A RC column 4m long and 400mm in dia is reinforced by 8 bar of the 20mm dia, find the safe load, the column can carry, (σsc = 4N/mm2, σse = 130N/mm2)
1 Crore+ students have signed up on EduRev. Have you? Download the App |
While estimating for plastering, usually no deduction is made for:
A column is a compression member, the effective length of which exceeds
A beam is defined as a structural member subjected to -
Crushing strength of good building stone should be more than -
In the following question, select the related letters/number from the given alternatives.
GREAT : 25 : : NUMBER : ?
The moment of inertia of a circular area of radius r with respect to diameter axis is
The slenderness limit for simply supported or continuous beam to ensure lateral stability is:
If the maximum bending moment of a simply supported slab is M kg-cm, the effective depth of the slab is-
When slenderness ratio in column lies between 32 to 120, it is known as-
A column is a compression member, the effective length of which exceeds three times its least lateral dimension. This is applicable to-
The process involved in Chlorination before breakpoint chlorination are-
The line drawn through the points of the same declination is called-
Given that the base period is 120 days and the duty of the canal is 1100 hectares per cumecs, the depth of water will be
The maximum spacing of vertical reinforcement in the RCC wall should not exceed
The ozonation in drinking water helps to remove
The modulus of elasticity of steel is more than that of concrete. It indicates that steel is
Bernoulli's equation refers to the conservation of-
For an irrigational flow, the velocity potential lines, and the streamlines are always-
To avoid segregation, fresh concrete should be dropped from a height of-
The distribution system in water supplies is designed on the basis of:
The flow of water in a wash hand basin when it is being emptied through a central opening, is an example of-
Modulus of subgrade reaction using 30 cm diameter plates is obtained as 200 N/cm3. The value of the same (in N/cm3) using the standard plate will be
If W is the load in a circular slab of radius R, the maximum radial moment at the center of the slab is