direction
along this particular direction this is
how you will be using the angular
dimensioning option select the line like
this from here you have this line you
have this line select this option first
point over here length of the extension
line over here and then at the point on
axis over here and this is the end point
of that particular line this is the end
point okay this is how you will be
dimensioning it in terms of the angle
right again similarly we have the other
option and that is this option dimension
angle location oh here I'm selecting the
start of dimension then the length of
the extension
and the point on the axis and again I'll
specify this point now after selecting
this when I go for the second option the
reference is being taken as the first
line itself as you keep on moving the
reference will remain as the first line
itself this particular almost horizontal
line which you have that will remain as
the reference from where the angles are
being measured you can see this over
here this 37 is from here to here
similarly 80 point to five you have it
from the reference previous reference
itself till this line in this way you
will be going with the angular
dimensioning okay
the next option over here is dimension
angle between let me draw two lines over
here I'm selecting one inclined line in
this way and one in train line at this
way after going to inclined lines you
have the dimension angle between option
okay select this after which I'm
selecting this line and this line
between two lines two inclined lines you
can directly get the angle in this way
that is your dimension angle between
option 98.7 degrees is over here select
it and place it over here between these
two you get it in this way or you can
move in this direction you will be
getting it the outside angle
included or excluded angle place it over
here and this is how you will be getting
the end for the circles we have seen how
to use it suppose you have a circle over
here a circle over here now you can
select this option you can either go
with diameter or radius Center mark
radius extended all these options we
have already seen you can place it over
here and give the particular value the
rest of the two options that is chain
dimension and my dimension attributes
let us see in the next session for now
I'm stopping the session over here