Fun Video: All about Friction(in detail) Video Lecture | Science Class 8

This episode of Crash Course Physics
is sponsored by Audible.
If you watched our episode on Newton’s laws
of motion,
then you’re practically an expert on FORCES,
and the way they make things accelerate.
But there’s something we left out --
something important when you’re trying to
describe how things move in real life:
FRICTION.
It stops a baseball player sliding into home plate.
And it’s the reason I can pick up this cup without it slipping through my fingers.
Without friction, it would be tough to do
… almost anything.
But it also makes doing OTHER things…pretty
hard.
Anyone who has moved furniture knows that.
Luckily, friction is also a force, so, as
physicists, we know what to do with it.
[Theme Music]
You’re moving into a new house, and you ask a friend to come help out, which he does, because he’s just nice like that.
And you really do need his help, because you’ll
have to move giant bookcases and a desk,
and you can’t do all of that on your own.
And about halfway through the move-in, you’re rearranging the furniture in your new bedroom
when you run into a problem:
You’re pushing and pushing on your bookcase,
but it just not sliding across the floor.
So you call your friend over from the other room, and with both of you pushing, the bookcase finally starts to slide.
But it was really hard to get it moving -- and
stay moving -- because there’s a force working
against you - stopping the bookcase from sliding:
friction.
And there are actually two kinds of friction.
First, there’s KINETIC friction -- that’s
the force that slows the bookcase down as it slides.
And there’s also STATIC friction — the force you had to overcome to get it moving in the first place.
So let’s talk about kinetic friction first.
It’s a resistive force, which just means
that no matter what, it’ll act to resist you.
In other words, if you push the bookcase so
it slides to the left, then the force of kinetic
friction is acting to the right.
But if you move the bookcase to the right,
then the friction will resist to the left.
Kinetic friction will also often generate
heat or sound or both.
So, what causes it?
The bookcase and the wood floor might LOOK
smooth, but if you looked at their surfaces
under a microscope, you’d see that they’re
covered in tiny bumps and grooves.
As the bookcase slides across the floor, the
surfaces catch on each other,
and might even start to form weak intermolecular
bonds. That pulls on the bookcase, slowing it down.
But as the bookcase continues to slide, it breaks those bonds and moves past whatever bumps it was stuck on.
The newly-freed molecules start to spring back,
and the movement produces heat and sound.
Then the cycle continues with
the next patch of floor.
You end up with a force that resists any kind
of sliding movement, and its strength depends
partly on what materials are sliding against
each other.
Rougher materials have more surfaces to catch
on each other, which is why the bookcase will
be easier to slide on the wood floor than
if you’d tried it on carpet.
And the way in which this roughness affects kinetic friction is called the coefficient of kinetic friction,
and it’s different for pretty much every
combination of materials.
But there’s another factor at work in friction:
How hard the materials are pressed together puts more of their surfaces in contact with each other.
And that’s where the normal force, or F_N,
comes in.
You might remember from our last episode,
that when a force pushes a bookcase against
the floor, the floor pushes right back.
That’s Newton’s third law, and we call the force from the floor on the bookcase the NORMAL FORCE.
In this case, the force from the bookcase
on the floor is just its weight, mg.
So the normal force would be equal to mg,
but pointing up -- equal and opposite.
So - Now we know about the two main factors
that affect the strength of kinetic friction:
the coefficient of kinetic friction -- written
as mu_k -- and the normal force, F_N.
It shouldn’t be too surprising, then, that
the equation for kinetic friction is just…
the coefficient times the normal force.
But that’s only half the picture.
What about static friction?
When you weren’t able to move the bookcase
to begin with, that was because of the static
friction between the bookcase and the floor.
Like kinetic friction, it’s also a resistive force.
But not only can its direction change
-- its strength can, too.
Say you push on the bookcase lightly, with
just one hand, and it doesn’t move.
Since it doesn’t have any acceleration,
the bookcase must be in equilibrium --
meaning that the forces on it balance out.
So the force from static friction must be
exactly equal to the force from your hand,
but in the opposite direction -- because of
that equilibrium.
It’s not the same as the normal force, and
it has nothing to do with Newton’s third law.
But say you really put your back into it,
pushing as hard as you can.
The bookcase still doesn’t move, so static friction must still be pushing back with the same amount of force you are.
However, the static friction between two objects
can change:
Once your friend starts pushing too, the bookcase
starts to slide, because the force from your
teamwork is greater than the maximum amount
of static friction -- which we write like this.
And the relationship between the maximum static
friction and the normal force is similar to
the relationship between kinetic friction
and the normal force.
There’s even a coefficient of static friction,
which measures the roughness between any two
objects -- and we just write it as mu_s.
And the maximum force of static friction is just equal to the coefficient of static friction times the normal force.
So now we know the equations for both
kinds of friction and where they come from.
Which means we can use that information to figure
out how to solve problems involving friction.
Just like with the other force-related
problems, we start with a free body diagram.
That helps sort out what’s pushing where,
so we can get an overview of the situation.
Next, we decide on some axes: where are x
and y? And which way is positive?
That’ll be useful when ramps come up, because
if we want, we can just decide that x points
down the ramp and y points straight into it.
The next thing we’ll need to do is separate
vectors into components along our new x and y axis
because strange things happen to the normal force when you have something (like that bookcase) sitting on a ramp.
The normal force is pointing out of the ramp,
because it’s perpendicular to the surface,
but it’s NOT equal and opposite to the force
of gravity, because THAT'S pointing straight down.
Instead, we’ll have to use trigonometry
to separate the force of gravity into two
perpendicular components: one pointing down
along the ramp, and one pointing into it.
Then, the normal force will just be equal
and opposite to the part of the gravitational
force that’s pointing into the ramp.
So, here’s how to separate and diagram everything
that’s going on:
The angle between the force of gravity and the
component pointing into the ramp is called theta.
And it’s the same as the incline
of the ramp.
Those make two sides of a right triangle.
And since the component pointing into the
ramp is adjacent to the angle, we know that it’s equal to
(mg) x (the cosine of that angle)
-- and so is the normal force.
The other component, pointing ALONGSIDE the
ramp, is OPPOSITE the angle.
So, again using trigonometry, we know that
it’s equal to (mg) x (the sine of the angle).
So! You’ve drawn your free-body diagram,
you’ve decided on axes, and separated the
force of gravity into two useful components.
Now, we can finally set up our equations!
That’s where Newton’s second law --
F(net) = ma -- comes in handy.
There’ll actually be two of these -- one
for the x direction, down the ramp, and one
for the y direction, into the ramp.
So let’s say you’ve got the bookcase where
it needs to go, and now you’re ready to
get something else out of the moving van -- this time, a 40-kilogram box with a very fragile vase inside it.
It’s heavy, so let’s say you put it down
on the ramp leading from the back of the truck
to the ground -- which happens to be angled at 30 degrees -- and then walk away to get a drink of water.
You also happen to know that the coefficient of static friction between the box and the ramp is 0.50.
What is the box’s acceleration?
If it’s zero, it’ll stay put and your
vase should be okay when you walk away from it.
If not, that means the box will start sliding down the ramp, and you may have a problem.
The first thing we need to do is draw a free-body diagram of this box.
For our coordinate system, we’ll have x along the ramp, with the positive side at the bottom,
and y perpendicular to the surface of the ramp,
with the positive side also toward the bottom.
And we have a whole bunch of forces here:
The normal force is pointing out of the ramp.
There’s also the force of static friction,
which, right now is pointing up the ramp -
since it’s resisting the part of the
gravitational force pulling the box down.
Speaking of which: the force of gravity is
pointing straight down --
NOT along either of our axes, so we
separate it into components:
(mg)(cos)(theta) pointing into the ramp, and
(mg)(sin)(theta) pointing down along the ramp.
Now we set up our net force equations along
each axis:
The box isn’t going anywhere along the y
axis -- nothing’s going to make it start
rising above the surface of the ramp, right?
So we know that all the forces acting along the y axis should add up to zero, since they’re all balanced out.
But the forces along the x axis, along the
ramp, are a different story.
If the box has no acceleration (it’s standing still, or moving at a constant velocity) they’ll also add up to zero.
But if it DOES have acceleration along the ramp, then the forces will add up to its mass, times that acceleration.
So, to figure out if the box slides, all we need to do is find out if the part of the gravitational force
pushing it down the ramp, (mg)(sin)(theta),
is greater than the maximum static friction resisting it.
In other words: if down the ramp is the positive
direction, is the net force positive or zero?
The forces here are the gravitational force
pushing the box down the ramp, (mg)(sin)(theta),
and the maximum static friction. But we write
the maximum static friction as negative, because
it’s pointing in the negative direction
on our x-axis -- up the ramp.
So, adding them together, we get this equation.
Multiplying together the different values
that make up (mg)(sin)(theta),
we find that it’s equal to 196.20 Newtons.
And the maximum static friction is just equal
to the coefficient of (static friction) x
(the normal force) -- so, plugging in the
numbers, we find that it’s 169.91 Newtons.
Which means that the net force is 26.29 Newtons.
So, yes, there’s a net force pushing the
box down the ramp, and it’s going to slide.
Which means I have some bad news for you about
that vase...
But today, you learned about the two types
of friction:
kinetic friction and static friction,
and how they act to resist applied forces.
We also talked about how to use friction to
describe an object’s motion,
including how to calculate the normal force
when that object’s on a ramp.
Finally, we calculated whether a box on a
ramp would start sliding down.
This episode of Crash Course Physics is supported by Audible.com
Right now, AUDIBLE is offering viewers a 30-day trial period. JUST go to audible.com/crashcourse.
You can access their audio programs and titles, like THIS book - The Tao of Physics by Freetyoff Capra.
My plan is to listen to this on my flight back home this week… it’s a long flight.
Go to audible.com/crashcourse – and make sure you use that link to help us out, and to get your membership trial.
Crash Course Physics is produced in association with PBS Digital Studios.
You can head over to their channel to check out amazing shows like Deep Look, The Good Stuff, and PBS Space Time.
This episode of Crash Course was filmed in
the Doctor Cheryl C. Kinney Crash Course Studio
with the help of these amazing people and
our Graphics Team is Thought Cafe.