Open App

Class 10 Exam > Class 10 Videos > ELECTRICITY (FULL CHAPTER) | CLASS 10 CBSE

ELECTRICITY (FULL CHAPTER) | CLASS 10 CBSE Video Lecture

Q: 2. What are the different units used to measure electricity?

Ans. The different units used to measure electricity are:- Volt (V): It measures the electric potential or voltage.- Ampere (A): It measures the electric current.- Ohm (Ω): It measures the electrical resistance.- Watt (W): It measures the power or rate at which electrical energy is consumed or produced.- Kilowatt-hour (kWh): It measures the amount of electrical energy consumed or produced over a period of time.

Q: 3. What are the three types of circuits?

Ans. The three types of circuits are:- Series circuit: In a series circuit, the components are connected one after the other in a single path. The same current flows through all the components.- Parallel circuit: In a parallel circuit, the components are connected in multiple paths. The voltage across each component is the same, but the current splits among the components.- Combination circuit: A combination circuit is a combination of series and parallel circuits. It contains both series and parallel connections of components.

Top Courses for Class 10

View all

FAQs on ELECTRICITY (FULL CHAPTER) - CLASS 10 CBSE Video Lecture

1. What is electricity and how is it generated?

Ans. Electricity is the flow of electric charge through a conductor. It is generated through various methods such as: - Thermal power plants: They use fossil fuels like coal, oil, or natural gas to produce steam, which drives a turbine connected to a generator to generate electricity. - Hydroelectric power plants: They harness the energy of flowing or falling water to rotate a turbine and generate electricity. - Nuclear power plants: They use nuclear reactions to produce heat, which is then used to generate electricity. - Solar power: Solar panels convert sunlight into electricity through the photovoltaic effect. - Wind power: Wind turbines convert the kinetic energy of the wind into electrical energy.

2. What are the different units used to measure electricity?

Ans. The different units used to measure electricity are: - Volt (V): It measures the electric potential or voltage. - Ampere (A): It measures the electric current. - Ohm (Ω): It measures the electrical resistance. - Watt (W): It measures the power or rate at which electrical energy is consumed or produced. - Kilowatt-hour (kWh): It measures the amount of electrical energy consumed or produced over a period of time.

3. What are the three types of circuits?

Ans. The three types of circuits are: - Series circuit: In a series circuit, the components are connected one after the other in a single path. The same current flows through all the components. - Parallel circuit: In a parallel circuit, the components are connected in multiple paths. The voltage across each component is the same, but the current splits among the components. - Combination circuit: A combination circuit is a combination of series and parallel circuits. It contains both series and parallel connections of components.

4. What is the role of conductors and insulators in electricity?

Ans. Conductors are materials that allow electric charge to flow through them easily. They have free electrons that can move from atom to atom when an electric potential is applied. Examples of conductors include metals like copper and aluminum. Insulators, on the other hand, are materials that do not allow electric charge to flow through them easily. They have tightly bound electrons that do not move easily. Examples of insulators include rubber, plastic, and wood. Insulators are used to prevent the flow of electric current, while conductors are used to facilitate the flow of electric current.

5. What are the safety precautions to be taken while dealing with electricity?

Ans. When dealing with electricity, it is important to follow certain safety precautions to avoid accidents or electric shocks. Some of these precautions include: - Avoid touching electrical appliances or switches with wet hands. - Do not overload electrical sockets or extension cords. - Keep electrical cords away from heat sources or water. - Use insulated tools when working with live electrical circuits. - Switch off the power supply before repairing or replacing electrical components. - Install residual current devices (RCDs) or ground fault circuit interrupters (GFCIs) to protect against electric shocks. - Regularly check and maintain electrical equipment and wiring to prevent any potential hazards.

Related Exams

Class 10

About this Video

Nov 14, 2024 Last updated

ELECTRICITY (FULL CHAPTER) | CLASS 10 CBSE for Class 102024 is part of Class 10 preparation. The notes and questions for ELECTRICITY (FULL CHAPTER) | CLASS 10 CBSE have been prepared according to the Class 10 exam syllabus. Information about ELECTRICITY (FULL CHAPTER) | CLASS 10 CBSE covers all important topics for Class 102024 Exam. Find important definitions, questions, notes, meanings, examples, exercises and tests below for ELECTRICITY (FULL CHAPTER) | CLASS 10 CBSE.

Introduction of ELECTRICITY (FULL CHAPTER) | CLASS 10 CBSE in English is available as part of our Class 10 preparation & ELECTRICITY (FULL CHAPTER) | CLASS 10 CBSE in Hindi for Class 10 courses. Download more important topics, notes, lectures and mock test series for Class 10 Exam by signing up for free.

Description

Video Lecture & Questions for ELECTRICITY (FULL CHAPTER) | CLASS 10 CBSE Video Lecture - Class 10 full syllabus preparation | Free video for Class 10 exam.

Information about ELECTRICITY (FULL CHAPTER) | CLASS 10 CBSE

Here you can find the ELECTRICITY (FULL CHAPTER) | CLASS 10 CBSE defined & explained in the simplest way possible. Besides explaining types of ELECTRICITY (FULL CHAPTER) | CLASS 10 CBSE theory, EduRev gives you an ample number of questions to practice ELECTRICITY (FULL CHAPTER) | CLASS 10 CBSE tests, examples and also practice Class 10 tests.

Explore Courses for Class 10 exam

Signup for Free!

Signup to see your scores go up within 7 days! Learn & Practice with 1000+ FREE Notes, Videos & Tests.

Start learning for Free

10M+ students study on EduRev

mock tests for examination

Extra Questions

Exam

shortcuts and tricks

practice quizzes

Semester Notes

ELECTRICITY (FULL CHAPTER) | CLASS 10 CBSE Video Lecture

Previous Year Questions with Solutions

ppt

pdf

past year papers

Viva Questions

Important questions

Objective type Questions

ELECTRICITY (FULL CHAPTER) | CLASS 10 CBSE Video Lecture

study material

MCQs

video lectures

Free

Sample Paper

Summary

;

Study ELECTRICITY (FULL CHAPTER) | CLASS 10 CBSE on the App

Students of Class 10 can study ELECTRICITY (FULL CHAPTER) | CLASS 10 CBSE alongwith tests & analysis from the EduRev app, which will help them while preparing for their exam. Apart from the ELECTRICITY (FULL CHAPTER) | CLASS 10 CBSE, students can also utilize the EduRev App for other study materials such as previous year question papers, syllabus, important questions, etc. The EduRev App will make your learning easier as you can access it from anywhere you want. The content of ELECTRICITY (FULL CHAPTER) | CLASS 10 CBSE is prepared as per the latest Class 10 syllabus.

Education Revolution