In PERT, the distribution of activity times is assumed to be
The result of Vee-Bee test is expressed in terms of:
1 Crore+ students have signed up on EduRev. Have you? Download the App |
Consider the following PERT network:
The optimistic time, pessimistic time and most likely time of all the activities are given in the table below:
The critical path duration of the network (in days) isn and avoid building up of pressure.
The variation of rigidity factor for a tyre pressure is stated as:
A simply supported beam of length 'I' is loaded by a uniformly distributed load over the entire span. It is propped at mid span so that the deflection at centre is zero. The reaction at prop is
Which one of the following statements is true with regard to the flexibility method of analysis?
Two metal plates of thickness ‘t’ and width ‘w’ are joined by a fillet weld of 45° as shown below. When subjected to a pulling force ‘F’, the stress induced in weld is
Under dynamic loading, the soil most likely to be affected is
In the following questions two statements are given. Read them carefully and choose from the options given below:
a) Both I and II are true and II is the correct explanation of I.
b) Both I and II are true and II is NOT the correct explanation of I.
c) I is true but II is false.
d) I is false but II is true.
Statement (I): Aerated concrete is used in RCC multistored construction.
Statement (II): Dead weight of a structure can be reduced by using light weight concrete.
The principle of virtual work can be applied to elastic system by considering the virtual work of
2400 m3 of water passes through a sedimentation tank which has the rate of flow 300 cubic meter per day. The detention time for the tank is:
Indicate the incorrect statement:
In a boundary layer flow-
In the following questions two statements are given. Read them carefully and choose from the options given below:
a) Both (A) and (R) are true and (R) is the correct explanation of (A).
b) Both (A) and (R) are true and (R) is NOT the correct explanation of (A).
c) (A) is true but (R) is false.
d) (A) is false but (R) is true.
Assertion (A): The angle section and channel section are not efficient beam sections.
Reason (R): In I-section higher percentage of material concentration in the flange results in lesser elastic section modulus for the same mass per unit length.
In the following questions two statements are given. Read them carefully and choose from the options given below:
a) Both (A) and (R) are true and (R) is the correct explanation of (A).
b) Both (A) and (R) are true and (R) is NOT the correct explanation of (A).
c) (A) is true but (R) is false.
d) (A) is false but (R) is true.
Assertion (A): The sewage through inverted siphon flows under gravity and at a greater gradient than normal.
Reason (R): The inverted siphon is usually made of three pipe sections laid side by side in plan.
M3 profile is indicated by which of the following conditions?
The kinematic indeterminacy of the beam shown below is
Which of the following are used for transporting concrete?
1. Chutes
2. Concrete pumps
3. Transit mixers
4. Scarper
Consider the following statements:
While deciding to locate an intake structure for water supply to a city situated on a river bank, intake for water supply should be located
Which of the above statements are CORRECT?
Turning of the theodolite telescope in horizontal plane by 180° about vertical axis is known as
Consider the following statements:
Which of the above statements is(are) CORRECT?
For a sleeper density of of (n + 5), number of sleepers required for constructing a broad gauge (BG) track of length 780 m will be
A direct runoff hydrograph due to a storm idealized into a triangular shape has a peak flow 50 m3/s occurring at 30 hours from start. If the base width of hydrograph is 80 hours and catchment area is 1000 km2 then the runoff from the storm is
The design shear capacity of ISMC 75 beam having web thickness of 4.4 mm is (The beam is made up of Fe 410 steel)
The ILD for bending moment at C in the beam shown below
A simply supported beam of span l is carrying a uniformly distributed load w per unit run for a distance l/2 from one support. The deflection at center will be
Which of the following material is not used in stabilisation of soil?
Consider the following statements:
Which of the above statements is(are) CORRECT?
A harbour model has a horizontal scale of 1 in 150 and vertical scale of 1 in 100. The interval between successive daily high tide in the model will be nearly: