Torque and Angular Momentum Video Lecture - NEET

Welcome to the presentation
on torque.
So, if you watched the
presentation on the center of
mass, which you should have, you
might have gotten a little
bit of a glancing view
of what torque is.
And now we'll do some
more in detail.
So in general, from the center
of mass video, we learned, if
this is a ruler and this is the
ruler's center of mass.
And if I were to apply force at
the center of mass, I would
accelerate the whole ruler in
the direction of the force.
If I have the force applying at
the center of mass there,
the whole ruler would accelerate
in that direction.
And we'd figure it out by
taking the force we're
applying to it and dividing
by the mass of the ruler.
And in that center of mass
video, I imply-- well, what
happens if the force
is applied here?
Away from the center of mass?
Well, in this situation, the
object, assuming it's a free
floating object on the Space
Shuttle or something, it will
rotate around the
center of mass.
And that's also true, if we
didn't use the center of mass,
but instead we fixed
the point.
Let's say we had
another ruler.
Although it has less height
than the previous one.
Instead of worrying about its
center of mass, let's say that
it's just fixed at
a point here.
Let's say it's fixed here.
So if this could be the hand
of a clock, and it's nailed
down to the back of the
clock right there.
So if we were trying to rotate
it, it would always rotate
around this point.
And the same thing
would happen.
If I were to apply a force at
this point, maybe I could
break the nail off the back of
the clock, or something, but I
won't rotate this needle or
this ruler, or whatever you
want to call it.
But if I would apply a force
here, I would rotate the ruler
around the pivot point.
And this force that's applied a
distance away from the pivot
point, or we could say from the
axis of rotation, or the
center of mass.
That's called torque.
And torque, the letter for
torque is this Greek, I think
that's tau, it's a curvy T.
And torque is defined as
force times distance.
And what force and what
distance is it?
It's the force that's
perpendicular to the object.
I guess you could say to
the distance vector.
If this is the distance vector--
let me do it in a
different color.
If this is the distance vector,
the component of the
force is perpendicular to
this distance vector.
And this is torque.
And so what are its units?
Well, force is newtons, and
distance is meters, so this is
newton meters.
And you're saying, hey Sal,
newtons times meters, force
times distance, that looks
an awful lot like work.
And it's very important to
realize that this isn't work,
and that's why we won't
call this joules.
Because in work, what
are we doing?
We are translating an object.
If this is an object, and I'm
applying a force, I'm taking
the force over the distance
in the same
direction as the force.
Here the distance and
the force are
parallel to each other.
You could say the distance
vector and the force vector
are in the same direction.
Of course, that's
translational.
The whole object
is just moving.
It's not rotating or anything.
In the situation of torque,
let me switch colors.
The distance vector, this is the
distance from the fulcrum
or the pivot point of the center
of mass, to where I'm
applying the force.
This distance vector is
perpendicular to the force
that's being applied.
So torque and work are
fundamentally two different
things, even though their
units are the same.
And this is a little
bit of notational.
This distance is often called
the moment arm distance.
And I don't know where
that came from.
Maybe one of you all can write
me a message saying where it
did come from.
And often in some of your
physics classes they'll often
call torque as a moment.
But we'll deal with
the term torque.
And that's more fun, because
eventually we can understand
concepts like torque
horsepower in cars.
So let's do a little bit of
math, hopefully I've given you
a little bit of intuition.
So let's say I had this ruler.
And let's say that this is its
pivot point right here.
So it would rotate around
that point.
It's nailed to the wall
or something.
And let's say that I apply a
force-- Let's say the moment
arm distance.
So let's say this distance,
let me do it
in different color.
Let's say that this distance
right here is 10 meters.
And I were to apply a force of 5
newtons perpendicular to the
distance vector, or to dimension
of the moment arm,
you could view it either way.
So torque is pretty easy
in this situation.
Torque is going to be equal to
the force, 5 newtons, times
the distance, 10.
So it would be 50
newton meters.
And you're probably saying,
well, Sal, how do I know if
this torque is going to be
positive or negative?
And this is where there's just a
general arbitrary convention
in physics.
And it's good to know.
If you're rotating clockwise
torque is negative.
Let me go the other way.
If you were rotating
counterclockwise, like we were
in this example, rotating
counterclockwise, the opposite
direction of which a clock
would move in.
Torque is positive.
And if you rotate clockwise
the other
way, torque is negative.
So clockwise is negative.
And I'm not going to go into
the whole cross product and
the linear algebra of torque
right now, because I think
that's a little bit
beyond the scope.
But we'll do that
once we do more
mathematically intensive physics.
But, so, good enough.
There's a torque of
50 newton meters.
And that's all of the torque
that is acting
on this object .
So it's going to rotate
in this direction.
And we don't have the tools yet
to figure out how quickly
it will rotate.
But we know it will rotate.
And that's vaguely useful.
But what if I said that the
object is not rotating?
And that I have another
force acting here?
And let's say that that force
is-- I don't know, let me make
up something, that's 5
meters to the left
of the pivot point.
If I were tell you that this
object does not rotate.
So if I tell you that the object
is not rotating, that
means the net torque on this
ruler must be 0, because it's
not-- its rate of change of
rotation is not changing.
I should be a little exact.
If I'm applying some force here,
and still not rotating,
then we know that the net torque
on this object is 0.
So what is the force
being applied here?
Well, what is the net torque?
Well, it's this torque, which
we already figured out.
It's going in the clockwise
direction.
So it's 5-- Let me do it
in a brighter color.
5 times 10.
And then the net torque.
The sum of all the torques
have to be equal to 0.
So what's this torque?
So let's call this f.
This is the force.
So, plus-- Well, this force is
acting in what direction?
Clockwise or counterclockwise?
Well, it's acting in the
clockwise direction.
This force wants to make the
ruler rotate this way.
So this is actually going
to be a negative torque.
So let's say, put a negative
number here times f, times its
moment arm distance, times
5, and all of this
has to equal 0.
The net torque is 0, because the
object's rate of change of
rotation isn't changing, or if
it started off not rotating,
it's still not rotating.
So here we get 50 minus
5 f is equal to 0.
That's 50 is equal to 5 f.
f is equal to 10.
If we follow the units all the
way through, we would get that
f is equal to 10 newtons.
So that's interesting.
I applied double the force
at half the distance.
And it offsetted half the force
at twice the distance.
And that should all connect, or
start to connect, with what
we talked about with mechanical
advantage.
You could view it
the other way.
Let's say these are people
applying these forces.
Say this guy over here is
applying 10 newtons.
He's much stronger.
He's twice as strong as
this guy over here.
But because this guy is twice
as far away from the pivot
point, he balances
the other guy.
So you can kind of view it
as this guy having some
mechanical advantage or having
a mechanical advantage of 2.
And watch the mechanical
advantage videos if that
confuses you a little bit.
But this is where to
torque is useful.
Because if an object's rate of
rotation is not changing, you
know that the net torque
on that object is 0.
And you can solve for the
forces or the distances.
I'm about to run out of
time, so I will see
you in the next video.